Provn of allied infra for shifting and installation of transformers at various ASCON Nodes under GE N Bikaner

Amount

M&L for shifting of 11/0.433 KV 100 KVA transformer from Bikaner Military Station to ASCON Node at Bikaner including lifting, loading from Bikaner Military Station and transportation to ASCON Node at Bikaner, unloading, installation on 04 Pole structure at ASCON Node, commissioning & testing at site complete all as specified & as directed. Note : All T&P/Vehicle for shifting of transformer shall be arranged by the contractor and the cost thereof shall be deemed to be included in the unit rate quoted against this item.

M&L for shifting of 11/0.433 KV 63/100 KVA transformer from Bikaner Military Station to ASCON Node at Jamsar including lifting, loading from Bikaner Military Station and transportation to ASCON Node at Jamsar, unloading, installation on 04 Pole structure at ASCON Node, commissioning & testing at site complete all as specified & as directed. Note : All T&P/Vehicle for shifting of transformer shall be arranged by the contractor and the cost thereof shall be deemed to be included in the unit rate quoted against this item.

M&L for shifting of 11/0.433 KV 75 KVA transformer from Bikaner Military Station to ASCON Node at Lunkaransar including lifting, loading from Bikaner Military Station and transportation to ASCON Node at Lunkaransar, unloading, installation on 04 Pole structure at ASCON Node, commissioning & testing at site complete all as specified & as directed. Note : All T&P/Vehicle for shifting of transformer shall be arranged by the contractor and the cost thereof shall be deemed to be included in the unit rate quoted against this item.

M&L for shifting of 11/0.433 KV 63 KVA transformer from Bikaner Military Station to ASCON Node at Mahajan including lifting, loading from Bikaner Military Station and transportation to ASCON Node at Mahajan, unloading, installation on 04 Pole structure at ASCON Node, commissioning & testing at site complete all as specified & as directed. Note : All T&P/Vehicle for shifting of transformer shall be arranged by the contractor and the cost thereof shall be deemed to be included in the unit rate quoted against this item.

M&L for shifting of 11/0.433 KV 63 KVA transformer from Bikaner Military Station to ASCON Node at Lakhusar including lifting, loading from Bikaner Military Station and transportation to ASCON Node at Lakhusar, unloading, installation on 04 Pole structure at ASCON Node, commissioning & testing at site complete all as specified & as directed. Note : All T&P/Vehicle for shifting of transformer shall be arranged by the contractor and the cost thereof shall be deemed to be included in the unit rate quoted against this item.

M&L for shifting of 11/0.433 KV 63 KVA transformer from Bikaner Military Station to ASCON Node at Motigarh including lifting, loading from Bikaner Military Station and transportation to ASCON Node at Motigarh, unloading, installation on 04 Pole structure at ASCON Node, commissioning & testing at site complete all as specified & as directed. Note : All T&P/Vehicle for shifting of transformer shall be arranged by the contractor and the cost thereof shall be deemed to be included in the unit rate quoted against this item.

M&L for shifting of 11/0.433 KV 63 KVA transformer from Bikaner Military Station to ASCON Node at Bajju including lifting, loading from Bikaner Military Station and transportation to ASCON Node at Bajju, unloading, installation on 04 Pole structure at ASCON Node, commissioning & testing at site complete all as specified & as directed. Note : All T&P/Vehicle for shifting of transformer shall be arranged by the contractor and the cost thereof shall be deemed to be included in the unit rate quoted against this item.

S&F Switch air break, gang operated outdoor, Horizontal operated type, HT 11 KV, Triple pole, 200 Amps, 3 insulator per phase, tilting/rocking horizontal type, with fixed contacts of phosphorous bronze and moving contacts of copper, manually operated from ground level with operating mechanism including GI tubing medium grade 25mm bore operating rod, pad locking arrangements, MS arcing horns, flexible braiding earthing blades, rod and contacts without drop out fuse assembly and jumpers with Mink conductor line, taps, clamps, colour coated HT sleeves and fittings suitable for horizontal mounting, complete all as specified and as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

S&F Switch air break, gang operated outdoor, Vertical operated type, HT 11 KV, Triple pole, 200 Amps, 3 insulator per phase, rotating vertical type, with fixed contacts of phosphorous bronze and moving contacts of copper, manually operated from ground level with operating mechanism including GI tubing medium grade 25mm bore operating rod, pad locking arrangements, MS arcing horns, flexible braiding earthing blades, rod and contacts without drop out fuse assembly and jumpers with Mink conductor line, taps, clamps, colour coated HT sleeves and fittings suitable for vertical mounting, complete all as specified and as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

