SPECIAL REPAIR TO REPLACEMENT OF LT OH CONDUCTOR TO UG CABLE WITH ALL ACCESSORIES AT DHAR ROAD UNDER GE A DHAR ROAD UDHAMPUR JOB NO Z SRE-11 2024-25

Amount

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

All as per item No 1 above but depth exceeding 1.5 meter and not exceeding 3 meter complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and directed .

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 40 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

All as per item No 09 above but of size 50 mm bore complete all as specified and directed by the Engineer-in-Charge.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed by the Engineer-in-Charge.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq mm 3.5 Core with required aluminium cable lugs complete all as specified and directed by the Engineer-in-Charge.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq mm 3.5 Core with required aluminium cable lugs complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing , installation, testing and commissioning as in repair busbar chamber, outdoor type, double door,KIOSK type of size (0.75x0.0.6x0.25) Mtrs, factory made, front & back openable, properly welded MS angular supported with Stand made out of size 50x50x6 mm , having 4 Nos legs of 2.5 feet height with CRCA steel sheet Minimum of 3 mm thick, having provision of arrangement/Holes for incoming/ out going cables duly painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer of any tint, CPRI Approved with locking arrangements with & including 4 Nos Aluminium busbar of rating 350 Amp on base insulators with MCCB 250 amp 36 kA, 4 Pole with with adjustable thermal setting for incoming with & including necessary platform and grouting of panel as per manufecturer's instructions after demolition of chamber as existing at site complete all as specified and as directed by Engr-in-Charge.

Supply & fixing , installation, testing and commissioning as in repair busbar chamber, outdoor type, double door,KIOSK type of size (0.6x0.0.6x0.25) Mtrs, factory made, front & back openable, properly welded MS angular supported with Stand made out of 50x50x6 mm thick angle iron having 4 Nos legs of 3 feet height with CRCA steel sheet Minimum of 3 mm thick,duly painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer of any tint, CPRI Approved with locking arrangements with & including 4 Nos Aluminium busbar of rating 300 Amp on base insulators with MCCB 160 amp 36 kA, 4 Pole with with adjustable thermal setting for incoming with & including necessary platform and grouting of panel as per manufecturer's instructions after demolition of chamber as existing at site complete all as complete all as specified and directed by the Engineer-in-Charge.

supply & fixing , installation, testing and commissioning as in repair busbar chamber, outdoor type, double door,KIOSK type of size (0.6x0.0.6x0.25) Mtrs, factory made, front & back openable, properly welded MS angular supported with Stand made out of 50x50x6 mm thick angle iron having 4 Nos legs of 3 feet height with CRCA steel sheet Minimum of 3 mm thick,duly painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer of any tint, CPRI Approved with locking arrangements with & including 4 Nos Aluminium busbar of rating 200 Amp on base insulators with MCCB 100 amp 36 kA, 4 Pole with with adjustable thermal setting for incoming with & including necessary platform and grouting of panel as per manufecturer's instructions after demolition of chamber as existing at site complete all as specified and directed by the Engineer-in-Charge.

supply & fixing supply , installation, testing and commissioning as in repair busbar chamber, outdoor type, double door,KIOSK type of size (0.6x0.60 x 0.25) Mtrs, factory made, front & back openable, properly welded MS angular supported with Stand made out of 50x50x6 mm thick angle iron having 4 Nos legs of 3 feet height with CRCA steel sheet Minimum of 3 mm thick, duly painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer of any tint, CPRI Approved with locking arrangements with & including 4 Nos Aluminium busbar of rating 250 Amp on base insulators including necessary platform and grouting of panel as per manufecturer's instructions after demolition of chamber as existing at site complete all as specified and as directed.

Supply & fixing, installation, testing and commissioning as in repair busbar chamber, outdoor type, double door,KIOSK type of size (0.60x0.40 x 0.20) Mtrs, factory made, front & back openable, properly welded MS angular supported with Stand made out of (45x45x6) mm thick angle iron having 4 Nos legs of 2.5 feet height with CRCA steel sheet, minimum of 2mm thick , duly painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer of any tint, CPRI Approved with locking arrangements with & including 4 Nos Aluminium busbar of rating 200 Amp on base insulators including necessary platform and grouting of panel as per manufecturer's instructions after demolition of chamber as existing at sitecomplete all as specified and directed by the Engineer-in-Charge.

Supply and fix as in repair of Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sqmm complete all as specified and directed by the Engineer-in-Charge.

S&F Cable jointing kit for 11 KV (Earthed) grade cable for heat shrink type end joint in door type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sqmm complete all as specified and directed by the Engineer-in-Charge.

