Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹39.2 L+₹2.6 L (6.99%)Rejected-AOC | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 3 | L3₹39.8 L+₹3.2 L (8.70%)Rejected-AOC | L3 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 4 | L4₹40.3 L+₹3.7 L (10.1%)Rejected-AOC C O SECTOR 02 HOUSING COLONY CHANNI HIMMAT JAMMU J K PIN 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L4 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
29 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
PROVN OF 03 BATHROOMS, GUARD ROOMS WITH TOILET, SPL REPAIR TO BLDG NO T-68 AND T-139 IN AREAS OF AGE B/R REASI UNDER GE NAGROTA
2022_MES_561140_1
GEN-74/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NAGROTA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹80,000
Yes
24 Feb 2023
3 Nov 2022
1 Dec 2022
3 Nov 2022
29 Nov 2022
16 Nov 2022
Amount
Demolition of brickwork or stone/ boulder masonry, built in lime/cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified and directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete, all as specified and directed.
Demolition of cement concrete of any discription and in any position not otherwise specifically provided, complete, all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete, all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete, all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete, all as specified and directed.
Dismantling of structural steel including doors, gates but excluding framed truss etc. complete, all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete, all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete, all as specified and directed.
Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete, all as specified and directed.
Dismantling water tank of capacity exceeding 500 liters but not exceeding 1000 ltrs and removing to stores, complete, all as specified and directed.
B/R works including internal water supply Surface dressing n. exc 15 cm deep in any type of soil, complete all as specified and directed.
Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil for foundation, etc, or for shafts, wells, drain pipes or laying of cable or pipes, trimming the sides, forming bottom surfaces to required leve, n.exc 10sqm on plan and getting out, complete, all as specified and directed.
M&L Hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete, all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete, all as specified and directed.
Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point, complete, all as specified and directed.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum in any type of soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface, complete, all as specified and directed.
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete, all as specified and directed.
M&L Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete , complete, all as specified and directed.
M&L Brick work with sub class 'B' bricks (using old size bricks) straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete, all as specified and directed.
M&L Reinforced cement concrete M-25 (Design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc ; basement slabs, under- reamed piles and mass concrete, complete, all as specified and directed.
M&L Reinforced cement concrete M-25 (Design mix) as in beams, cantilevers, bressummers, lintels over 1.5 m span, complete, all as specified and directed.
Use and waste of form work to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter, flat rough finished surface of concrete, complete, all as specified and directed.
Use and waste of form work to sides and soffits of floors or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhanges etc also splays between floors and beams etc. rough finished concrete surface of concrete, complete, all as specified and directed.
M&L TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and directed.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia, complete, all as specified and directed.
M&L 15 mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete, all as specified and directed. Note: WPC will be measured and paid seperately.
Supply only integral water proofing compound conforming to latest IS specifications.
M&L 10 mm thick rendering on other than fair faces of brick/stone masonry surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete, all as specified and directed.
M&L Preaparing newly plastered or unplastered surfaces of wall and applying three coats of white wash, complete, all as specified and directed.
M&L 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in floor/sub-base and finished even and fair, complete, all as specified and directed.
M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair, complete, all as specified and directed.
M&L Non-skid jointless coloured ceramic tiles (square or rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L Glazed ceramic tiles (designer pattern, Highlighter tiles) in vertical surfaces 350x250x7mm/450x350x7mm/450x350x7mm thick set set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl 10 MM thick redering in CM 1:4, complete, all as specified and directed.
M&L Rolled mild steel as in roof trusses ( framed) trussed, purlins, crane gantries, rail,and fastening and heavy brackets framing ( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E250) quality-A, complete, all as specified and directed.
M&L Preparation of new steel and iron surfaces not otherwise described exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome primer, complete, all as specified and directed.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete, all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification in SSR-II, complete, all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Clause No. 8.B.1 to 8.B.10 and drawing of MES SSR-2020 Part-II, complete, all as specified and directed.
S&F mild steel cold rolled butt hinges medium weight 100 mm long, complete, all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete, all as specified and directed.
S&F Aluminium alloy, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete, all as specified and directed.
