SPECIAL REPAIR TO BLOCK NO P 19 MD HAV QTRS REPLACEMENT OF SUMMER/COOLING APPLIANCES AGAINST BER AND PROVN OF METER AT JCOS/ORS MD ACCN AND CERTAIN MINOR WORK UNDER GE SATWARI AT MIL STN JAMMU

Amount

Dismantling floor, hearth or wall tiling including complete cement mortar bedding, terrazo dado from wall surface removing serviceable tiles to store and rubbish off the premises.

M&L non skid joint free anti scratch/antifungal ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1 :6 etc complete all as specified.

M&L for glazed ceramic jont free anti scratch/antifungal coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, as in skirting/dado etc. set & jointed in cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 finished rough for wall tilling etc complete all as specified.

M&Lnon skid joint free anti scratch/antifugal ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1 :6 etc complete all as specified.

M&L for 25 mm thick PCC (1:2:4) type B-0 (Using 12.50mm graded stone aggregate) as in floor etc complete.

M & L Glazed digital scratch/antifugal ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified. ( sample as approved & kept in GE's sample room)

Material and labour for machine cut kota stone single piece slab in staires steps & flooring 18mm to 22mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beez wax and including over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) all as specified and directed by Engineer-in-Charge. (Note Length of Kota slab not less than width of Stair).

Material and labour for machine cut kota stone slab 10mm to 12 mm thick as in riser/skirting/dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beez wax polishing complete over and including 10mm thick rendering in cement mortar 1:4 all as directed by Engineer-in-Charge.

M&L for 18-20mm thick Green Marble (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, grinding and polishing slab including 20mm thick screed bed in CM 1:4 etc complete all as specified.

Demolition of brick/stone/boulder masonary work built in cement mortar or cement lime mortar complete including all quoins, arches, pillar etc complete all as specified.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan to any radius in half brick thick wall built in cement mortar (1 : 4) etc complete all as specified.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc complete all as specified.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 4) etc complete all as specified.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

S&F Sink made of stainless steel 1 mm thick Kitchen or Laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe overall size 495mm x 420mm bowl size 410mm x 330 mmx160mm complete with waste coupling & PVC waste pipe complete all as specified.

S&F Sink made of stainless steel 1 mm thick Kitchen or Laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe overall size 680mm x 535mm x 225mm bowl size 610mm x 460 mm x225mm complete with waste coupling & PVC waste pipe complete all as specified.

S&F in repair vitreous china squatting pan “ORISSA” pattern size 580mm X 440mm, white with PVC (SWR) S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified. Make:- Cera, Cat Part No-S3010109 (COVYNA) or equivalent in list of makes.

S & F in repair 10 ltrs capacity PVC low level flushing cistern, ISI marked of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified.

S&F in repair CP brass angle cock 15mm dia complete all as specified. Make - ESSCO Cat Part No SQT -526KN or equivalent in list of makes.

S&F in repair CP brass bib cock long body 15mm bore complete all as specified. Make:- ESSCO Cat Part No SQT 512KN or equivalent in list of makes.

S&F in repairs 15mm dia bore CP Concealed stop cock with sliding flange Cat Part No - 514EKN Make:- ESSCO or equivalent in list of makes.

S&F in repairs PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut Cat Part No 323 Make : Prayag or equivalent in list of makes.

S&F in repair fancy type health foucet with 1 mtr tube easy flex tube in chrome Finish & wall hook Cat Part No ALE-ESS585 Make :- ESSCO or equivalent in list of makes.

S&F in repair fancy type soap dish chromium plated Cat Part No AEC 1131N Make:- ESSCO or equivalent in list of makes.

S&F in repair shower rose 125mm round shape single flow (ABS body chrome plated with gray face plate) with Rubit Cleaning system Cat Part No EOS-542A Make :- ESSCO or equivalent in list of makes.

S&F in repair Towel rail 600mm long, stainless steel Cat Part No AEC 1111N Make :- ESSCO or equivalent in list of makes.

S&F in repair PVC corrugated waste pipe 32mmx 800mm long Cat Part No 327 Make Prayag or equivalent in list of makes.

S&F in repair PVC corrugated waste pipe 40mmx 800mm long Cat Part No 328 Make Prayag or equivalent in list of makes.

S&F in repairs Stainless steel 102mm round Cat Part No FT-03 Make Prayag or equivalent in list of makes.

S&F in repairs Stainless steel 102mm round with hole Cat Part No FT-04 Make Prayag or equivalent in list of makes.

