85919 REPAIRS TO ROAD AND CONNECTED WORKS TO AREA OF AGE B/R-III UNDER GE (SOUTH) PUNE

Amount

M&L for repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud & water, for scoring sunken surfaces in roads, paths etc cutting around all edges to at least 25mm in depth, making good by filling in screened and graded road metal, applying tack coat with bituminious primer of 5 kg per 10 sqm, putting in providing bituminious premix asphaltic semi dense concrete (design mix) 25mm consolidated thickness with 5.5% binder content by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and directed.

M&L for moorum /red Bajri in road side berms, avg thickness 100mm spread, rolled and consolidated to gradient and camber complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm exc 50mm and not exc 100mm deep and removing the same to a distance not exc. 50m and stacking where directed complete all as specified and as directed.

M&L for 75mm thick WBM (compacted thickness) with sand stone coarse aggregate of grading 2 (63 to 40mm size) or of grading 3(50 to 20mm size) of granite, trap or basalt, spread, rolled and consolidated to required gradient and camber including preparation of surface of WBM and applying a tack coat of VG-10 bitumen @ 7.5Kg/10Sqm complete all as specified & directed.

M&L for providing premix bituminious macadam (consolidated thickness not more than 75mm) with 4% of binder content of paving bitumen of grade VG-30, by weight of total mix, laid and rolle with 8 to 12 tonne vibrating power roller to required gradient and camber upto outer edges of road on existing black top surfaces complete all as specified and directed. (Note : Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver complete all as specified and directed)

M&L for Preparing black top surfaces of road with wire brushing for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming tack coat with bitumen primer of bitumen grade VG-10 @ 2.5 kg per 10 sqm and providing and laying bituminous premixed semi-dense asphaltic concrete 40 mm thick (consolidated thickness) with 5.5 % paving bitumen of grade VG-30, binder content by weight of total mix, rolled and compacted to required gradieent & camber using 8 to 12 tonne power roller complete all as specified and directed.

M&L for Preparing black top surfaces of road with wire brushing for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc applying evenly a priming tack coat with bitumen primer of bitumen grade VG-10 @ 5.0 kg per 10 sqm and providing and laying bituminous premixed semi-dense asphaltic concrete 40 mm thick (consolidated thickness) with 5.5 % paving bitumen of grade VG-30, binder content by weight of total mix, rolled and compacted to required gradieent & camber using 8 to 12 tonne power roller complete all as specified and directed.

M&L for applying thermoplastic paint 3mm thick for making lines, dashes, arrows, letters etc exceeding 10cm wide on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sign glass beads @ 250 gms per Sqm area confirming to MORTH & BIS specification, not less than 2.5mm thick of white/golden/ yellow as approved colour/ shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt oil grease etc complete all as specified and directed by Engineer incharge

Supply and fixing in repair "LED Kerbstone” with LED lighting system as per specification – load bearing capacity 2200 kgs (with test report of government approved lab) length 500mm , height 240mm, width – 150mm, curb angle 45 degree, foundation height – 40mm, foundation legs – 4, foundation led stand with 20mm embded in cement concrete 1:2:4 type B-1, foundation nut and bolt – 4 nos (8mm x 60mm), led strip length 465 mm, operating voltage- 36 volts, number of led in each led strip – 22 nos, led strip wattage–2.32 watt per kerb stone, IP-68 waterproof and shockproof kerbstone, led strip and connectors with heat shrinkable waterproof sleeve, led strip and connectors–IP 68, IP-68 waterproof connectors for each kerb stone- 1 nos, jacketed connector wire with copper cable of 1.5 Sqmm 2 core, fiber box with 02 pole 10 Amp MCB for power supply of 36 volts colour – white , blue, yellow, orange, red, green or as per requirement and as per IRC including embedded 50 mm in and converted at bottom with PCC (1:2:4) type B-2 finished neatly and setting the same in CM 1:2 including necessary required excavation and earth work in any type of strata and and redoing the existing surface in its original shape etc all as specified and directed. (NOTE -: Quoted rate is deemed to be included for all necessary electrical connection from nereby street light / pole and 01 year guarantee from manufacturer)

S & F in repairs precast kerb stone, using PCC Type B0, 1:2:4 (using 12.5mm graded stone aggregate), factory made size 450 x 300 x 150 mm thick set in CM (1:3) complete including necessary excavation, tamping ground and removal of surplus soil to a distance not exceeding 50m complete all as specified and as directed.