S&F Aluminium handles cast type, anodised, 150 mm size, complete, all as specified and directed.
M&L providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete, all as specified and directed.
S&F steel windows / ventilator with tubular frame factory made with double shutter (wire gauged shutter and glass / glazed shutter, (wire cloth and glass panes shall be ameasured and paid separately) of size 79 mmx 39 mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12 x 3 mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100 mm long and 10 mm square bar grills complete, twlo coats of synthetic enamel paint over one coat of red oxide primer, all as specified and as shown on drawing. CEUZ/TD/1269/2008 HT 1/1 to 1/3 Note: Wire cloth and glass panes will measured and paid speperately.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.0mm and fixed with tinned tacks, or galvanised wire staples, complete, all as specified and directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares in any size pane, complete, all as specified and directed.
S&F 15mm bore galvanized steel tubes, medium grade, fixed to walls and ceiling or laid in floors, complete, all as specified and directed.
S&F 20mm bore galvanized steel tubes, medium grade, fixed to walls and ceiling or laid in floors, complete, all as specified and directed.
S&F 25mm bore galvanized steel tubes, medium grade, fixed to walls and ceiling or laid in floors, complete, all as specified and directed.
S&F bib taps 15mm, fancy type cast copper alloy cromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed, complete, all as specified and directed. Make : Essco Marvel series or equivalent in Jaquar or as approved by Engr-In-Charge.
S&F pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without lettered, 'hot' or 'cold', with long screwed shank and fly nuts, screwed for iron pipe and fixed complete, all as specified and directed. Make : Essco Marvel series or equivalent in Jaquar or as approved by Engr-In-Charge.
S&F CI floor trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1, complete, all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius, complete, all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete, all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor, complete, all as specified and directed.
S&F 110 mm bore PVC (SWR) junction single (single T) equal or unequal with access door, complete, all as specified and directed.
S&F vitreous China wash basin, white, flat back, size 210x580x460mm with long padestal, including brackets, 32mm waste fittings brass chromium plated for glazed ware sinks, basins etc with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed 32mm dia stainless steel waste coupling of including cutting for and pinning ends of brackets or erecting stand, complete, all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm fixed in repair, complete, all as specified and directed.
S&F grating doom 100mm dia square or round of PTMT (minimum weight 25 gm), complete, all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters, complete, all as specified and directed.
S&F ball brass valves 20mm bore, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete, all as specified and directed.
S&F soap dish vitreous China white approximate size 160x160x90mm and fixed with chromium plated brass screws, complete, all as specified and directed.
S&F Angle stop valve 15mm of PTMTany colour high pressure secewed for iron pipeand fixed (minimum weight 90 grams), complete, all as specified and directed.
S&F anodised aluminium snap grid frame work for false ceiling (Size of grid 605x605mm), complete, all as specified and directed.
S&F 7mm thick designer mineral fibre board ceiling fixed or laid/ inserted in snap grid ceiling , complete, all as specified and directed. Make: Armstrong (beauty sky in white) or equivalent, make and design as approved by Engineer-In-Charge.
M&L PCC 1:2:4 type B-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete , complete, all as specified and directed.
M&L 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in floor and hard standing finished even and fair, complete, all as specified and directed.
M&L Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; ailings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete, all as specified and directed.
S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms), complete, all as specified and directed.
S&F overhead Shower rose 125mm or more, cromium plated fancy type, single flow with swivel joints with stainless steel rod fixing to steel pipe or union, supply, complete all as specified and directed.
Use and waste of form work to sides of pillars, posts sturts, piers, columns and stanchions, rough finished concrete surface of concrete, complete, all as specified and directed.
M&L Reinforced cement concrete M-25 (Design Mix) as as in columns, pillars, piers, posts and struts, complete, all as specified and directed.
M&L Reinforced cement concrete M-25 as in chajjas, complete, all as specified and directed.
Preparation of newly plastered surfaces of wall and applying two coats of Oil bound distemper over a coat of primer, complete, all as specified and directed.
Preparation of newly plastered external surfaces of wall and applying two coats of cement base paint over a coat of chalk whitening, complete, all as specified and directed.