S&F Drop out expulsion fuse assembly with fuse carrier, triple pole, HT 11000 Volts, 200 Amps, outdoor type (having two Nos post insulator mounted on MS channel for each pole) and jumpers with conductors line taps, clamps, colour coated HT sleeves and fitting, complete all as specified and as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

S&F Lightning arresters HT 11 KV 65 kilo Amp Non linear expulsion type transmission class with standard fittings confirming to IS-3070 (Part-I) 1985, complete all as specified & as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

Supply and fixing steel tubular pole, swaged type, 11 metre long, type 410 SP-55, with mild steel base plate, finial taper plug, bolts, nuts & screws including drilling of necessary holes, with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.5 metre height from PCC coping and applying two coats of aluminium paint over a coat of aluminium red oxide primer to remaining portion of pole and marking pole number in letters & figures of size not less than 10cm height complete all as specified & as directed at the following locations :- Note :- Excavation, earthwork, PCC in foundation & coping shall be measured and paid for separately.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

M&L for Earthing to Transformer / GOD switch / equipments / panels etc with & including galvanised mild steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized iron earth wire 4 mm dia as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted to earth plate at one end and other end of earth wire connected to transformer / GOD / Panel / equipment body / test point, GI earth wire encased in and including 15mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed at the following locations :- Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

M&L for Earthing to Transformer / GOD switch / equipments / panels etc with & including galvanised mild steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized mild steel strip 32x6 mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and other end of strip connected to transformer / GOD / Panel / equipment body / test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed at the following locations :- Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

All as per serial item No. 15 here-in-before but depth exc 1.5m and not exc 3m at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

M&L for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation of poles, filling, mass concrete and similar works, complete all as specified and as directed at the following locations :- Note : Volume of pole/strut embedded in concrete shall be deducted for the purpose of payment.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundation of stay assembly, filling, mass concrete and similar works, complete all as specified and as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

M&L for cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in copings, pedestal of poles and the like including use and waste of form work (straight or curved), all exposed surface of concrete finished even & smooth without using extra cement, complete all as specified & as directed at the following locations :- Note : Volume of pole/strut embedded in concrete shall be deducted for the purpose of payment.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

S&F Stay assembly complete with 20mm dia, 2000mm long GI stay rod, with threaded ends and GI nuts, two number thimbles, MS galvanized clamps made out of 50mmx6mm flat iron including MS galvanized nuts, bolts and washers, 300mm x 300mm x 6mm MS galvanized stay plate, stay bow, galvanized stay strand 7/4 mm including shackle insulator, loop insulator and stay clamp, with & including painting of exposed MS work with two coats of aluminium paint over a coat of red oxide zinc chromate primer, all as shown in electrical plate No 1 of MES Schedule Part-I, complete all as specified and as directed at the following locations :- Note : Excavation & earthwork and PCC shall be measured & paid for separately under respective items of this Schedule.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

S&F cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections conforming to Grade E-165 (Fe 290) including nuts, bolts, washers, welding, bending cold or hot, drilled holes for bolts, in any shape or size with & including two coats of aluminium paint over a coat of aluminium red oxide primer, complete all as specified & as directed at the following locations :- Notes :- (i) Size, section and shape of steel sections shall be as directed. (ii) Weight of paint shall not be considered for payment purpose and quoted rate shall deemed to be included this aspect.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

S&F Aluminium Conductor Steel Reinforced (ACSR) of any size as directed, stringing for overhead line on HT poles including jointing with and including aluminium binding wire 2 mm dia, jumpers, line tapes, conducting jelly, etc and stretching properly complete all as specified and as directed at the following locations :- Notes : (i) The ACSR conductors shall conforming to IS-398 (Part-II) and as specified in SSR Part-I. (ii) The unit rate quoted shall also deemed to include for supply and fixing of binding wire, aluminium tapes, etc which shall not be included in the weight of conductors for payment. (iii) Weight of conductors shall be determined by measuring the horizontal distance between centers of two adjacent poles and compounding the weight of conductors of that size and length and 3% extra shall be added for sag, jointing, jumpers etc. (iv) Weight of the conductors shall be calculated from the nominal weights given in tables in the relevant IS code.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 50 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & as directed at the following locations :- Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 70 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & as directed at the following locations :- Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

M&L for dry sand (Local Tibba sand) and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed at the following locations :- Note : (i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used. (ii) For the purpose of payment, only punned thickness shall be measured.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

Supplying and laying factory made, un-reinforced precast concrete ISI marked (IS:5820) cable cover, Class LV, Type 1, flat, size 250mm x 150mm x 40mm for cable protection, complete all as specified & as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

