Repair/renovation of VIP-4 by way of outdoor tiling and internal panelling, structural steel work along with face lifting of the building (Ved mandir enclave, Jammu). CNo-348 NP

P/F 0.5 HP pressure pump with all fittings complete job.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

PROVIDING AND FIXING MS WIRE MESH OF 2MM DIA WIRE AND 1"X1" SQUARE FENCING, WELDED TO FRAME WORK INCLUDING PRIMING COAT OF STEEL PRIMER. COMPLETE JOB.

P/F 18 mm thick WPC board of standard make including all necessary screws and fixtures, cutting, wastage, taxes. Complete job.

Providing and fixing of water proof flush door 34mm thick with 1.00 mm thick laminate (green, century or equivalent)/ veener on both sides including lipping, painting/ polishing, hinges, tower bolts, door stopper, mortize lock (harrison, godrej or equivalent). Complete

Providing and laying 20 mm thick heavy duty, anti-skid, outdoor, vitrified paver tiles of size 600x600 mm laid on 20 mm thick bed of 1:4 cement mortar of approved brand as per directions of Engg. I/C.

Providing and fixing 8" Super heavy charcoal Paneling of superior make on levelled wall surface including all necessary screws, fixtres, metal clips, angle corner and adhesives of required shade and color as approved by Engg. In charge.

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.