REPAIR/REPLACEMENT OF JOINERY, PLUMBING SUNKEN AND SANITARY WORK UNDER E1 AND E2 AREA UNDER GE (W) MATHURA

Amount

Dismantiling floor, hearth or wall tiling including cement motar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premishes complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortor (1:6) for laying floor finishes. complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7-8 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 15mm thick rendering on brick work/concrete surfaces in cement mortar (1:4) for skirting /dado finishes complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 8 to 9 mm thick exceeding 0.18 sqm but not exceeding 0.38 sqm (Square/rectangular) in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

All as per item No 4.00 (here-in-before) but over 10mm thick rendering in CM (1:3) as in skirting/dado.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including 15mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick laid and jointed with pigment to match the shade of the slab including rubbing and polishing including screed bed 20mm thick in CM (1:4) for laying finishes complete all as specified and directed.

M&L for kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including cement plaster 15 mm thick in CM (1:3) laid and jointed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exc 6mtr mean radius, built in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even external surface complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on brick or concrete surface on other than fair faces of brick complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of OBD over one coat of primer on walls complete all as specified and directed.

M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections/ceiling/facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note : Rate for form work if required to be included in the quoted rate by the contrator.

Taking up or down steel tubing 15mm bore pipe complete all as specified and directed.

Taking up or down steel tubing 20mm bore pipe complete all as specified and directed.

S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 15mm bore complete all as specified and directed.

S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 20mm bore complete all as specified and directed.

Taking down wornout existing treatment from sunken portion of WC /Bath/Kitchen/Passage area n exc 2.5 Sqm each including taking down floor tiles, plaster, lime/cement concrete, WC trap complete empty of existing sunk. (Taking down of plumbing & sanitary fixing & fixture shall be measured under relevant items).

M&L for Cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sunken portion complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with liquid water proofing compound complete all as specified and directed. Note:- Liquid WPC shall be measured and paid saperately.

Supply only Liquid water proofing compound of approved make complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed.

S&F GI tubes medium grade, laid on sunken floor as on spout pipe 50mm bore complete all as specified and directed.

M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer a@ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm with and waste fitting of CP, PVC connection and PVC waste pipe and fixing with new brackets including cutting and pinning in ends of brackets complete all as specified and directed.

S&F in repairs 32mm bore waste fittings chromium plated for sinks, basins with long shanks and fly nuts, flange and bedded in red cement and fixed, complete all as specified and directed.

M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

Disconnecting existing tank of capacity 500 litre to 1000 litre, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc including writing with white paint (Date of cleaning), hoisting if required, reconnecting and re-fixing in position including replacement of necessary fittings such as GI nipple etc complete all as specified and directed.

Disconnecting existing tank of capacity 250 litre to 500 litre, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc including writing with white paint (Date of cleaning), hoisting if required, reconnecting and re-fixing in position including replacement of necessary fittings such as GI nipple etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling water tank of 750 Ltr capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling water tank of 1000 Ltr capacity complete all as specified and directed.

S&F in repair for 15mm bib tap standard of PTMT (minimum weight 90 gm) any colour screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs 15 mm size stop cock of PTMT in any colour screwed for iron pipe and weight not less than 90 gram per cock complete all as specified and directed.

S&F in repair 2 way 15mm bore chromium plated bib taps, cast copper alloy, with crutchor butterfly handle , screwed with both ends for iron pipe pipe complete all as specified and directed.

S&F in repair float valve of 20 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib tap cast copper alloy fancy type (min weight 400 gm) screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.

S&F Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified and directed.

S&F in repair CP angle / stop cock fancy type chromium plated 15 mm bore screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair CP Jet spary butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.

S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed.

S&F PVC waste pipe 32mm dia of length 0.8mm to 0.9mm fixed complete all as specified and directed.

S&F in repair vitreous china wash down, water closet pan (pedestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

Dismantling of wall and ceiling boards of any type and any thickness including cover fillets complete all as specified and directed.

S&F 605X605 mm size of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre Including providing and fixing Gypsum Board 4mm thick in ceiling fixed with screw as per manufacturer's instructions complete all as specified and directed.

S&F GI clip in metal seiling system of 600x 600mm module which includes providing and fixing 'C' walll angle of size 20 x 30 x 20 mm of 0.5 mm thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm c/c, suspending the main C carrier of size 10 x 38 x 10 mm made of GI steel 0.7mm thick from the soffit with help of soffit cleat 37 x 27 x 25 x 1.6mm, rawl plugs of size 38 x 12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped spring Tee having height of 24mm and width of 34mm made of GI steel 0.45mm thick is then fixed to main C carrier and in direction to perpendicular to it at 600mm centre with help of suspension brackets. Where ever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gm/sqm (both side inclusive), fixing with clip in tiles into spring T with GI metal ceiling clip in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending complete ass a specified and directed.

S&F GI clip in metal seiling system of 600x 600mm module which includes provides and fixing 'C' walll angle of size 20 x 30 x 20 mm of 0.5 mm thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm c/c, suspending the main C carrier of size 10 x 38 x 10 mm made of GI steel 0.7mm thick from the soffit with help of soffit cleat 37 x 27 x 25 x 1.6mm, rawl plugs of size 38 x 12 mm and C carrier suspension clip and main carrier bracket at 1000mm c/c. Inverted triangle shaped spring Tee having height of 24mm and width of 34mm made of GI steel 0.45mm thick is then fixed to main C carrier and in direction to perpendicular to it at 600mm c/c with help of suspension brackets. Where ever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120gm/sqm (both side inclusive, fixing with clip in tiles into spring T withGI metal ceiling clip in plain beveled edge global white colour tiles of size 600 x 600mm and 0.5mm thick with 25mm height, made of GI sheet having galvanizing of 100gm/sqm (Both side inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5 electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation complete ass a specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutter only of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.