S&F in repairs stainless steel fancy type drapery rods 19/20 mm bore for curtain rails with fixing stainless steel brackes, fancy stainless steel stops and curtain rings (06 Nos per mtr)complete, all as specified and directed.
M&L Vitrified coloured ceramic double charged/ultra charged tiles 10 mm thick, area of each tile exc 0.36 sqm but not exc 0.42 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thick screed bed in CM 1:4, complete, all as specified and directed.
M&L Non-skid coloured ceramic (square or rectengular) 7 to 8 mm thick, area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 10mm thick screed bed in CM 1:6, complete all as specified and directed
S&F factory made pressed steel door frames 1.25mm thick PBI sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 x 60 mm, including tarring with ends and back of chowkhats and lugs including back fillingof PCC 1:3:6 for chowkhats & PCC 1:2:4 for block for hold fast and also painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete, all as specified and directed.
S&F 35 mm thick factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete, all as specified and directed.
S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and itred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete, all as specified and directed.
Preparation of new wood or wood based surfaces of any discription not otherwise described exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete, all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete, all as specified and directed.
S&F Toilet paper holder, vitreous China, white, box type, complete, all as specified and directed.
S&F Hand Shower (health faucet) with 1mtr long easy flex tube in crome finish and wall hook with NRV (Back flow preventer), complete, all as specified and directed. Make :- Jaquar Cat Part No ALD-CHR-583 or equivalent as approved.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including a provision of concrete bedding, complete, all as specified and directed.
S&F Vitreous china urinal, white including flushing cistern, flush pipeand waste pipe, complete, all as specified and directed. Make : Parryware New Maganum Cat Part No C 0575 including Spreader Cat Part No C 8095 and with all accesoriesand bracket with fixing arrangement.
S&F 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete, all as specified and directed.
S&F 3mm thick sheet glass, pin head type and glazing with oil putty in squares in any size pane, complete, all as specified and directed.
S&F floor door stopper of alluminum alloy body and tongue, anodised, with hard drawn steel spring, of overall length 140mm fixed in floor, complete, all as specified and directed.
M&L Preparation of old treated steel and iron surfaces not otherwise described exceeding 10 cm width or girth and applying two coats of synthetic enamel paint , complete, all as specified and directed.
M&L Non-skid coloured ceramic (square or rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 10mm thick screed bed in CM 1:6, complete all as specified and directed
M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified and directed.
Internal Water Supply S&F stop valve 15 mm bore, CP cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.
S&F grating doom 125mm dia square or round of PTMT (minimum weight 40 gm), complete, all as specified and directed.
Preparation of newly plastered wall surfaces with chalk whiting and applying two coats of oil emulsion distemper over a coat of 1mm birla white putty, complete, all as specified and directed.
S&F Factory made solid PVC moulded door shutter (particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete, all as specified and directed.
S&Fvitreous china pedestral pattern type white wash down water closter pan with Antimicrobial Solid Seat Cover Code No. C8094 but excluding flushing cistern and flush pipe, complete, all as specified and directed. Make Parryware "Niagara' Code NO. C0252 or equivalent as approved
S&F tubular towel rail and fixed with chromium plated brass screws, complete, all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete, all as specified and directed.
S&F vitreous China wash hand basin, white, flat back, size 550x400mm excluding tap, waste pipe of 32mm dia and waste fittings, Pillar tap brass, chromium with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.
M&L for brick work built in CM 1:4 with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, complete all as specified and directed.
Road Path & Culvert M&L for Machine pressed precast conctete prelaminated rubberised coloured interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade set jointed and laid with grey cement and pigment, complete, all as specified and directed.
Supply only sand for filling under floors or in foundation or for laying floor finishes, complete, all as specified and directed.
M&L PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in coping, Kerb etc and the like including weathering, slightly rounded or chamfered angles and throating including necessary form works, complete, all as specified and directed.
Sewage Disposal M&L concrete bed to drain pipes of bore 150mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports, complete, all as specified and directed. Note:- (i) Thickness of bed below barrel of pipe -10 cm. (ii) Width of bed :- 15 cm beyond either side of the pipe.