S&F Cable jointing kit for 11 KV (Earthed) grade cable for heat shrink type end joint out door type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed by the Engineer-in-Charge.

S&F Cable jointing kit for 11 KV (Earthed) grade cable for heat shrink type end joint out door type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm complete all as specified and directed by the Engineer-in-Charge.

M & L for Earthing complete with galvanised steel earth plate electrode 6mm thick of size 600x600 mm buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from GL, connected with galvanised iron strip 32x6mm all as shown in Plate No-3, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx50mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 50 mm dia light grade GI tubing for protection of GI Strip 32x6mm, charcoal and salt in alternate 150mm thick layers around GI earth plate, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing GI strip 32 x 6 mm for extension of earth and connected to equipment or panel complete all as specified and directed by Engineer-in-Charge.

S&F MCCB 400 Amps 4 Pole, 35 KA, 415 V, 50 Hz adjustable type and connecting up in the existing panel location including taking out existing unserviceable MCCB complete all as specified and as directed by Engineer-in-Charge.

All as per item No 25 here in before but MCCB 250 Amps 4 Pole, 25 KA, 415 V, 50 Hz complete all as specified and directed.

All as per item No 25 here in before but MCCB 200 Amps 4 Pole, 25 KA, 415 V, 50 Hz complete all as specified and directed.

All as per item No 25 here in before but MCCB 160 Amps 4 Pole, 25 KA, 415 V, 50 Hz complete all as specified and directed.

All as per item No 25 here in before but MCCB 100 Amps 4 Pole, 16 KA, 415 V, 50 Hz complete all as specified and directed.

All as per item No 25 here in before but MCCB 63 Amps 4 Pole, 16 KA, 415 V, 50 Hz complete all as specified and directed.

Dismentling taking down unserviceable flood/street/gate light fitting any type any capacity from Pole/Building for replacement complete all as specified and directed.

S&F LED Street light fitting 70 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.

S&F LED Street light fitting 90 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.

S&F energy saviing environmental friendly, long life exclusive innovative die-cast aluminium IP-66 LED flood light of 120 Watt 5700K with high power LED as light source source complete all as specified and directed.

S&F Security light Bracket made out of galvanised steel light grade pipe of 40mm dia 1.5 mtr long bend to an angle of required size with 02 Nos mild steel clamp 50mm x 50mm and sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer incl dismentling taking down unsv complete all as specified and directed.

M&L for taking out cable loop after excavtion near panel/pole after taking shut down, cutting and setting aside burnt cable ends/lugs and peeling off insulation of cable upto required length for making connection at pole or insertion of new cable lugs in cable, creaming properly and making connection in panel, fedder piller box junction box and tightning with and including new bolts nuts & washers of required complete all as specified and directed by Engr - in -Charge.

Supply, Errecting and fixing of true Vertical position steel tubular swaged pole complete with coat iron base plate, finial taper plug, bolt, nuts and screw,weld and reduced section and logitudional weld Seam through out entire length of pole including 2 coats of black bituminious paint through out intrnely and externely up to planting depth and remaining exterior portion of pole with two caot of aluminium paint over a coat of red oxide as specified type 410 SP 31 (9.00 Mtr long) incl taking down old unserviceable pole all as specified and directed at site. NOTE - Excavation and Earth work and PCC in foundation shall be measured and paid seprately.

Supply, Errecting and fixing of true Vertical position steel tubular swaged pole complete with coat iron base plate, finial taper plug, bolt, nuts and screw,weld and reduced section and logitudional weld Seam through out entire length of pole including 2 coats of black bituminious paint through out intrnely and externely up to planting depth and remaining exterior portion of pole with two caot of aluminium paint over a coat of red oxide as specified type 410 SP-55 (11.00 Mtr long) incl taking down old unserviceable pole all as specified and directed at site. NOTE - Excavation and Earth work and PCC in foundation shall be measured and paid seprately.

Material and labour for shifting of poles by disconnecting all electrical connection/light/bracket taking out pole safely and refixing it to other location as directed by EIC. Note- the job include excavation/returning and filling and disposal for removing/fixing of pole, dismentalling and making of new PCC in foundation and coping etc , transportaion will be responsibilaity of contractor complete all as spd.

Deduct Schedule of Credit of Rs. (-) 14680.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

M/SHansrajbuilder (BID ID -3294751)

K S BUILDERS (BID ID -3294789)

vijay builders (BID ID -3300201)

PARAS RAM ASGOTRA AND SONS (BID ID -3295023)

M/S DHARAM & SONS ENTERPRISES (BID ID -3300104)