Construction of 03 Nos. 11KV Line for Releasing 03 Nos. Commercial Connections of Sh. Ashok Khera, Jaypee Infratech

Amount

08 KW Commercial Connection at 8Km RHS Dankaur Toll Plaza, Yamuna Expressway

Safe Cartage of following centralised stock material from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 3 to 12

ST Pole 11Mtr.

11KV Dropper & Top Channel 100x50x2240mm

ACSR Weasel Conductor.

Sub-Station Base Angle for T/F 75/75x6x2240

11KV Pin Insulator with Pin

Stone Pad

Earthing Complete

T/F 25KVA

11KV 3x70sqmm XLPE Cable

11KV O/D Termination Kit suitable for 3x70sqmm XLPE Cable

Errection of above Centralised material and Supply and errection of the below De-Centralised material for completing the works as per RESPO.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a) ST/PCC - 11Mtr Long Pole and PCC - 8.5 Mtr. Long Pole

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST/PCC - 11Mtr Long Pole and PCC - 8.5 Mtr. Long Pole

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) ST/PCC - 11Mtr Long Pole and PCC - 8.5 Mtr. Long Pole

FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT.

FIXING OF 11KV DROPPER CHANNEL AND MS TOP CHANNEL (100X50X2240MM) AS PER SITE REQUIREMENT WITH COMPLETE WORK IN ALL RESPECT.

FIXING OF SUB STATION BASE ANGLE FOR T/F (75X75X6X2240MM) AS PER SITE REQUIREMENT WITH COMPLETE WORK IN ALL RESPECT.

FIXING OF STONE PAD AS PER SITE REQUIREMENT WITH COMPLETE WORK IN ALL RESPECT.

FIXING AND MAKING OF JUMPERS BY ACSR Weasel CONDUCTOR AS PER SITE REQUIREMENT WITH COMPLETE CONNECTION AND WORK IN ALL RESPECT.

Preparation, fixing and Commissioning of 11 KV Power Cable ends: Fixing and Making of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x70sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.

Fixing and Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting.

PROVIDING AND FIXING OF G.I. PIPE 6" Dia for the Pole risers as per site requirement with complete work in all respect.

PROVIDING AND FIXING OF Holding CLAMS WITH NUT & BOLT s per site requirement with complete work in all respect.

Supply of 140mm OD PN-4-PE-80 Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED)

Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.

Laying of HDPE Pipe PE-80, PN-6, DN-160mm dia by HDD trenchless method for HOSTING OF 11 KV 3x70sq.mm XLPE cable as per site requirement.

Laying, Hosting and commissiong of 11 KV 3x70sqmm XLPE Cable Double Ckt. in HDPE Pipe dia after digging HDD trenchless method boring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work with Riser on Double Pole after fixing of GI Pipe with complete work in all respect.

Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and material in the scope of contractor)

Providing and Fixing of MS Nut, Bolt and Washers as per site requirement.

Installation and Commissioning of 11/0.4 KV, 25 KVA T/F with Mounted on Double Pole as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

08 KW Commercial Connection at 26M Ramp Toll Plaza, Yamuna Expressway 07Km LHS Dankaur

Safe Cartage of following centralised stock material from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 35 to 44

PCC Pole 8.5Mtr

11KV Dropper & Top Channel 100x50x2240mm

ACSR Weasel Conductor.

Sub-Station Base Angle for T/F 75/75x6x2240

11KV Pin Insulator with Pin

Stone Pad

Earthing Complete

T/F 25KVA

11KV 3x70sqmm XLPE Cable

11KV O/D Termination Kit suitable for 3x70sqmm XLPE Cable

Errection of above Centralised material and Supply and errection of the below De-Centralised material for completing the works as per RESPO.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a) ST/PCC - 11Mtr Long Pole and PCC - 8.5 Mtr. Long Pole

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST/PCC - 11Mtr Long Pole and PCC - 8.5 Mtr. Long Pole

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) ST/PCC - 11Mtr Long Pole and PCC - 8.5 Mtr. Long Pole

FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT.

FIXING OF 11KV DROPPER CHANNEL AND MS TOP CHANNEL (100X50X2240MM) AS PER SITE REQUIREMENT WITH COMPLETE WORK IN ALL RESPECT.

FIXING OF SUB STATION BASE ANGLE FOR T/F (75X75X6X2240MM) AS PER SITE REQUIREMENT WITH COMPLETE WORK IN ALL RESPECT.

FIXING OF STONE PAD AS PER SITE REQUIREMENT WITH COMPLETE WORK IN ALL RESPECT.

FIXING AND MAKING OF JUMPERS BY ACSR Weasel CONDUCTOR AS PER SITE REQUIREMENT WITH COMPLETE CONNECTION AND WORK IN ALL RESPECT.

Preparation, fixing and Commissioning of 11 KV Power Cable ends: Fixing and Making of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x70sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.

Fixing and Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting.

PROVIDING AND FIXING OF G.I. PIPE 6" Dia for the Pole risers as per site requirement with complete work in all respect.

PROVIDING AND FIXING OF Holding CLAMS WITH NUT & BOLT s per site requirement with complete work in all respect.

Supply of 140mm OD PN-4-PE-80 Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED)

Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.

Laying of HDPE Pipe PE-80, PN-6, DN-160mm dia by HDD trenchless method for HOSTING OF 11 KV 3x70sq.mm XLPE cable as per site requirement.

Laying, Hosting and commissiong of 11 KV 3x70sqmm XLPE Cable Double Ckt. in HDPE Pipe dia after digging HDD trenchless method boring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work with Riser on Double Pole after fixing of GI Pipe with complete work in all respect.

Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and material in the scope of contractor)

Providing and Fixing of MS Nut, Bolt and Washers as per site requirement.

Installation and Commissioning of 11/0.4 KV, 25 KVA T/F with Mounted on Double Pole as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

20 KW Commercial Connection at 26M LHS Yamuna Expressway, GB Nagar

Safe Cartage of following centralised stock material from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 67 to 78

PCC Pole 8.5Mtr

11KV Dropper & Top Channel 100x50x2240mm

ACSR Weasel Conductor.

Sub-Station Base Angle for T/F 75/75x6x2240

11KV Pin Insulator with Pin

Stone Pad

Earthing Complete

T/F 63KVA

11KV 3x70sqmm XLPE Cable

11KV O/D Termination Kit suitable for 3x70sqmm XLPE Cable

11KV X-Arm

11KV Disc Insulator with Fittings

Errection of above Centralised material and Supply and errection of the below De-Centralised material for completing the works as per RESPO.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole Structures (a) ST/PCC - 11Mtr Long Pole and PCC - 8.5 Mtr. Long Pole

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST/PCC - 11Mtr Long Pole and PCC - 8.5 Mtr. Long Pole

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) ST/PCC - 11Mtr Long Pole and PCC - 8.5 Mtr. Long Pole

FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT.

FIXING OF 11KV DROPPER CHANNEL AND MS TOP CHANNEL (100X50X2240MM) AS PER SITE REQUIREMENT WITH COMPLETE WORK IN ALL RESPECT.

FIXING OF SUB STATION BASE ANGLE FOR T/F (75X75X6X2240MM) AS PER SITE REQUIREMENT WITH COMPLETE WORK IN ALL RESPECT.

FIXING OF STONE PAD AS PER SITE REQUIREMENT WITH COMPLETE WORK IN ALL RESPECT.

Laying, spreading, lifting and final sagging of 3 OR 4 phases ACSR Weasel conductor in accordance with Line chart includidng binding and fixing of all accessories in 03Nos OR 04 Nos. Conductor in parallel as per site requirement.

Preparation, fixing and Commissioning of 11 KV Power Cable ends: Fixing and Making of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x70sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect.

Fixing and Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting.

PROVIDING AND FIXING OF G.I. PIPE 6" Dia for the Pole risers as per site requirement with complete work in all respect.

PROVIDING AND FIXING OF Holding CLAMS WITH NUT & BOLT s per site requirement with complete work in all respect.

Supply of 140mm OD PN-4-PE-80 Grade UV Stabilized HDPE Pipe.(PVVNL GTP APPROVED)

Drilling of dia 220 mm in two parallel bores for Double Curcuit by trenchless method by horizontal boring machine at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground level with complete work in all respect as per RESPO.

Laying of HDPE Pipe PE-80, PN-6, DN-160mm dia by HDD trenchless method for HOSTING OF 11 KV 3x70sq.mm XLPE cable as per site requirement.

Laying, Hosting and commissiong of 11 KV 3x70sqmm XLPE Cable Double Ckt. in HDPE Pipe dia after digging HDD trenchless method boring including complete connections at both ends after providing and crimping of lugs of proper size for completion of work with Riser on Double Pole after fixing of GI Pipe with complete work in all respect.

Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop and making risers at double pole and re-filling of pits in proper manner with required material at kacha/pakka and hot mix road. (All Work and material in the scope of contractor)

Providing and Fixing of MS Nut, Bolt and Washers as per site requirement.

Installation and Commissioning of 11/0.4 KV, 63 KVA T/F with Mounted on Double Pole as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

FIXING OF 11KV X ARM AS PER SITE REQUIREMENT.

FIXING OF DISC INSULATOR WITH FITTINGS AS PER SITE REQUIREMENT.

OM SAI ELECTRICALS CO.

AYAAN ENTERPRISES