M&L salt glazed stone ware drain pipes of internal diameter 150 mm grade 'A' laid in trenches and jointed, complete, all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. all as specified.
M&L Cutting into existing manholes for connecting new drains, making good to pipe 150mm dia and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B-1, smooth finished and reforming benching as required, complete, all as specified and directed.
M&L Cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in surface channels and drains, complete, all as specified and directed.
M&L Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate) but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6, complete, all as specified and directed.
M&L for Soakage wells of size 1.2 M dia X 3.0 M (effective depth) complete including excavation in any type of soil, foundation in PCC 1:3:6 ype C-1 using 20 mm crused stone aggregates, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4 and RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats, complete all as shown in Drawing: CE/TD-1202 Sh ½ and 2/2.
M&L for construction of Septic tank 10 user complete including exavation In any type of soil, foundation in PCC 1:2:4 type B-1 using 20 mm crused stone aggregates, brick work in cement mortar 1:4, RCC M-25 slab covers incl RCC M-25 pre-cast manhole cover having 6mm MS plate all around, reinforced cover with angle iron frame, vent shaft and sludge chamber etc. complete all as shown in Drawing: CE/TD-1202 Sh ½ and 2/2.
Internal Electrification Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets brackets, switch boards etc and making good disturbed surfaces of walls, floors etc, complete, all as specified and directed.
M&L for point wiring (concealed) for one light / fan point/exhaust point controlled by one single pole, one way switch, 6 amps with 1.5 sqmm, PVC insulated, sheathed, 1100 volt grade, multi stranded copper conductor FRLS cable (red for phase and black for neutral), IS-694 marked, drawn through and including non metallic medium grade rigid PVC conduit ISI marked 19/20 mm dia complete with all PVC accessories / fittings ISI marked and sunk type pressed steel terminal switch boxes 1.5 mm thick duly painted with black bituminous paint over one coat of red oxide primer with plastic laminated sheet top cover 3mm thick make hylam, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continuous earth conductor to common earth and connected to earth dolly with all accessories, complete, all as specified and directed.
All as per item No above but one 5 pin socket outlet 15 Amp on independent board with cables 4 Sqmm size for live and neutral with 2.5 sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing, complete, all as specified and directed.
S&F LED Fluorescent tube light fitting, 1 x 20 W, LED integrated Batten 15 indoor decorative aluminium extruded T5 LED Battens - integrated type white complete with all accessories with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.
S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including 10watt LED lam, in white colourwith maximum lumen output (LM) 850, 10 Watt, Base Cap - B22, Complete all as specified.
S & F 1 X 10 W LED bulk head luminaries, IP65 LED Bulk Head in engineering plastic housing with clear prismatic diffuser with lamp holders, etc. including 10 watt LED lamp complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50 HZ.
S&F switch piano type 5 A flush button single pole one way, complete, all as specified and directed.
S&F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body, complete, all as specified and directed.
S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal, complete, all as specified and directed.
S&F for Isolator single pole and neutral 40 amps, 240 V, complete, all as specified and directed.
S&F for MCB single pole 5 to 40 amps, 240 V, complete, all as specified and directed.
S & F sheet metal enclosure for DBs single door when MCBs to be used Single pole and neutral 08 way with 200 Amps rated bus bar 240 Volts, complete, all as specified and directed.
S&F electric water heater storage type steel body with copper inner tank and heating lement upto 2 KW capacity 25 ltr, BEE 5 star rated complete with all accessaries such as safety valve, thermostate, NRV Connection piece etc, complete, all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground, (earth pit not less than 1.5m below normal ground level), with top edge of plate not less than 1.5M below normal ground level, connected to and including galvanised earth wire 4mm dia by means of nut, bolt, check nuts and washers of galvanised iron or steel as shown on electrical plate No. 03 of SSR Part-I (2020). complete all as specified and directed including testing on completion including following:- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Precast RCC cover in cement concrete 1:2:4 type B-1with suitable handle, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (c) Funnel with watering pipe of GI 20mm nominal bore light grade and lugs etc . (d) 15mm nolinal bore medium grade GI protection pipe 5M long for protection of earthing lead. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing on completion as directed.
