SPECIAL REPAIRS/REPLACEMENT /MAINT OF EXT ELECTRIC SERVICES SUCH AS ,SWITCH GEARS,FEEDER BOXES, STREETLIGHTS AND OH CONDUCTORS,UG CABLES AND VARIOUS E/M INSTALLATIONS UNDER THE AOR OF GE DEOLALI

Amount

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc. 1.5 mtr in wide and exc. 1.5 mtr but n. exc 3.0 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed

Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand , filling in trenches around under ground cable complete all as specified and directed. (Note : Thickness after punning down shalle be measured and paid separately).

Supply and lay un-reinforced precast concrete cable cover class LV type-I, flat of size 250 mm x 150 mm x 40 mm complete all as specified.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

Supply, Laying , jointing and testing in replacement LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culve (Note: Excavation and GI Tubing earthwork shall be measured and paid seperately under respective item of Sch 'A'.)

(a) 6 Sqmm 2 Core

(b) 10 Sqmm 2 Core

(c) 10 Sqmm 4 Core

(d) 16 Sqmm 4 Core

(e) 25 Sqmm 4 Core

(f) 35 Sqmm 3.5 Core

(g) 50 Sqmm 3.5 Core

(h) 70 Sqmm 3.5 Core

(j) 95 Sqmm 3.5 Core

(k) 120 Sqmm 3.5 Core

Supplying, install and errect in true vertical position steel tubular swaged welded pole complete with cast iron/MS base plate 6mm thick and of size 300x300mm, final taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW M.S. tubing conforming to IS-2713 part-II type 410 SP-55 (11.0 metre long) HT including of holes of reqd Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal red colour bends at lower portion of exposed pole starting from plinth block , each band of 300mm height at 300mm spacing, painting pole No the black paint by stenciled letters/figures of 8cm height complete all as specified and directed . (Note: Excavation and PCC works will be measured and paid separatly in respected items.)

Material and labour for stay assembly comprising of 20 mm dia galvanised steel stay rod 1800 mm long MS galvanised stay plate 6 mm thick of size230 x 230 mm stay bow including loop insulator porcelain vitreous of 90 x 140 mm clearance hole 25 mm complete all as specified and shown in EP No. 1 of SSR Part I 2009.

Supply and fix galvanised stranded stay wire for stay to pole, stranded size 7/4 mm fixed complete all as specified and shown in EP No. 1 SSR Part I of 2009.

Supply,installation, testing and commissioning new LT feeder piller box " CPRI Approved" cubicle type,with angle & frame, free standing, floor mounted, outdoor, weather proof type, pedstal mounted feeder Pillar working on 440V 3-phase, 50 Hz, AC supply with and 4 Nos stepped aluminum bus bars for looping & branch connection system , weather proof, dust-proof and vermin proof with canopy on top, 3mm thick CRCA sheet steel enclosure, painted as per the 7-tank process and painted for outdoor, weather proof IP-55 protection installation, the bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust proof .bus bar chamber shall be provided with better ventilation facility in the form of louvers for better heat dissipation as per specification with and including the following components complete all as specified and as directed:-

S&F tubing 'light grade' galvanised iron with all fittings and fixed to poles, walls etc. with flat iron clamps/bolts/nuts/washers or laid in floors/under roads complete all as specified and directed of the following bores :- Note: Excavation and GI Tubing earthwork shall be measured and paid seperately under respective item of Sch 'A'.

(a) 80 mm bore

(b) 50 mm bore

(C) 40 mm bore

Cutting through existing bituminous road /PCC/floor/approx size width 50cm X 60cm depth along length 3 mtr to 6 mtr cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finish complete all as specified.

M&L for cement concrete 1 : 4 : 8 type D-2 using 40 mm graded stone aggregate as in foundation for pole including necessary form work all as specified and directed

M & L for cement concrete 1 :3 :6 type C-1 using 20 mm graded stone aggregate incl as in coping necessary form work all as specified.

M&L for cement concrete 1 : 2 : 4 type B-1 using 20 mm graded stone aggregate as in foundation ,filling and mass concrete necessary form work all as specified and directed.

M&L in replacement of unservicable MCCB of 4 pole 160 Amps adjustable type, 415 Volts, with breking capacity 36 KA complete all as specified and directed .Make: Legrand / L&T/ Seimens

M&L for earthing GI Strip complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. Note: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.

M&L for galvanised iron ( GI ) strip 32 X 6 mm complete all as specified. NOTE: The unit rate includes earth strip in Per RM and work of connected earth point/test point .

M&L in replacement for fabrication of LT panel door covers made out MS Sheet 2mm thick necessary folding jointing as suitable at site with existing panel board indoor/outdoor including necessary welding, hinges, suitable sizes of bolts and supports complete all as specified and as directed. Note : Transport charges for electric/gas welding machine from workshop to site and back shall be included in the rate quoted.

