Construction of room for PSA oxygen plant and manifold system at C.H.C Tauni Devi Distt. Hamirpur

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m(one point five metre) in width or 10 sqm(ten square metre) on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m(one point five metre), including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m(fifty metre) Ordinary rock as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (one Cement : four coarse sand) : eight graded stone aggregate 40 mm(forty millimetre) nominal size) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm(forty millimetre) nominal size) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (one cement : one point coarse sand): three graded stone aggregate 20 mm(twenty millimetre) nominal size)as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (one cement : four coarse sand)as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

15 mm(fifteen millimetre) cement plaster on the rough side of single or half brick wall of mix :1:4 (one cement: four fine sand)and as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes and as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete and as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm(zero point fifty millimetre) (+ 0.05 %) total coated thickness with zinc coating 120(one hundred twenty) grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12(tweleve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) (five point five into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm(one point fifty millimetre) (+0.05 %) total coated thickness, Zinc coating 120(one hundreed twenty) grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :12.51.1 Ridges plain (500(five hundred) - 600mm(six millimetre)) and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts.

Providing and fixing polycarbonated transparent sheet 8mm (eight millimetre) thick in roofing with galvenised J or L hooks bolts and nuts with G.I limpet and bitumen rubber washer complete with all accessories as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and fixing expanded metal 20x60 mm(twenty into sixty millimetre) strands 3.25 mm(three point twenty five millimetre) wide and 1.6mm(one point six millimetre) thick for windows etc.including 62 x19 mm(sixty two into nineteen millimetre) beading of II nd class teak wood and priming coat with approved steel primer all complete.as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete 35 mm(thirty five millimetre) thick shutters as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm(two hundred fifty into sixteen millimetre)as per direction of Engineer-incharge.35 mm(thirty five millimetre) thick shutters as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm (two hundred fifty into ten millimetre)and as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm (one hundred twenty five) and as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm(forty millimetre) thick with 20 mm(twenty millimetre) nominal size stone aggregate and as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm(one millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50(fifty) grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour two coats as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns,etc. for mass concrete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana, tol tax, GST or other taxes imposed by the Government.

Sourabh Pathania Govt Contractor