All as per item No above but one 3/5 pin socket outlet 5 Amp on independent board with cables 1.5 Sqmm size for live and neutral with 1.5 sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing, complete, all as specified and directed.
All as per item No above but one 3/5 pin socket outlet 5 Amp on same board with cables 1.5 Sqmm size for live and neutral with 1.5 sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing, complete, all as specified and directed.
S&F Switch socket combination 2 in 1, 3 pin, 5 amp flush type universal, complete, all as specified and directed.
S&F Ceiling fan 1200mm sweep, 230 V 50 Hz complete with three blade, down road with all accessories with squirrel cage induction motor, complete, all as specified and directed.
S&F Stepped type electronic fan regulator delux type 1200/1400mm sweep flush type on the existing board, complete, all as specified and directed.
S&F Exhaust fan 300mm sweep, 230 V AC Single phase, 1400 rpm steel body with blades, frames and louvers, complete, all as specified and directed.
S&F for MCB single pole and neutral 05 to 40 amps, 10 KA 240 V, complete, all as specified and directed.
Taking down the existing ceiling fan and re-fixing/rehanging the same in exixting positionincluding provn of suitable length and size of cable from ceiling rose to ceiling fan, complete, all as specified and directed.
S&F in repair Stepped type electronic fan regulator 1200/1400mm sweep flush type on the existing board including taking down the old and unserviceable, complete, all as specified and directed.
Supplying, laying or fixing or passing through pipe, testing and commissioning 1100 volts grade ISI marked XLPE insulated armoured stranded aluminium conductor cable of size 16 sqmm 4 core, complete, all as specified and directed.
M&L for sub main wiring with 2 runs of 6 sqmm FRLS PVC insulated, multi stranded, copper cabl, 1100 v grade along with one run of 4.0 Sqmm copper cable for earth continuity wire connected to common earth dolly (Colour code to be followed) drawn through concealed conduit 20mm dia medium grade PVC conduit including all accesories, complete, all as specified and directed.
S&F LED fluorescent tube light fitting, 1x 20 w LED integrated battenT-05 indoor decorative aluminium extruded LED batten white, complete with all acessories with twin core twisted copper cable, all as specified and directed.
S&F socket outlet 2 in 1, 5 pin, 5 amp flush type universal, complete, all as specified and directed.
S&F socket outlet 2 in 1, 5 pin, 5 and 15 amp flush type universal, complete, all as specified and directed.
S&F switch piano type 15 A flush button single pole one way, complete, all as specified and directed.
Supplying, laying or fixing or passing through pipe, testing and commissioning 1100 volts grade ISI marked XLPE insulated armoured stranded aluminium conductor cable of size 25 sqmm 4 core, complete, all as specified and directed.
S&F MCB TPN 63 A 10KA including connection with suitable size aluminium/copper lugs, complete, all as specified and directed.
M&L for servicing of ceiling fans of sweep 1200/1400mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed.
M&L rewinding of ceiling fan motor of size 1200mm/1400mm with super enamelled copper winding wire not less than the existing gauge affter cutting and removing the burnt existing winding including varnishing heating by providing fresh insulating materials, complete all as specified and directed.
External Electric Supply M&L for dry sand cushioning to under ground cable 8cm thick before laying the cable and 15cm thick after laying the streching the cable in trenches, including hand punning and consolidating complete all as specified. Note : for payment purpose punned thickness shall be measured.
M&L for sub class ‘B brick, old size, as cable protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete, all as specified and directed.
Supplying, laying or fixing or passing through pipe, testing and commissioning 1100 volts grade ISI marked XLPE insulated armoured stranded aluminium conductor cable of size 10 sqmm 2 core, complete, all as specified and directed.
M&L for GI tubing 25mm bore (light grade) with all fittings, laid in trenches or under road/drain crossing or fixing to poles as protection pipe, or fixed alongwith walls/poles with clamps, complete, all as specified and directed.
Supplying, laying or fixing or passing through pipe, testing and commissioning 1100 volts grade ISI marked XLPE insulated armoured stranded aluminium conductor cable of size 16 sqmm 2 core, complete, all as specified and directed.
S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete, all as specified and directed.
S&F Bracket fro street light fitting made out tubing 40 mm med grade 2' x 1-1/2' 135 degree bend with cutting, welding and two MS bracket with nut bolts and washer bracing to pole/on fencinjg for street light fitting complete all as specified.
M&L for GI tubing 40mm bore (heavy grade) with all fittings, laid in trenches or under road/drain crossing or fixing to poles as protection pipe, or fixed alongwith walls/poles with clamps, complete, all as specified and directed.
Design, Supply, installation, testing and commissioning of bus bar chember box of size 0.5M x 0.8M x 0.60M depth,(HxBxD) outdoor type alongwith one incoming MCCB 100 A 4 Pole 25 KA factor fabricated made out of CRCA sheet of 3.15 mm thick, fully enclosed and angle iron frame of size 40 x 40 x 6mm thick and T section with front and rear openable duble door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of bus bars of aluminium of suitable size of 100 Amps duly insulated and mounted on Epoxy/porcelain insulators in totally enclosed chamber with three phase and neutral 415 volts, AC, system. provn of suitable cable glands, duly powder coated, complete all as specified and directed.
Excavation in trenches in any type of soil not exc. 1.5 m wide and not exc. 1.5 in depth for laying of cabel or pipes (where provided for protection of cable) etc. and getting out trimming the sides, forming bottom surfaces to require level complete all as specified and directed
Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed
Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed
M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.
S & L brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' bricks laid in trenches flat complete all as specified and directed.
Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strips or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 50 sqmm 3.5 core, complete all as specified and directed.
Supply and installation of silent Diesel Engine driven generating set 30 KVA 415 volts, 3 phase 4 wire, engine as per IS:10001/10002 and Alternator as per IS: 13364 complete with foundation (as per OEM design), control panel with necessary meter and sound proof canopy as per CPCB norms of capacity upto 30 KVA (a) Alternator Assembly :- Alternator assembly 30 KVA capacity AC 400 /433/440 Volts , 3 phase ,4 wire ,0.8 PF ,50 C/s 1500 RPM ,Self excited self regulated ,screen protected ,drip proof type with end shield ball /roller bearing with damper winding in each poles/ phases as per IS 4722 and base 5000/IS 4722 all as specified. (b) Diesel Engine :- Diesel engine (prime over) shall be air cooled of adequate BHP after derating and induction of power consumed and drive above alternator independently directly through flexible coupling , vertical , multi-cylinder,diesel injection ,cold starting ,1500 RPM , with standard accessories such as start /stop push button switches ,Self starter alongwith self starting system, battery charging system with required batteries 12 volts 180AH (Maintenance Free )-01 No and battery lead duly initially charged ,oil temperature gauges ,RPM meter ,hour meter ,water temp gauge ,oil pressure gauge ,mounted on common base frame and coupled through suitable coupling to the alternator complete with silencer assembly with exhaust pipe duly wrapped with asbestos rope of suitable size upto 1M outside the generator set room and MS fuel tank for 12 hours continuous running fuel capacity ,built -in the acostic enclosure with anti vibration pads. C)Battery Charger:-Battery charger having electrical circuit consisting of triods ,rectifiers ,capacitor and resistance etc . The battery charger should be able to charge the battery at all the time when ever electric supply given to battery through control panel or electric power point. d)Fuel Tank:-Fuel Tank of suitable capacity as per manufactures instruction of DG Set with supporting fabricated steel strand with all pipes armoured flexible pipe ) connecting up to fuel pump incl oil Lever indicator gauge , drain and air vent plug etc.
Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps.
External Water Supply S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor/trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm, complete, all as specified and directed.
S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor/trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 25 mm, complete, all as specified and directed.
S&F stop valve 25 mm bore, CP cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.
S&F stop valve 20 mm bore, CP cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.
M&L Cutting and Screwing existing 50mm or 20 to 80 mm dia steel tubing for alterations or additions (or lengthening screw on pipe to form connector) (each cut measured) and done in position without taking down, complete, all as specified and directed.
m/s vaid contractor and builders
Mohd Rafiq and Co
MAMTA ENTERPRISES
Bidder Name
m/s vaid contractor and builders
MAMTA ENTERPRISES
Mohd Rafiq and Co
R C TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .