COMPREHNSIVE MAINTENANCE AND CERTAIN MISC BR AND E/M WORKS AT MES COLONY, HQ CWE OFFICE COMPLEX, BSO YARD, GE EAST OFFICE AND 106 MED REGT UNDER GE (EAST) MATHURA

Amount

Taking down cement plaster on brick or stone walls/ceiling concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufactures instructions finish the surface to even & fair complete all as specified and as directed. Note : Liquid WPC shall be measured and paid seperately under relevant item of this BOQ.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed.

M&L for dubbing coat of plaster 10mm thick in cement mortar 1:4 and rendering 5 mm thick in cement 1:3 on dubbing surface as in ceiling finished the surface even & fair without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for removal of plants with roots from roof/wall/shafts any size and height and applying HCL chemical and filling hole with cement concrete 1:2:4 minimum 0.05 cum in each location and finished properly to match with the exist surrounding area complete all as specified and as directed.

M&L preperation of newly plastered surfaces of wall and applying two coats of weather proof acrylic exterior paint light shade over a coat of primer (100% Acrylic) over 2mm thick wall care putty using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures upto the height of (G+2) floor complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over and including a coat of alkali resitant primer complete.

M&L preperation of newly plastered surfaces of walls and applying two coats of oil bound distember over a coat of alkali resistant primer using spray machine, spray hard to receive area to achieve excellent application using limited manpower over and including a coat of 1mm thick wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M&l for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying one coats of white wash all as specified and directed by engineer in charge.

M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted complete all as specified and as directed.

M&L for providing wall care putty 2mm thick on plastered surfaces of wall complete as specified and as directed.

M&L for complete removal of existing treatment of wall surface and applying two coats of plastic emulsion, white or tinted over a coats of acrylic wall putty minimum 1mm thick and make the surface smooth after 4-6 hrs drying time and sanding the surface complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surface and sanding the surface to make it smooth and ready for painting and applying one coat of deco solvent based primer over the surface applying 2 coats of acrylic wall putty to make the surface smooth after 4-6 hrs drying time and sanding the surface , one coat of deco solvent based primer should be applied over the arcylic putty to fill the pours one step of sanding should be done before the application of 1st coat of royale base coat and 2nd coat of royale luxury emulsion diluting with water as per recommanded procedure. After the drying time of 3-4 hrs applying top coat of co polymer based interior special effects emulsion which will not rag or sag on vertical surface with abrasion resistance odourless and non toxic properties to provide different type of special effects such as crinkles dapple weaving, canvas, spatula, colourwash, ragging, sponging, combing, brushing etc with different tools complete all as directed by Engineer-in-Charge.

M&L for complete removal of old decrative treatments from walls and preperation of old decorative surfaces of wall and applying two coats of weather proof acrylic exterior paint light shade over a coat of primer (100% Acrylic) over 1mm thick wall care putty using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures upto the height of (G+2) floorcomplete all as specified and as directed.

M&L for preperation of old decorative surfaces of wall and applying a coat of weather proof acrylic exterior paint light shade using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures upto the height of (G+2) floor complete all as specified and as directed.

M&L for preparation of old polished wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of french polish complete all as specified and directed.

M&L for preparation of old surface and appling one coat of French polish on old wooden surfaces of any description, width or girth complete all as specified and directed

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified & directed by Engineer-in-Charge

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 B0 (using 12.50 mm graded stone aggregate) in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for cement concrete 1:7:12 type F2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for 25 mm (Average) thickness cement concrete type- B0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling course below tiles etc finishing cement concrete surface even and fair without using extra cement compete all as specified and as directed.

M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1 : 4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in 600x300x7-8mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectagular) polished,area of each tiles exceeding 0.36 sqm but nexc 0.80, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

All as per item serial No 26 here in before but as in skirting/dado laid over and including 10 mm thick rendering in cement motar 1:4. complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off out of MoD land complete all as directed

M&L 75 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and paving etc. complete all as specified and as directed.

M&L non skid cermic ENDURA coloured tiles 7-8mm thick (square/rectangular) area of each exc 0.11 Sqm but nexc. 0.18 Sqm as in floors set and jointed in neat cement slurry & pointed with coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Dismantling of stone slab of any description of thickness in floors & aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 16-18mm thick Z black granite or red rubby of granite work (table rubbed and polished) in steps jambs,window cills, cooking platform and like laid over and including 15 mm thick screed in cement mortar 1:4 pointing in white cement using marble dust with admixture of pigment to match the colour of granite including rounded/ half rounded edges of granite and making hole for gas pipe in RCC shelves complete all as specified and as directed.

S&F in repair EWC 650x340x740mm S trap Athos One-Piece Rimless Western Commode with In-Built Jet & Siphonic Flushing System combination pattern including cistern and other connected accessories and fixing to floor complete all as specified and directed. Make: Ruhe/Kohler/Jaquar

S&F in repair Vitrreous china wash down water closet pedestral pan white, Plstic water closet seat, closed pattern with recessed bottom, and seat cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. Make: Ruhe/Kohler/Jaquar

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern white, with inlet, ball valve, float, handle and 32mm dia PVC flush pipe complete all as specified and as directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as specified and as directed.

S&F in repair vitreous chinaware wash hand basin white counter top size 560x400mm excluding taps, waste, chain but including brackets waste coupling and waste pipe complete all as specified and as directed. Make: Jaquar/ Kohler/ Grohe

S&F in repair vitreous chinaware wash hand basin white flat back size 545x400mm excluding taps, waste, chain but including brackets waste coupling and waste pipe complete all as specified and as directed.

S&F in repair Wall Mixer head and hand arrangement combination pattern including Telephonic hand shower, flexible tube and hook connecting legs and wall flanges, crutch etc complete all as specified. Make Jaquar Cat Part No: LYR- 38145/ Cera Cat Part No: F-1003403/ Kohler Cat Part No: 98754IN-4-CP

M&L in repair single lever WHB mixer 15mm bore cast copper alloy chromium plated 450mm braided connection pipe without pop up complete all as specified and as directed. Make : Jaquar Cat part No KUP-CHR-35011BPM/ Kohler Cat Part No: K-33063IN-4ND-CP ./Cera Cat Part No: F1021451

S&F in repair sink mixer with EXTENDED swinging spout 450mm long (wall mounted model )with connecting legs and wall flanges for 15mm bore dia iron pipe complete all as specified and as directed. Make Jaquar Cat Part No FLR-CHR-5309N/ Cera Cat Part No: F-100351 / Kohler Cat Part- No 37315 IN-4-CP.

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed. Make : Jaquar/Kohler/CERA

S&F in repair two way bib cock cast copper alloy chromium plated superior quality with wall flange fixed to 15mm bore dia iron pipe complete all as specified and as directed. Make: Jaquar Cat part No KUP-CHR-35041PM/ Cera Cat Part No: F-1003161/ Kohler Cat Part No: K-16094IN-CP

S&F in repair Bip tap long body cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipe of 15mm bore dia complete all as specified and as directed. Make : Make Jaquar Cat Part No: KUP-CHR-35037/ Cera Cat Part No: F-1003151/ Kohler Cat Part No: K-16093IN-4-CP .

S&F in repairs concealed stop cock cast copper alloy chromium plated reduced body with adjustable wall Flange for 15mm bore pipe complete all as approved and as directed. Make: Jaquar/ Kohler/ Cera

S&F in repair Hand jet health faucet 15 mm bore with CP flexible tube 1.2m and all connected fittings complete all as specified and as directed. Make: Jaquar Cat part No ALD-CHR-565GA/ Cera Cat Part No:F-8030116AB/ Kohler Cat Part No: K-12927IN-CP

S&F in repair cast copper alloy chromium plated Angular cock for 15 mm dia bore iron pipe with wall flange complete all as specified as directed.Make : Make: Jaquar Cat Part No: KUP-CHR-350553PM/ Cera Cat Part No: F-1003201/ Kohler Cat Part No: K-80154IN-4AV-CP .

S&F in repair cast copper alloy chromiumplated two way Angle cock 15 mm bore with wall flange complete all as specified and as directed. Make : Jaquar/Kohler/Cera

S&F in repair stainless steel Jet spray with 1.20 mtr hose fixed with EWC complete all as specified and as directed.

S&F in repair chromium plated over head shower (300x300)mm of square shape with 600 mm long arm complete all as specified and directed. Make Jaquar Cat Part No: OHS-CHR1639/ Cera Cat Part No: F-7010109SS/ Kohler Cat Part No: K-73038IN-CL-CP .

S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repair tolilet paper holder of stainless stell fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make: Jaquar Cat part No AKP-CHR-35753PS/ Cera Cat Part No: F-5007110/ Kohler Cat Part No: K-5633IN-CP

S&F in repairs bathroom cubical made of 10-12mm thick toughned glass including frame with bracket, connector hinges and handles of stainless steel, door of bath cabinet also of toughned glass complete fixed at site as size required and as approved. Make: Jaquar or equivalent. (Note : Size of glass wall will be measured including frame for payment)

S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and as directed.

S&F in repair corner glass shelf 60cm x 10cm with SS bracket fixed to wall complete all as approved and as directed. Make: Jaquar/ Kohler/ parryware

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm including fixing complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with stainless steel bracket guard and railing 60 cm long complete all as approved and directed. Make: Jaquar/ Kohler/ G

S&F in repair towel rack of 600mm long with lower hangers of approved make complete all as specified and directed. Make: Jaquar Cat part No CPA-CHR-1181FH/Cera Cat Part No: F-5012101CH/ Kohler Cat Part No: K-25066IN-CP

S&F in repair tubular towel rail of brass Chromium plated 20mm dia, ‘D’ type 60cm long between flange complete all as specified and directed. Make: Jaquar Cat part No CPA-CHR-1111/Cera Cat Part No: F-5013104CH/ Kohler Cat Part No: K-25065IN-CP

S&F in repairs stainless steel towel Ring 450mm dia fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as approved and as directed. Make: Jaquar/ Kohler/ Cera

S&F stainless steel waste coupling for 32mm bore discharge pipe for WHB/Sink complete as specified and as directed.

S&F in repairs PVC flexible waste pipe 32 mm dia.

S&F in repair Stainless steel Bottle trap of 32mm bore dia of discharge pipe having min. water seal of 25mm (min. weight 260gms) complete all as approved and as directed.

S&F in repairs stainless steel Grating doom 100mm dia with hole (Minimum weight 25gms) complete all as specified and as directed.

Taking up or down 15 mm bore of dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and as directed.

S&F steel tubing, medium grade, galvanised 15 mm bore including all fittings fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing ,steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

Taking up or down 20 mm bore of dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and as directed.

S&F steel tubing, medium grade, galvanised 20 mm bore including all fittings fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

S&F in repair rotational moulded, polythene water storage tank Triple layer white in colour (Cylindrical vertical with closed top) 1000 Ltr capacity hoisted and fixed in position complete all as specified and as directed.

S&F in repair rotational moulded, polythene water storage tank Triple layer white in colour (Cylindrical vertical with closed top) 500 Ltr capacity hoisted and fixed in position complete all as specified and as directed.

S&F ball valve of PTMT high pressure with polythene float and fly nuts complete screwed for 20 mm bore dia iron pipes or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 20mm bore GI Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm-65gms)

Cleaning of HDPE tank of capacity 500 ltr to 1000 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.

S&F in repair Ball valve of PTMT high pressure with polythene float and fly nuts complete screwed for 20 mm bore dia iron pipes or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs cover for HDPE water tank of capacity 500/750/1000 ltrs rotating type with frame including nut bolt complete.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.

S&F Solid WPC (Wood Polymer Composit) single extruded Door Frame of size 90mm x 45mm single rebate suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made Solid WPC (Wood Polymer Composit) single extruded Door Shutter 28 to 30mm thick comprising of virgin polymer of K value of 58-60 (suspension grade), calcium carbonate and natural fibers ( wood powder/ rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 900 N( Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to speed of flame of class A category with propery of being termite/ borer proof water/ moisture proof and fire retardant and fixing with stainless full body threaded star headed counter sunk S.S.screws, fixing in frame at site complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section and fixed complete all as specified and as directed.

S&F Extruded Aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and as directed.

S&F 100mm long stainless steel butt hinges complete all as specifed and directed.

M&L for Aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. fixing in frame at site complete all as specified and as directed.

M&L for Aluminium anodised window and ventilator shutters, slide type of sliding window with or without sash bars without sash bars, aluminium sections weighing 0.55 kg/m powder coated (minimum wt of powder coating 50 micron) including necessary joitning cleats, glazing clips, rubber packing, aluminium snap beading, screws, anodised aluminium fittings such as locking arrangements complete all as specified and as directed.

M&L for Aluminium anodised window and ventilator shutters, side hung type with or without sash bars without sash bars, aluminium sections weighing 0.55 kg/m powder coated (minimum wt of powder coating 50 micron) including necessary joitning cleats, glazing clips, rubber packing, aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F figured glass 4mm thick pin head type and glazing to aluminium frame in squares n exc. 0.5 sqm metre in each pane complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F sheet glass, ordinary quality 4mm thick and glazing/fixed to aluminium/ Steel/ wooden frame in square exc. 0.5 square metre in each pane complete all as specified and as directed.

S&F in repair curtain rod stainless steel chromium plated 20mm dia with bracket knobs including end cap complete all as specified and directed.

S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 900mm x 750mm x 255 mm complete all as specified and as directed.

S&F in repairs Floor door stopper of brass body, and tongue with hard drawn steel spring hard overall length of cover plate 140mm complete all as specified and as directed.

S&F in repairs PVC door seal upto 1.20 Mtr long fixed with wooden/ Aluminium door complete all as specified and as directed.

S&F in repairs stainless steel peg set of 8 hooks fixed with wall or wooden door complete all as specified and as directed.

S&F in repairs aluminum (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S&F in repairs 40mm dia, brass cupboard knobs fixed with nut, screw and washer of Brass, bright finished for cub board shutters/ Kitchen shutters complete all as specified and as directed.

S&F in repair 100 mm size mortice lock of brass, vertical type,4 levers, complete all as specified and as directed.

S&F in repair stainless steel lock fixed to toughen glass door shutter/ Aluminium door shutter, horizontal type, 4 levers, complete all as specified and as directed.

Taking down carefully aluminium / copper point wiring (light, fan, socket any type, power, bell etc.) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. (Note: Credit for above items should be made as per credit Schedule separately).

Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc or including sunk cast iron /pressed steel/terminal boxed for mounting flush type switches/sockets etc with 3 mm thick phenolic laminated sheet covers and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge as described below:-

a) One light/ fan point controlled by one way switch 5 amp complete.

b) One 3 pin 5 Amps socket point controlled by one way switch on same board.

c) One 3 pin 5 Amps socket point controlled by one way switch on independent board.

d) One bell point controlled by one push button.

e) One light point controlled by two 2-way switches.

All as per item No. 4 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete.

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module.

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply and Fixing Modular fan Regulator electronic step type complete all as specified.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete.

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified.

Supply and Fixing in replacement switch piano type, SP, one way, flush type 5 Amps complete all as specified.

Supply and Fixing in replacement socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified.

Supply and Fixing in replacement socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified.

Supply and Fixing in replacement switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified.

Supply and Fixing in replacement bell push siwtch piano flush type, SP, one way, 5 Amps complete.

Supply and fix in replacement ceiling rose surface bakelite 65mm x 50mm three terminals complete.

Supply and fix in replacement lamp holder, PVC / polycarbonate type with back plate.

Supply and fix in replacement mini MCB enclosure including DP 16 amp, type 'C' curve complete.

Supply and fix in replacement Bell Ding dong type, 230 Volts complete with connection.

Supply and Fixing in replacement fan Regulator piano flush type (Socket type as per existing), electronic step type complete all as specified.

M & L for Sub Main Wiring wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(Note: Two runs of 4 Sq mm (P&N), one run of 4 Sq mm earth wire & One run of PVC casing and caping will be measured as one RM).

All as per Item No 23 but for 10 Sqmm

Supply & fix in repair indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x10 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F in repair surface mounted bulk head LED light fitting, capacity 10 watt, opal diffuser, IP 65 protection complete with all accessories and connection complete all as specified and as directed. Make: Bajaj Cat part BIBWP10W LED or equivalent in Philips / Havells / Wipro

Supply and fix LED 9 W suitable for normal holder (Base Cap B22 / E14) complete all as specified.

Supply and install in replacement of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified.

Supply & fix in repair recess type, 35/36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F in repair LED bed side light fitting, 3 watt, wall mounted with adjustable arm, On /Off inbuilt switch including connection complete. Make : Havells or equivalent to Philips / Bajaj / CG or as directed as per site

S&F in repair indoor wall mounted fitting, brushed nickel finishfixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts complete Make: Havells cat part No LHFOAJE1TZ1I060

S&F in repair LED post top light fitting 30W IP-65 rated completeall as specified and directed. Make: Surya Cat part No SLE PT 30W-ETPP or equivalent.

S&F in repair LED Round/square recess mounted slim downlighter 12 watt, integrated electronic driver, co- related colour temperature (CCT) of 6500K complete all as specified.

All as per Item No 35 but for 18 Watt

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description.

S&F in replacement MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

All as per Item No 37 but for 8 Way

All as per Item No 37 but for 4 Way

Supply & fix in replacement MCB SPN 63 Amps,' C' series , bracking cap10KA, 240V complete.

Supply & fix in replacement of MCB SPN 40 Amps,' C' series , bracking cap 10KA, 240V complete.

Supply & fix in replacement of MCB SPN 6-32 Amps,' C' series , bracking cap 10KA, 240V complete.

Supply & fix in replacement of MCB SP 6-32 Amps, ' C' series ,bracking cap 10KA, 240V complete.

Supply and fix in replacement SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Volts with all connection complete all as specified and directed Make : Havells or equivalent of Legrand /L&T/ C&S

Supply & fix in replacement metal clad SPN plug top 20 Amp for fixing on AC Box complete.

Supply and fix modular MCB DP 16 Amp, ' C' series, 240 V complete all as specified and directed.

S&F in repair Plastic Surface mounting box 1 / 2 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

S&F in repair Plastic Surface mounting box 3 / 4 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

S&F in repair Plastic Surface mounting box 6 / 8 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 3 way to 6 way including removing & re-fixing of existing switch / socket and complete connection all as directed. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 8 way to 12 way including removing & re-fixing of existing switch / socket and complete connection all as directed. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately.

M&L for Modular metal flush box 1/2 Module complete all as specified and directed.

M&L for Modular metal flush box 3 Module complete all as specified and directed.

M&L for Modular metal flush box 4 Module complete all as specified and directed.

M&L for Modular metal flush box 6 Module complete all as specified and directed.

M&L for Modular metal flush box 8 Module complete all as specified and directed.

M&L for modular white cover plate with frame, 1 / 2module complete all as specified and directed.