M & L for painting to existing panel board of size 1.5 m x 1 m out door type complete ( inner and outer side) (By hand)with two coats of synthetic enemelled paint over a coat of red oxide primer after preparation of surfaces including scrapping of patcy paint surfaces of various location as per site requirement all as specified.

Supply,erection,testing and commissioning of outdoor type LT Bus bar Chamber box,platform mounted,suitable for 3 phase 4 wire,415V AC Supply and having 4 Nos steeped type 200Amps aluminium bus bar for looping & branch connection system .the chamber shall be painted with powder coated paint. the bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less then IP-55. The bus bar chamber shall be made out of 3.0mm thick CRCA mild steel sheet and 3.0mm thick gland plate,front door (01 layer) and rear door (01 layer) openi ng facility and 4 side slanting canopy type roof on top and angle iron pedastal frame 600mm high above the ground level.the bus bar chamber shall be provided with ventilation facility in the form of louvers for better heat dissipation

(Note f or item no. 23:- The bus bar chamber Box shall be designed in such a waybthat adequate workable space is made available inside the compartments and the size of the chamber shall not less than 600mm height (without base frame & canopy 600mm width and 500mm depth).

M&L for painting to steel tubular / swaged /RCC Pole 9mtr longof LT 1100V overhead lines with two coats of synthetic enamel paint over one coat of red oxide primer complete with including cross arm/clamps etc complete

M&L for painting to steel tubular swaged /RCC Pole of HT 1100V overhead lines(11 mtrs) complete with including cross arm/clamps etc complete (Note for item Num:-,24,25:-M&L Rates included for Each jobs.following works included in complete Each/One jobs.(a) Scraping out wornout old paint and making the surface smooth.(b) Bottom of the pole up to 1.5 meter from ground level to be painted with two coats of anti corrosive enamel paint(every 50cm block,alternate Black,yellow & block for LT and Black ,red & black for HT) & Writing the pole & feeder no all as directed at site.)

M&L For carrying old bricks retrived from item no 7 and laying in new location all as directed at site

Taking out existing any size and type underground cable carefully,carrying to the new location for re-laying,connecting and testing complete aluminium lugs,ferrules etc complete all as specified and directed at site. (Note:- Necessary earth work,sand and bricks will be measured and paid in recpective items)

Supply,installation, testing and commissioning new LT feeder piller box " CPRI Approved" cubicle type,with angle & frame, free standing, floor mounted, outdoor, weather proof type, pedstal mounted feeder Pillar working on 440V 3-phase, 50 Hz, AC supply with and 4 Nos stepped aluminum bus bars for looping & branch connection system , weather proof, dust-proof and vermin proof with canopy on top, 3mm thick CRCA sheet steel enclosure, painted as per the 7-tank process and painted for outdoor, weather proof IP-55 protection installation, the bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust proof .bus bar chamber shall be provided with better ventilation facility in the form of louvers for better heat dissipation as per specification with and including the following components complete all as specified and as directed:-

M&L for making underground boaring(Manually/Mech) through existing bituminous road/PCC/Floor along cross section of the road for laying of GI tubing for encasing of cable all as specified and directed at site.

M & L for bracket made out of GI tubing 40mm dia,light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50mm wide 5mm thick flat iron with M.S. nuts, bolts 75 mm long 12 mm dia -4 Nos & flat washer (3mm thick) 01 No. for each including preparation of steel surfaces and painting with two coats of aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed.

Supply & fix in repairs sintex box metal type of size 280mm X 170mm X 130 mm wiith 63 Amps MCB TP with the help of MS nuts ,bolts and MS clamps-1 No. of size 40mm X 5mm thick with one No. MCB SP 6 Amp capacity and work includes making suitable hole on existing pole to take out connections to fitting if required at site complete all as specified and as directed..

Taking down old Unserviciable time Switch and Supply & Fix Rex Surface mounting Time Switch as per Make: Legrand Cat pt No. 6499 14A Model : MaxiRex 4QTB ( Daily with IP 53 Box) with complete accessories all as specified and directed.

Taking down old Unserviciable Power Contactors and Supply & Fix Lexic Power Contactors 63 Amps Four Pole Surface mounting as per Make: Legrand Cat pt No. 4125 56 Model: Nominal rating-63A 4 No with complete accessories all as specified and directed.

S&F Endura Pearl plus of LED street light made of pressure die cast housing with toughhed glass and individual high power 70W 5700K LEDs with secondary opticals,IP66 protection and impact of IK07 Make:-Havells Cat pat :-L70W LED 757SASYTOPC, C.G ,Philips or equivalent approved by GE.

M&L for PVC cable 2 Core 1.5 Sqmm PVC Insulated with stranded copper conductor for connecting up the fitting

Note: Amount of sch of credit of Rs.60,045.00/-will be deducted from total amount of BOQ.

M/S S.N ENTERPRISES

M R ENTERPRISES

KOYNA ENGINEERS PVT LTD

sapana enterprises

M/s Harshal Traders