M&L for Galvanized iron tubing, 100mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete all as specified & as directed at the following locations :- Note :- Excavation & earthwork shall be measured & paid for separately.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

M&L for Boring of holes under road, pavement, hard standing, etc by using necessary machine suitable for passing the GI protection pipe / cables of 110mm outer dia complete all as specified and as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

M&L for cable route indicator made of Jodhpur stone of size 90cm x 20cm x 20cm all finished surfaces with "LT" lettering size 6cm x 6cm engraved on two sides of the stone complete all as specified and as directed at the following locations :- Note : PCC and earth work for fixing cable route indicator shall be measured & paid for separately.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

Notes for serial item No. 32 :- (i) Vertical height of legs of LT panel base frame shall be not less than 45cm from top of nearest road level / PCC floor finish. Legs shall be grouted in PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate). (ii) The contractor shall produce and get the detailed drawings of LT Panel approved from GE before fabrication and placing the order to the approved manufacturer. (iii) The quoted rate shall deemed to include supply & provision of built in flush type locks (with 02 keys) of superior quality as directed by Engineer in Charge. (iv) MS frame work shall be painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide primer. (v) Cost of MS frame work, painting, platform, MCCB spreaders, cable glands, locking arrangement with lock and key and any minor addition/alteration where required at site (the decision of GE will be final and binding regarding extent to which the change can be considered as minor addition/alteration) shall be deemed to be included in the quoted rates.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

Supply, installing, commissioning and testing of outdoor type micro processor based automatic power factor control unit having aggregate capacity of 21 KVAR capacitor bank distributed in step of 5 stages (i.e. 10 KVAR – 01 No, 5 KVAR – 01 No, 3 KVAR – 1 No, 2 KVAR – 01 No & 1 KVAR – 01 No) with each stage having auto switching system in the form of electromagnetic making/breading of contactors as per the varying load sensed by micro processor. The EM switching system used for energizing each capacitor stage shall have the current carrying capacity of not less than 1.5 times the charging current of the respective stage and each switching carry a back up protection of triple pole MCB ‘C’ curve of rating not less than 2 times the charging current of the individual stage. Each switching stage provided with ON/OFF LED type AC indicator system, provided with automatic/manual mode controlled by actuators provided on the panel for each switching stage. The entire system shall be enclosed in the cubical panel of size not less than 1.00 mtr height, 1.00 mtr wide and 0.45 mtr depth, made out of 3.15mm thick CRCA MS sheet, factory assembled, weather/vermin proof with proper ventilation with exhaust fan for naturally cooling system, having front & back openable shutters with locking arrangement, powder coated of approved shade, with & including TPN copper bus bar of current carrying capacity not less than 300 Amps, mounted on DMC/Epoxy insulators. The rating of the incomer MCCB TPN shall not less than 63 Amps 440 Volts, 25 KA, the cumulative current of the system as one unit micro processor based automatic power factor control system, programmable at site, capable of detecting wrong current transformer connection with the following specifications :- (a) Suitable for programming at site with programmable switching pattern. (b) Over voltage trip point +/- 10% (c) Self adjusting switching sequence. (d) PF adjusting range of 0.80 lags to 0.80 leads with digital setting keys. (e) Auto calculation of C/K value. (f) Voltage 440 Volts +/- 15% with 50 Hz frequency (g) Consisting of MPP type capacitor heavy duty type, at the following locations :- Notes : (i) Drawing of micro processor based automatic power factor control unit/system shall be got approved well in advance from GE before procurement. (ii) PCC and brick work for installation of panel board on floor or fixing on pole as directed shall be included in the unit rate.

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

S&F Disc type insulator, porcelain, vitreous, 145mm high and 255mm dia ball and socket type, white, brown or green, single disc assembly for tension with tension clamps for conductors, working pressure 11000 Volts, complete all as specified & as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

S&F Pin type insulator, porcelain, vitreous, white, brown or green for working pressure 11000 Volts, 150mm height and 150mm dia including galvanized mild steel spindle, two Nos GI washers, one No GI nut, complete all as specified & as directed at the following locations :-

ASCON Node at Bikaner

ASCON Node at Jamsar

ASCON Node at Lunkaransar

ASCON Node at Mahajan

ASCON Node at Lakhusar

ASCON Node at Motigarh

ASCON Node at Bajju

BIDAWAT ENTERPRISES

RAJENDER ENTERPRISES

ROSHAN LAL AHUJA

ALPHA ENGINEERING COMPANY

M/s Chopra Associates

Electromech Engineers