M&L for filling joints of road in repairs 30mm deep and 10mm wide filled with sealing compound Grade A complete including scraping and cleaning of existing joint with wire brush all as specified and directed

Supply and fix in repairs cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufacturers instructions complete all as specified and as directed.

S&F in repair sloar stud of size 125x125x25 mm with shank of 60mm aluminium alloy shell with 3 LED on each side with compressive strength upto 20 Ton fixing by epoxy complete all as specified and directed by Engineer in Charge.

Supply and fix in repairs metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150mm x 150mm x 300mm) type B1 and necessary earth work complete all as specified and directed.

M&L for providing a series of rumbles 10cm wide and 10mm thick(5 layers of 2mm thick each) on bitumen/concrete road made of ashphaltic thermo bitominous road marking paint(any colour) including necessary preparation of existing surface complete all as specified and directed

S&F Spring post / reflractive barriers / reboundable delineator of Model OS-804 750 height complete all as specified and directed.

M&L for preparing of old/ new surfaces of kerb stone and applying a coat of synthetic enemel emulsion over a coat of primer complete all as specified and as directed.

Carrying out measurement of roughness as per Provn laid down in IRC SP-16-2019. Contractor will engage certified consultants / testing agency and IRI resurfacing value before resurfacing and get particlar road length approved by GE for resurfacing before execution complete all as specified and directed.

All as per Ser. Item No. 18.00 above but after completion of resurfacing and comparison wih previous data. The IRI value obtained post resurfacing shold have IRI value for "Good" quality post resurfacing complete all as specified and as directed. (NOTE FOR SER. ITEM NO. 18 & 19 ABOVE: Measurement of road roughness shall be carried out by SEMT wing CME Pune / Govt. Approved and NABL accredited testing agency)

M&L for Machine pressed precast concrete interlocking paver block 60mm thick glosy finish, any shape and size confirming to IS-15658-2006 of 60mm thick,M-35 Grade chemically coloured with gray cement laid with and over 75mm thick stone dust/grit incl demolition of existing PCC and removal of debris outside the MD land complete all as specified and directed.

M&L for 75mm plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of interlocking tiles complete all as specified and directed.

S & F chequered cement concrete tile 300x300x25 mm thk glossy finish/rubber moulded set and jointed in neat cement slurry and pointed in grey cement & pigment with and over screed bed 20mm thick in cm 1:6 including demolition of existing PCC and removal of debris outside of the MD land complete all as specified and directed.

Taking down old unserviceable sign board and S&F retro reflective sign board of size 4' x 3' fixed both sides on stainless steel board made out of aluminium composite panel (ACP) sheet, 3mm thick fixed on SS-304 series hollow tubular section, 38mm dia. The board shall be provided with reflective tape of quality high intensity chequered type blue colour, letter/symbol shall be written in white colour writing of approved shape. The sign board shall be supported on 2 NOs post of 60mm dia stainless steel pipe, 304 series 3mtr long with round moulded design on top duly embedded in ground of size 450x450x600mm in PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) including necessary excavation/earthwork etc as directed by Engineer-in-Charge.

S&F mild steel framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders: framed balusters, wall ways, railings, frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 including dismantling of existing unserviceable iron work complete all as specified and directed.

M&L for preparing new surfaces of steel over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint (ordinary tint) over a coat of red oxide primer complete all as specified and as directed.

M&L for PCC 1:2:4 Type B1 (using 20mm graded stone aggregate) as in benching, kerbs, bed blocks or mud stops rounded or chamfered finished complete all as specified and directed.

SARATH ENTERPRISES (BID ID -3123904)

MOHANLAL MATHRANI CONS. PVT. LTD. (BID ID -3110324)

ShreHari Civil Enginneering and Contractors (BID ID -3117665)

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED (BID ID -3118609)