Repairing of existing CCTV Camera System, Audio Visual Conference System and Non Comprehensive Maintenance of FAFD and VESDA System at Technical area and offices at the various offices of CGM CN Tx North, New Delhi. Ch. to Maintenance Head

Repairing and replacement of following items of existing audio visual conference system installed at committee hall etc. complete as reqd.

Delegate unit of audio conference system

8 Pin connector cable

HDMI cable (5 Metre.)

Attending the complaint of existing CCTV system on call and visiting the location, checking the system, diagnosed the fault occurred and rectifying the same by the technician.

Replacement of 12V / 24V, 3-5Amps SMPS unit (as per the systems voltage requirement to step down the available 220V AC supply) for providing power supply to system with battery charger and with battery complete as required. (Make: M/S Protek/ ANG or Similar Superior Make).

Attending the complaint of existing Fire alarm system Installed at 3rd & 7th floor on call basis and visiting the location, checking the system, diagnosed the fault occurred and rectifying the minor defects by the technician.

Replacement of following faulty unrepairable equipment with the new equipment of the existing fire detection & alarm system & VESDA system including removing the faulty equipment, installing the new equipment after configuring as required at site by the trained technician.

Smoke detector

Hooter

Manual call box

12 Volt, 07AH Sealed Maintenance Free Batteries

Replacement of VESDA filter

Repair of VESDA SMPS

Replacement of 2x1.5 mm armoured FRLS cable

Removing the empty of following capacity ABC type Fire extinguishers from the site and taking it to the refilling plant and Refilling the same with Mono Amonium phosphate powder and required gas include checking the nozzle, valve testing & refixing the same at site complete as required.

4/5 KG ABC type

Removing the empty following capacity Foam type Fire extinguishers from the site and taking it to the refilling plant and Refilling the same with foam concentrate and required GAS include checking the nozzle, valve & hydraulic testing & refixing the same complete as required.

50 Ltr. capacity Foam type

Removing the empty following capacity water CO2 type Fire extinguishers from the site and taking it to the refilling plant and Refilling the same with required CO2 GAS include checking the nozzle, valve testing & refixing the same complete as required.

50 Ltr. capacity CO2 type

Removing the empty following capacity CO2 type Fire extinguishers from the site and taking it to the refilling plant and Refilling the same with required CO2 GAS include checking the nozzle, valve and hydraulic testing & refixing the same complete as required.

2/3 Kg capacity CO2 type

4.5 Kg capacity CO2 type

6 Kg capacity CO2 type

9 Kg capacity CO2 type

Replacement of the following faulty component of the Fire extinguishers with new component / accessories complete as required.

Discharge Hose pipe with horn for CO2 type Fire extinguishers.

Discharge Hose pipe for ABC/DCP type Fire extinguishers.

Valve for CO2 type Fire extinguishers.

Valve for ABC/ DCP/ Foam type Fire extinguishers.

Pressure Gauge for ABC/DCP type fire extinguishers.

Repainting the rusted fire extinguishers with two coats PO red colour complete as required.

Supply & fixing the stickers on painted Fire extinguishers of required type giving details of type of fire extinguishers and the method to use the Fire extinguishers complete as required.

Provision of monthly testing of fire detection system and VESDA system at HF switch room 3rd floor and NIB 7th floor in presence of concern site incharge/representative i/c making report etc. complete as reqd.

Providing and fixing of 4Kg capacity portable power type fire extinguisher ISI mark complete with discharge pipe and nozzle etc. complete as reqd.)(M/S Lifeguard, Fire matrix , Stop fire or SS)

Replacement of following faulty component installed in the CCTV system at different locations.

12V 5 A SMPS suitable for giving power to 4 No. CTV camera

Replacement of fixed lens module in existing faulty camera compatible with existing fixed lens CCTV camera

Replacement of faulty hard disk with new 2 TB surveillance Hard disk to system complete as required. (make WD/ Seagate)

Replacement of faulty POE switch new 4 port POE switch complete with connection through RJ45 connectors as required

Replacement of faulty CAT6 cabling with new CAT6 4 pair cable in existing conduit / on surface/ cable tray as required

Replacement of faulty irreparable fixed lens camera with new camera of same specifications and compatible with existing system ( 2mp IP based fixed lens camera, true day and night camera (IR distance 15-20 Metre) ,low illumination 0.15LUX, Excellent Noise Reduction, compact Design with POE, BLC)

Repairing of faulty following NVR , Job include the checking the NVR and taking it to service centre for necessary repair and reinstallation of the same after repair

4 Channel NVR

16 channel NVR

Provision of semiskilled Labour for attending audio visual system and helping day to day office work and helping in data entry under ESD- Kidwai Bhawan , Janpath, New Delhi. Shift: 9.30 AM to 06.00 PM

Less Credit against dismantled material obtained from all above items, which will be the property of the Contractor (-)

Note:- 1. The GST / other Input Tax Credit (ITC) taxes shall be quoted by the firm as applicable as per latest amendments of GST Rules. 2. The contractor shall provide correct tariff heads & other details to enable BSNL claim Input Tax Credit. 3. Servicing Scrap items will be credited to the firm. The rate may be quoted accordingly. 4. Bidder must mandatorily quote for all GST components (CGST, SGST, and IGST) as required. 5. If annual maintenance contract charges are required to be quoted as per SOW, basic charges should be shown in column 4 & the Goods and Service Tax (GST) in column 7 to 12. 6. The bidder who submits the offer with concessional Goods and Service Tax (GST) shall submit the proof of applicable concessional GST. In case the Concessional GST is not creditable to BSNL it should be included in the price of the goods/services. 7. In case, dealer is registered under compounding scheme or any rule/notification where the BSNL is not eligible for input tax credit then the bidder should not disclose any amount in column 7 to12 & 14. 8. % age Rate of FF & Packing should be shown of basic unit price excluding all taxes & charges (i.e. as %age of col.4). 9. The FF & packing amount quoted shall not be subject to change after bid evaluation /ordering on account of change of copper, lead base price, change in duties & taxes of item etc. 10. Bidder must mandatorily mention HSN & SAC numbers.15. Evaluation of bids: - The evaluation and comparison of responsive bids shall be done on the basis of Net cost to BSNL on the prices of the goods & Services (i.e. complete work) offered along with all applicable Taxes, packing Forwarding Freight & Insurance charges etc. exclusive of GST. Declaration by Bidder: 1. We hereby declare that in quoting the above prices, we have taken into account the entire credit on inputs available under the GST Act introduced w.e.f. 1 July 2017 and further extended on more items till date. 2. We hereby certify that HSN/SAC shown in column 17 are correct & credit of GST for the amount shown in column 14 above are admissible as per GST Laws. Name of bidder: Seal of Company: