Extension of W/C of outlet RD 22240-L Manawali Minor (Pipeline)

Amount

Works Details

Providing, lowering, laying cutting ( cut surface to be uniformly finished), joining with rubber rings marked with IS 5382 and testing of SPIGOT AND SOCKETTED RCC NP2 MARKED WITH IS : 458-1988 and specials in to unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge. as per HSR item no. 28.60 for 400 mm dia

Earth work excavation for pipe line running under pressure in trenches and pits in open area where disposal of surplus earth is done alongwith the alignment including trimming & dressing sides, leveling of beds of trenches to correct grade, cutting joints holes, cutting trees and bushes etc. refilling consolidation and watering of refill, in 15 cm layers as per (exceeding 2.25 to 3.00 meter depth as HSR item no. 6.8 (b) (ii) exceeding 1.5 Mtr depth but upto 2.25 mtr depth excluding timbering & shoring

First class brick work laid in cement sand mortar 1:5 in foundation and plinth Side Lining Nakka & culvert complete in all respect as per approved drawing & PWD specification and as per HSR item No. 11.3

Cement Concrete 1:4:8 with brick ballast 40mm nominal size in foundation and plinth HSR item No. 10.36 (for Nakka Culvert etc.)

Cement plaster 10mm thick cement mortar in 1:4 fillet gola plastring of nakkas and culvert etc. Complete in all respect as per approved drawing and PWD specification as per HSR item No. 15.5

Supply of RCC Panels size 22"x22" at site of work, as per approved drawing design and specification (N.S. Item)(As per CADA)

Fixing of RCC Panel size 22"x22" at site of work, as per approved drawing design and specification (N.S. Item) (As per CADA)

Supply of RCC Lids size 16" dia at site of work as per approved drawing design and specification (N.S. Item) (As per CADA)

Providing fixing 400mm dia CI nakka complete in all respect as per current market rate as per CADA pattern and rate approved vide CE/CADA memo no. 2565/30W dt 03.05.2016

Providing & fixing STEEL BAR EMBEDDED PLASTIC STEPS OF SIZE 263 MMX165 MM of orange colour, confirming to specifications, in pump chambers, manholes etc, having minimum 3 mm thick polypropylene polymer confirming to IS: 10910 encapsulated on 12 mm dia ribbed steel bars per IS:1786 the rate include cost of setting the same to correct lines and levels dully embedded in 1:2:4 cement concrete including carriage, loading, unloading stacking, handling, rehandling etc complete in all respects to the satisfaction of EIC, HSR item no. 29.28

MOHAN LAL

J.S.R. POWER BUILDER AND DEVELOPERS