8494 DAY TO DAY MAINT INCLUDING PLUMBING, CARPENTING WORKS, MASONARY WORKS AT FMU FLEET OFFICE VAJRABAHU LWT CG COMPLEX DGNP BLDG ETC UNDER AGE BR I NW KUNJALI UNDER GE NW KUNJALI

Amount

Resecuring and refixing in same opening without taking down of chowkats or frames with shutter (Without taking off from frame) but n.exc 1.5 sqm complete all as specified and as directed by EIC.

Resecuring and refixing in same opening without chowkats or frames with shutter exc 1.5sqm but n.exc 4 sqm each but (without taking off shutter from the frame) complete all as specified and as directed by EIC.

Taking down cement plaster of any description hacking for key, racking out joints and scrubbing down with water etc to receive plaster and removing debris outside MD land incl necessary scafolding complete all as specified and as directed

M&L Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed .

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed .

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and as directed

Taking down chowkats or frames with shutter (Without taking off from frame) but n.exc 1.5 sqm complete all as specified and as directed

Taking down chowkats or frames with shutter exc 1.5sqm but n.exc 4 sqm each but (without taking off shutter from the frame) complete all as specified and as directed by EIC.

Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete all as specified and directed.

ditto as ser No- but exc 2 Sqm each complete all as specified and directed by EIC.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by EIC.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., of grade Fe 410 -W(Gde-E- 250) quality- A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. All as specified and diected.

M&L Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

M&L in repairs for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hook and including scaffolding upto any height. complete all as specified and directed by EIC.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment.

M&L for Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed.

M&L for preparing New or previously untreated surface of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide. All as specified and directed.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F in repirs 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and as directed.

S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.

S&F 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F 110 mm dia PVC ( SWR) grade double T/Y with access doors including fixing clips

All as per item No27 above but 75mm dia

M&L Plain, black, mild steel sheeting, 1 mm thick in ridges, hips, valley gutters,drip and straight flashings (length and girth as fixed).

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4.

S&F in repairs Second class hard-wood in scantlings clean sawn. All as specified and directed.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated.

S&F 40 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M&L for preparation of newly plastered surfaces on ceiling surfaces and applying two coats of oil emulsion distemper over a coat of primer on ceiling surfaces incl preparation of surfaces complete all as specified and as directed

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds upto ixth floor complete all as specified and as directed

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old painted wooden of any description over 10cm width or girth and applying one coat of synthetic enamel paint incl necessary scafolding complete all as specified and as directed

Dismantling of Wall panelling, partition and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including Aluminium grid frame work. Complete all as specified and directed.

M&L for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending holts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as spoecified and as directed.

M&L for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rabbish of the premises.

M&L for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.

M&L for preparation and applying two coat of floor/Roof paint (Make-Indigo Floor paint). All as specified and directed.

S & F Powder coated aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be given by GE).

S&F concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed.

Demolition of Unreinforced cement concrete of any description and in any position not other wise specifically provided for all as specifed and directed.

Cement concrete 25 mm thickType B1 1:2:4 (20 mm graded aggregate)

M & L for cement concrete type B1 1:2:4 (20 mm graded aggregates), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. All as specified and directed.

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store.

All as per item No 61above but 20 mm bore GI Pipe.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

As per item No 64 above but 20mm dia medium GI Pipe

S & F 100 mm stainless steel Butt hinges.

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm.

S&F Extrude aluminium anodised alloy handles, fabricated type 150mm size.

M & L for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor.

M&L stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

M&L Cast Iron Nahani trap 75mm, plain with grating including setting and jointing with silvent cement to waste pipe fixed in cement concrete type B1 (1:2:4). All as specified and directed.

Dismantling of Stone slabs laid, bedded and pointing in any mortar and tiles of any description or thickness in floors, aprons etc.

M & L for hard wear stone (of any type) granite stone slab 20 mm thick in flooring machine cut, in plateformbedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15 mm thick screed bed in CM 1:4 complete all as specified.

S & F in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed by Engr-in-Charge.

S&F in repair 12 mm thick Prelaminated medium density fibre board both side decorative lamination interior grade, fixed in aluminium/wooden frame work complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified Fixed in repairs.

S & F Vitreous china urinal partition white of size 310x700 mm slabs, terminating about 40 cm above floor line, fixed in repairs complete all as specified and directed.

S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

S&F Bathroom Cabinet Mirror 500x400 mm screwing in all conrner with chromium plated brass screws and cup washers all as specified and directed. (Make Prayag : Cat Part No 556).

S&F Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm dia iron pipe or for brass ferrule and fixed in repairs as specified.

S&F in repairs 140mm dia overhead shower round shape single flow with air effect (ABS body & Face plate chrome plated) with rubit cleaning system.

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and as directed

S&F in repairs fancy type angle Stop Cock valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle complete all as specified and as directed

Removing building material exc. 1.50 km but n exc. 25 km and depositing where directed

S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as directed.

S&F in repairs 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. Complete.

S & F white glazed earthen ware vitreous Oval type china wash hand basin of size 600x700 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete

S&F in repairs vitreous china wash down water closet pan coloured (pedestal pattern) including plastic sheet cover with nuts and bolts etc all as specified and directed.

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of bras, other parts made of mild steel heavy duty and fixed all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .

HINDUSTAN BUILDERS

SR Construction

Sachin santosh dalvi

Genius Construction Co.

H R Enterprises

Pragathi Infrastructure Co.

jalandhara construction