S&F PVC (SWR) Type-B floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement. Make:- Astral, Supreme, Finolex.

Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position.

S&F White rotational moulded polyethylene water storage tanks (white colour) with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltr incl making connection completed all as specified. Make:- Sintex Pure/Sheetal Suraksha Plus/ Vectus Safe

Disconnecting existing tanks, setting aside (or lowering if required) for repair or cleaning etc and hoisting if required reconnecting and refixing in position (cleaning repairing, etc measured separately)

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified.

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210 gms) etc complete .

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed for following size of pipe:- (a) 15mm dia bore

(b) 20mm dia bore

Fixing only old serviceable steel tubing and connection in new or old position (wall, ceiling floor etc) including necessary fittings & fixtures etc complete all as specified and directed for following size of pipe:- (a) 15mm dia bore

(b) 20mm dia bore

Supply and fixing galvanised mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed for the following sizes:- (a) 15mm dia bore

(b) 20mm dia bore

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth complete all as specified.

Taking down CI/PVC pipes 100/110 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

S&F PVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, fixed in wall complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. Make:- Astral, Supreme, Finolex.

S&F 110 mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint, fixed to wall etc complete

S&F 110 mm bore PVC (SWR) bend in any radius etc complete.

S&F PVC (SWR) Type-B bends, 75 mm any radius complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B junction single, 110 mm (Single T) equal or unequal complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B vent cowl 75 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B reducers 110 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.

S & F Single 'Y' Tee, 75 mm UPVC (SWR) Type B Make: Prayag, Supreme, Finolex.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from the site all as specified & directed.

S&F ERW box type steel window/Ventilator 1.25 mm thick Box type( Both shutters, wire gauze and glass shutter) (primer coated) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed and skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07.

S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

S&F pressed steel frame of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I including applying two coats of existing surface finishes of the building.

S&F pressed steel frame of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I including applying two coats of existing surface finishes of the building.

M&L PCC 1:3:6 type C1 as in for filling in pressed steel frame including necessary use and waste of form work etc complete all as specified and as directed

S & F 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge.

Material & labour 35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebeated and prepare to recive glass but dived into square with plain chamfered or rounded mitrd and rebeatedd sash bars stiles and rails as specifed in SSR Part-I Sec 8 clause 8.24 (a).

S&F 35 mm thick IInd class HW partly panelled & Partly gauged & skeleton shutters open rebated and prepared to receive glass/gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed

S & F 25mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge

S&F in repair Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification.

S & F in repair Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and as directed

S&F aluminum handles cast type anodized 100 mm size etc complete all as specified and as directed

S&F aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed

S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long etc complete all as specified and as directed.

S&F floor door Stopper (140mm overall length of cover plate )aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed

S&F in repair 225mm, ordinary rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed

S & F mild steel slliding door bolts, plate type, stove enamelled black with bright bolt not less thatn 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 250mm long etc complete all as specified and as directed

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified.

S & F butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete all as specified and as directed

M & L preparation of New steel surfaces of any description exc. 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer etc complete all as specified and as directed.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

Demolition of cement concrete (reinforced) in ground floor & pavings not exc 15 CM thickness below or above ground level ( reinforcement cut as required to facilitate demolition) etc complete all as specified and as directed

M&L precast cement concrete type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and sey in CM(1:4) etc complete.

M&L for Reinforcement concrete M-25 (20mm graded aggregates) Fins, fascias, loures, parapets and railing exc 60CM in height newels, balustrade and the like etc complete all as specified and as directed

Use and waste for form work to faces of walls , retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc; fair finished flat surfaces of concrete etc complete all as specified and as directed

Rendering 5 mm thick on concrete surface as in columns, RCC walls, fins etc in CM 1:4 finished even and smooth without using extra cement.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. all as specified and directed.

Ditto all as per item Srl no 89 here-in-before but 6 to 8 mm dia.

Demolition of cement concrete of any description and in any position and removing the rubbish from the work site out side defence permises.

Rendering 15mm thck in CM 1:3 or Plain Cement Concrete as in sunken floors without extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately)

M&L applying a coat of bituminous primer conforming to IS-3384 @ 0.5 Kg/ sqm on prepared surface of roof/sunken slab after drying of primer apply APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application and finally apply a coat of hot blown 82/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm of plaster surface.

M&L Cement concrete type E-2, 1:5:10 ( 40 mm graded agregate) in Sunkan filling and mass concrete complete all as specified and directed by Emgr-in-charge.

M&L 40 mm dia G I tubing heavy grade galvanised laid over floors as a spout pipe in sunken floors all as specified.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc.

Material and labour for rendering 05mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement.

Material and labour for rendering 15mm thick in CM (1:4) on brick surfaces or concrete surfaces finished even and smooth w/o using extra cement upto 4th floor of bldg inl nessary scafffolding, ladder or any type of T &P required at site.

Ditto all as per item No 98 but in CM (1:6) finished even and smooth w/o using extra cement.

M&L for repairing of concrete surfaces such as balconey, chajjas, upward or downward facias , column, Piller, ceiling and similar items with plain cement concret 1:2:4 type B-0 & rendering any thickiness in CM 1:3 without using extra cement finished even and fair complete all as specified and directed (Up to fourth storey bldg and including necssory formwork and scaffolding reduired as per site conditions also taking down or dismantiling as required at site).

M & L for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 2 to 3 mm thick and one coat of primer complete all as specified.

Material and labour for two coats white wash on new or old surfaces of wall including preparation of surfaces etc complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat alkali resistant priming paint etc complete all as specified and as directed

M&L Preparing new plastered surface, and applying two coat of white wash on ceiling all as specified.

Material and labour preparation of new/Old plastered surface and applying two Apex weather coat paint on wall etc. complete all as specified and directed.

M&L Preparing old plastered surface of ceiling and one coat of white wash complete all as specified and as directed

M&L preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by scraping, washing, rubbing down & stopping etc and applying two coats of oil emulsion distemper over a coat of wall putty complete all as specified and as directed

M&L preparing old decorated plastered or unplastered surfaces of wall, pilasters, cornices etc by washing rubbing down & stopping etc and applying one coat of cement base paint complete all as specified and as directed

S&F in repair 25mm outer dis power coated aluminium decorative drapery rod of thickness 2mm with stainless steel brackets near to ends with finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings) Note:- Sample approved by Engr-in-Charhe/ GE.

Supply and fixing in repair stainless steel plate rack of size 24"x30"x10" cat Part No P-330 Make Prayag or equivalent etc complete

Demolition of PCC in ground floor & pavings not exc 15 cm thickness below or above ground level etc complete.

Material and labour 75mm thick PCC 1:2:4 type C-1 using 40mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.

S&F powder coated anodised aluminium door shutters, thickness of powder coating not less than 50 micron, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. for fixing of glass / ACP insert complete all as specified

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. thickness of powder coating not less than 50 micron complete all as specified

S&F 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified.

S&F 5.50 mm thick sheet glass ordinary quality plain and glazing in squares, glazing with beads fixed with metal panel n.exc. 0.5 Sqm each pane complete all as specified.

S&F 5.50 mm thick sheet glass ordinary quality coloured/tinted/frosted and glazing in squares, glazing with beads fixed with metal panel n.exc. 0.5 Sqm each pane complete all as specified.

S&F Door closer hydraulically regulated, designation No. 1 aluminium extruded body Universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S&F Mortice lock, with brass body 4 lever vertical type, size 100 mm complete all as specified.

M&L pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

S&F continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified.

S & F hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length.

S&F aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

M&L for 50 mm magnetic catches with brass body and striking plate including letting in as fixed complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut screw and washer of mild steel bright finished complete all as specified.

Material and labour Vitrified Ceramic (Double charged) edge cut joint free coloured or printed any shade tile 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:4. Make : Somany, Kajaria, Varmora (Sample as approved & Kept in GE's sample room)

Description all as item No 127 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.

Rendering 10mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

S&F factory made 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. One side prelam in high gloss finish and other side plain18mm thick Celuka PVC ply for kitchen cabinet shutter and also manufactuer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.

S&F factory made 18mm (+0.7mm) thick celuka PVC ply of density 600Kg/cum manufacured by an ISO 900-2008 certified company. Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.

S&F factory made 5mm thick PVC of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 5mm thick PVC sheet paneling for back side (wall side) and also manufacurer's test report and test certificate is mandotary with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.

M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10Sqm on plan and n.exc 1.5m in depth and getting out any type of soil etc complete and all as specified and as directed

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm etc complete all as specified.

Removing excavated material in soil to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified etc complete all as specified.

Material and labour for plain cement concrete PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified

M&L DPC with 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded course aggregate with water proofing comound (WPC cost included) including necessary form work.

M&L Vitreous China, corner wash hand basin, flat back white of size 400mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC 32mm dia waste pipe, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified.

S&F Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” completed all as specified.

S&F 50 mm GI tubing medium grade with clamps and all fittings, fixed complete to wall and ceiling or laid in floors.

M&L HDPE Double wall corrugated pipe with 150mm (S4 ) with integral socket and necessary fittings,laid in trenches jointed complete all as specified and directed.

M&L mild steel flat & angle iron as in Man hole cover frame including ,drilling holes, welding etc and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed by Engineer-In-Charge.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of new surface , n.exc 10cm in width or girth complete all as directed by Engr-in-Charge

Cutting into existing manholes/Septic tanks for connecting new drains, making good to pipe and rendering,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified.

M&L soakage well exc, in any type of soil, foundation in PCC 1:3:6 wells of honey combed and solidin M-25 concrete, including intercepting chamber brick work in CM, RCC cover slab in M-25,filling with brick bats, complete of size 2.40 mtr dia x 3.0 mtr deep.(Drg No.CEPZ/C-TD/013/13 sheets No. 1/5 to 5/5)

Taking down carefully copper/alluminium point wiring (light,fan,sockets & power) complete including fittings such as switches, ceiling roses, pendants, regulators ,Isolator,MCBs etc and CI/pressed steel terminal switch boxes and making good disturbed surfaces of wall/floor to match the existing surfaces etc.

Taking down of unsv MCB DB SPN /TPN along with MCB's

M&L for point wiring with 1.5 sqmm (Nominal Area) FR-LS PVC insulated sheathed multistranded copper conductor, 1100 Volts grade through PVC conduit medium duty (ISI Marked) concealed with accessories such as bends, cross, elbow, tees etc. of suitable size including MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting Modular type switches, sockets, fan regulators etc modular top cover (ISI marked) including continuous earth wire FR-LS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper conductor multistarnded, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for the following (a) One light/fan point controlled by one, one way switch 6 Amp complete

(b) One 3 pin modular socket outlet 6 amp independent

(c) One 3 pin modular socket outlet 6 amp same board

(e) One bell/ buzzer point controlled by one, complete all as specified and directed.

Ditto all as per Srl item No 151 above but for one 2 way light point controlled by two 2 way switch

M & L for point wiring with 2.5 sqmm (Nominal Area) FR-LS PVC insulated sheathed multi stranded copper conductor, 1100 Volts grade for 3 Pin socket outlet 15 Amps on independent board through MS conduit medium duty (ISI Marked) concealed with accessories such as elbow, tees,internal & external bend etc. of suitable size including MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting Modular type switches with modular top cover including continuous earth wire FR-LS PVC insulated 2.5 Sq mm copper multi stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified.

M&L modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

S & F modular switch Polycarbonate material ISI marked two way 1 module, 10 Amps, 240 V Make:Indoasian or equivalent in Havells, Legrand.

M&L modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

M&L modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

M&L modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

M&L modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.

S & F modular Bell Push with indicator Polycarbonate material ISI marked 1 Module , 6 Amps, 240 V

Supply and fixing bell Ding Dong AC 230 volts Single Phase all as specified and directed.

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fix LED light fitting 1 X 20 Watt, 230V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified

Supply and fixing lamp holder, Polycarbonate type with back plate suitable for batten fittings with LED bulb 9 Watt all as specified and as directed.

S&F sheet metal enclosure for MCB's DBs single pole & neutral 240V AC with 200 Amp rated neutal bus bar suitable for 8 ways outgoing MCBs with IP - 42 protection complete all as specified & directed.

S&F MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.

S&F MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series,ISI Marked complete all as specified and directed.

S&F sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified and directed.

Supply and fixing Exhaust fan 300 mm sweep, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900/950 rpm complete with louvers for wall mounting incl grouting,making hole in the wall and holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl cutting of hole of required size for fixing of the exhaust fan complete all as specified and directed .

S&F Vertical Distribution Board (TP&N) 4 way double door suitable for MCCB 3/4 pole of cap upto 63 Amp as incomer and out going MCBs SP and should be IP 43 protected with Copper Bus Bars, Neutral Links, Earthing bar all as specified and directed.

S&F MCB 4 pole complete 63 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected ot galvanised iron wire 4 mm dia earth lead by means of bolt, nuts, washers of galvanised iron or steel, earth strip protected by and including GI pipe 20 mm dia bore (light grade) and connected to main test point as directed including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:1½:3) type A-1 cover slab of size 54 x 54 x 5 cm reinforced with 8mm dia TMT bars @ 150 mm C/C both ways with one handle for lifting, made out of 8mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20mm bore GI pipe (medium grade) for watering, charcoal and salt in alternate layers, including necessary excavation and earth work in any type of soil complete all as shown on electrical plate No 3 of SSR Part-I and testing complete all as specified and as directed.

Taking down of fan ceiling cable and dismantling blades and depositing Fan and blades in safe custody of user or MES store yard of AGE E/M.

Supply and fixing of Ceiling Fan Complete with Blades downrods (as per site requirement) electronic regulator and acessories 230 V 1200 mm Sweep minimum air delivery 210 (CFM) with service value 6.00 BEE 5 Star rated with brushless direct current Motor (BLDC)

S&F of complete energy saving new generation 10W LED IP65 bulk head luminary with opal Each diffuser complete all as specified and directed incl LED 10watt.

Dismantling of the Geyser and keeping safely aside and refixing of the geyser after repair of the Qtr with suitable size nuts, bolts complete incl connection along with heavy duty PVC connection 15mm bore including brass nuts, washers complete on both ends as specified and directed.

Supply and fixing storage type geyser of capacity 25 ltr 220 volt single phase AC supply, in metallic body five star rated energy efficient including grouting on bolts/studs in wall and making good all as specified and directed by Engr-in-charge. Make : Crompton Solarium Neo 25-L or equivalent in Havells / Bajaj / Venus / Recold / Jaquar

Supply, installation, commossioning Split unit air Conditioner invertor technology Hot and cold type , electric driven single phase having capacity 1.5 Ton having BEE 3 Star rated including suitable size of copper pipe complete as directed by Engr-in-Charge . Make : Voltas / LG / BLUE STAR / VIDEOCON / SAMSUNG / GODREJ

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F Steel tubing galvanized (light grade) 40 mm bore conforming to IS-1239 for passing cable under road/floor or fixing to poles for protection of under ground cable complete with Flat iron 50x6mm clamps made to shape and 12mm dia bolts, nuts and washers for fixing where required complete all as directed by Engr-in-Charge.

Supply, laying and testing cable XLPE PVC insulated,screened, PVC bedded galvanised steel strip or wire armoured electric power cable ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core.

Supply and spreading sand Dry cushioning to cable providing with a layer of sand 8cm deep before laying the cable and 15cm deep after laying and stretching the cable in trenches complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid.

Supply and fix Electronic Meter with digital display with temper proof cover single phase 10-60 Amp including necessary electric connection in existing circuit all as specified and directed. Make: L&T Cat No. WM101BC5DL0 or its equivalent in HPL/ Secure

Dismantling and taking down from its position ACSR Conductor after disconnecting over head line and taking shut down as directed by Engr-in-Charge.

Dismentling insulator any type, any size as directed by Engr-in-Charge.

Supply, installation, testing & commissioning of totally enclosed feeder pillar outdoor type fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powder coated double door type (independent cabin including locking arrangement for each MCCBs, bus bar chamber enclosed complete suitable for operating on 415 Volt 50 Hz AC supply internally wired with copper conductor having legs 90 cms made out of 50x50x6 mm angle iron grouted on brick masonary platform upto 45 cms. Brick masonary platform should be 60 cms above the Ground Level. Comprising the following:- Note:- (i) The panel shall be front operated with cable entry from the bottom with cable glands. Earth bus shall be part of the main feeder pillar. (ii) Fabrication of feeder pillar box to be approved by CPRI width of the panel not less than 75 cms. (iii) Cost for construction of platform for panel of brick masonary work in CM 1:6 with foundation PCC 1:4:8 type D-2 including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No Extra payment will be made. (iv) MCCB's should be connected with extensions terminals at both side (incoming and outgoing).

Supply, testing & installation of LED Street light 45W housing made of pressure die cast aluminium with toughened glass cover. Driver compartment should be seperate, top opening for ease of maintenance. The product should operate on 120V - 270V. Driver should be BIS approved potted incapsulated in metal case inside the driver compartment.THD<10%, Power factor ≥0.95, CRI (RA)>70, CCT 5700K ± 355K. LED chip should be high power >1W, LED driving wattage 1W-3W with PC modular lens pasted and bolted on MCPCB. System Lumen efficacy should not be ≥120 Lm/W. Driver must comply 4 kV internal surge protection and 10 KV external surge protection must be provided.The driver should withstand 440V (Line to Line - 4 hrs & Line to Neutral - 8 hrs). The product should be protected from short circuit, reverse polarity, over voltage & IR protection 1.5 KV. The product should be protected from environment IP66 & IK08. Make : Jaquar Cat Part No LSRTT045XC and equivalent in Phillips/OSRAM.

Material and labour street light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including MS clamps made out of 40mmX6mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size all as directed incl taking down of old unsv bkt.

Supply and fixing multi core round PVC insulated copper conductor (flexible) industrial cables PVC sheathed cables, 1100 volts conforming to IS : 694 of size 1.5 Sqmm, single core two run from junction box /overhead conductor to street light inside/outside pole complete all as specified.

S & F Pole mounted junction box of size 250 x 200 x 105 mm outdoor type fixed with Aluminium Strip of Size 20 x 3mm - 2 No and 6 amp MCB SP complete incl fixing arrangements with suitable size clamps, nut & bolts for fixing on pole all as specified and directed. Make Syntex Cat part No GS-JB-1414 and equivalent make of Hansel/Anchor

Supply, laying and testing underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured confirming to IS-7098 Part-I (1988) with latest ammendments of sizes:- (a) 6 sqmm 2 core

(b) 16 sqm 2 core

(c) 25 Sqmm 3.5 core

(d) 50 Sqmm x 3.5 core

(e) 70 Sqmm x 3.5 core

Supply, installation ,commissioning of metal top deep freezer capacity 320 ltr, single phase 240 volt, 50 Hz. Complete all as directed by Engr-in-charge. Make : BLUE STAR, VOLTAS, SHRI RAM (USHA)

Voltage stabilizer for automatic operation,copper wound single phase naturally air cooled indoor type & designed for input variation between 90 V to 260 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA including with 5 Amp 3 Pin top and necessary electrical connection as directed by Engr-in-Charge. Make : POWERWARE, SINETRAC, VOLINA, MICROTECH, AAR KEY, VINITEC

S&F sub main wiring with two single core PVC insulated,unsheathed, stranded copper conductor cable 4.0 Sqmm with 4.0 Sqmm PVC insulated, unsheathed, stranded copper conductor cable as earth wire in and including rigid PVC conduit 20mm dia or higher, medium grade ISI marked and earth wire connected to common earth point all as specified & directed.

S&F socket residual current device (SRCD) DBOXx in steel enclosure with MCB SPN 16 Amp and plug top 15/16 Amp Cat No: DHDDCDP025201603 make Havells or its equivalent in C&S, Hegar all as specified and directed.

Supply & Errecting truelly vertical position steel tubular swaged poles with CI base plate, finial taper plug bolts, nuts & screws 9.0 mtr long type 410 SP-31 including painting of poles with 2 coats of approved aluminium paint over a coat of red oxide, making five strips of black and white paint from PCC of size 30cm thick, numbering of pole with black or white colour by means of stencils all as specified and directed by Engg-in-Charge.

S&F LED 35 Watt decorative post top lantern for 360 degree indirect light, made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection resistance to impact and corrosion glare free and better uniformity including fixing arengenment all as directed and specified. Make : Wipro/Philips/Osram.

S&F 3x1 Sqmm PVC circular copper cable for connection of street light fitting security light fitting and post top lantern fitting with conduit pipe 20mm dia fixing on pole by clamp and nuts bolts washer etc including all accessories for fixing all as directed by Engr-in-Charge.

Supply & laying or fixing or passing through pipe 1100 volts grade heavy duty cable with XLPE insulated aluminium mult strand conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall XLPE sheathing 6 Sqmm 2 Core nominal cross section complete all as directed by Engr-in-Charge.

Supply and fixing of PVC body Exhaust Fans 200 mm sweep, single phase AC 220/240V, with energy efficient motor, pre lubricant double ball bearing, speed 900 RPM, white colour complete louvers for wall mounted incl grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan along with plastering, finishing, painting and making good disturbed surface complete all as specified and directed by Engr-in-charge. Make : Bajaj model No : Maxima DXL 200 mm or equivalent in list of make.

M/S RAJ ENGINEERS

CELMAC REGD

M/S Shesh Paul Gupta

MOHINDRA ENTERPRISES

M/S PARAMJEET SINGH