M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters 35 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and as directed.

S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood glazed & skelton shutters (factory made) open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and rabated sash bars any number, edges of framing plain chamfered or rounded fitted with cut mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I Section- 8 clause 8.24 (a) and fitted to frames/chowkats as in door shutters. (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton shutters of 2nd class HW with partially panel shutter open rebated and prepared to receive glass / gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.24 (a) complete all as specified and directed.

S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded colour PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and as directed..

S&F 150 mm MS ordinary rat tail rod pattern spring including roller & roller plate complete all as specified and directed.

M&L for preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.

S&F 150mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.

S&F 150mm long stainless steel handles, oval type complete all as specified and directed.

S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made steel ventilator with top hung shutter including hinges , steel peg stay complete all as specified and directed.

S&F mild steel framed work as grills, gratings etc with end of bars shouldred and / or rivited or forged into spikes, framed guard bar barred iron door ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed.

M&L for applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or wooden beads in shape n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F powder coated aluminium anodised door frame and shutter of section as under and providing 5.50mm thick tinted gass with and including each shutter to be provided with aluminium fittings such as aluminum butt hinges 100mm- 03 Nos, Aluminum handles 150mm- 02 Nos, Aluminium tower bolts 150mm- 02 Nos, rubber neopran beadding, glazing clips and one lock four lever with duplicate keys of make Godrej or equivalent in each opening and 01 No hydraluic door spring etc complete all as specified and directed. Taking down old Aluminium door shutter with chowkhat :- (a) Outer Frame - 100x50x1.20mm (b) Shutter - 90x50x1.20mm (c) Top, middle & Bottom rail 90x50x1.20mm etc

Taking down aluminium door/window of any size/any description and refixing in the same opening after tightening , easing/change the section as required , including fitting the rubber packing aluminium snap beading resetting floor/hydraulic door closer/spring etc complete all as specified and directed.

S&F powder coated aluminium window using 63mmx38mmx1.6mm chowkhats with 48mmx48mmx1.6mm openable section as in shutter including ornamental aluminium grill, 5.5mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100mm-02 Nos, tower bolts 100mm-02Nos, hooks and eye-02 Nos 150mm, butt hinges 100mm 04 Nos etc complete all as specified and directed.

S&F hollow corrugated shape PVC wall lining consisting of 5mm thick decorative colour PVC sheet inclusive of solvent cement and fixing and incl beading at sides on PVC frame as per specifications all as specifed complete all as specified and directed.

S&F in repair 18 mm thick Alstone Hybrid Water Proofing Board in cupboard shutter with decorative on one side & other side balancing white fixed by drilling screws complete all as specified and directed.

S&F Continuous (piano) hinges 40 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction double, (Double T) equal or unequal complete all as specified and directed.

M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F in repair door closer hydraulically regulated designation No. 3 universal type cast iron body suitable for door shutters of 851 to 1000mm in width and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair stainless steel kitchen sink 1 mm thick kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair stainless steel kitchen sink 1 mm thick with drainage board kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall 915 mm x460 mm and bowl size 410 mm x330 mm x 160 mm complete all as specified and directed.

S&F in repair for stainess steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in panes n.exc. 0.5 sqm each pane including hacking out old glass panes complete all as specified and directed.

S&F 2mm PVC frosted sheet as in glass panes incl necessary fixing arrangement such as solvent etc incl hacking out old glass panes complete all as specified and directed.

S&F in repair fancy curtain rod mild steel chromium plated 25mm dia with bracket knobs, including end cap for curtain rod complete all as specified and directed.

S&F in repairs peg set of three of mild steel bright finished, fixed, complete all as specified and directed.

S&F in repair mild steel Door seal for doors upto 1000mm long and thickness not less than 1mm complete all as specified and directed.

S&F in repair PVC mirror cabinet size 300X450mm of standard size fixed to wall with PVC sleeves and steel screws complete all as specified and directed.

S&F in repair Glass shelf 450mm longX100 mm wide including brackets fixed to wall with sleeves and screws complete all as specified and directed.

S&F in repair Corner Glass shelf assembly of size 300mm x 300mm including bracket fixed to wall with PVC slips and stainless steel screw complete all as specified and directed.

S&F in repairs vitreous china urinal, half stall type, white incl 15mm bore push tap any colour of PTMT screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; fixing discharge pipe, flush pipe, grating and union for discharge, complete all as specified and directed.

S&F powder coated aluminum partition using 95.6mmx 44.8mm x 1.00-1.2mm frame work with 12mm thick exterior grade veneered particle board with decorative veneers on both face/5.5mm thick frosted glass including aluminum beading for fixing board each panel n.exc 1.2 Sqm complete all as specified and directed.

S&F float valve of 20 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

SARTHAK CONSTRUCTIONS

brajcon

Ms Kamal Kant Agarwal

mh enterprises

M/S MRS BHASKAR

B S ENTERPRISES

SHAKSHI ENTERPRISES

M/s Hoti Lal Contractor