M&L for modular white cover plate with frame, 3 module complete all as specified and directed.

M&L for modular white cover plate with frame, 4 module complete all as specified and directed.

M&L for modular white cover plate with frame, 6 module complete all as specified and directed.

M&L for modular white cover plate with frame, 8 module complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Casing and Caping and its all accessories of suitable size on wall/roof surfaces ( making good all to the disturbed surfaces as per existing) including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing including gang box / 2.0mm thick MS terminal box as per site requirement for fixing switches, sockets, fan regulators etc fixed to wall with 3mm thick laminated sheet top cover complete all as specified for:-

a) One light point/ fan point / bell point controlled by one switch

b) One 3 pin 5 Amps socket point controlled by one way switch on same board.

c) One 3 pin 5 Amps socket point controlled by one switch on independent board

All as per item No. 62 here-in-before but with 4.0 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement switch piano type , SP, one way, flush type 5 Amps complete all as specified.

Supply and fix in replacement socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified.

Supply and fix in replacement socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified.

Supply and fix in replacement switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified.

Supply and fix in replacement fan Regulator piano flush type, electronic step type complete all as specified.

Supply and Fixing in repair modular switch 6 Amps single pole one-way, 1 Module complete.

Supply and Fixing in repair Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply & Fixing in repair modular fan Regulator electronic step type complete all as specified.

Supply and Fixing in repair modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete.

Supply and Fixing in repair modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.

S&F in repiar Modular AC Box Plastic enclosure, heavy duty with single pole MCB 20 amps 'c' series and plug top complete as directed. Make: Anchor Cat part No 98488 or equivalent

Supply & fix in replacement of indoor wall mounted fitting, brushed nickel finish fixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts-02 Nos all as directed at site. Make:-Havells Cat Part No. FLORETINE WL 2LS B22 SS or equivalent make in Crompton/ Philips C&S.

Taking down carefully service connection of any type complete all as directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out all as specified and as directed by Engr-In-Charge.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed of following sizes :- Note:- HDPE pipe rate shall be deemed in quoted rate above.

LT XLPE cable size 10 sq mm 2 core

LT XLPE cable size 16 sqmm 4 core

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, triple pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed.

Supply & fix in replacement of MCB TPN 40 to 100 Amps,' C' series , bracking cap 10KA, 415V complete including taking down old MCBs all as specified and directed.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs with connections complete all as specified and directed. Note : -MCB & MCB /MCCB DBs shall be of same make and measured and paid seperately under respective items of Sch A. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

Supply & fix in replacement of MCCB 250 Amps, thermal magnetic based adjustable type, breaking cap 36 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed.

Supply & fix in replacement of MCCB 160 Amps, breaking cap 25 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed.

Supply & fix in replacement of MCCB 125 Amps, breaking cap16 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed.

S&F in repair driver suitable for existing LED panel light fittings, 36 watt as directed.

S&F in repair driver suitable for existing LED down light fittings 15 watt as directed.

S&F in repair driver suitable for existing LED bed side light fittings 03 watt as directed.

S&F in repair/ replacement High Bay LED Light of 70 watt complete all as specified & as directed

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) incl depositing the old one in MES store yard complete all as directed by Engr-in-Charge.

Supply and fixing in replacement of fresh air/ ventilator fan made of sturdy engineering plastic with built in louvers, AC, 230Volt single phase, 50 Hz of size 250 mm sweep. incl depositing the old one in MES store yard.

All as per item no 94 but for 300 mm Sweep.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and Louvers incl depositing the old one in MES store yard complete of following sizes :-

S&F in repair casing caping of size 25 mm & length 2 Meter of each piece, complete all as specified and directed by Engr-in-charge.

Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified and as directed including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery including necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit (v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.

Deepak Saxena (BID ID -3497397)

VASUNDHARA AND COMPANY (BID ID -3504222)

shyam construction (BID ID -3498202)