PROVN OF MODULAR KITCHEN AND RENOVATION OF TWO BATHROOMS AT P-03, HALDIGHATI LINE UNDER GE(S) JAIPUR AT MIL STN JAIPUR

M&L for cutting holes in brick walls exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. Note:- The depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or any horizontal portion and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face are covered with decorative face veneer with lipping / frame to match including preparation of surface with filler coat and one coat primer with two or more coat french polish till shining to the surface complete all as specified and directed.

S&F for solid Moulded PVC door frame of size 50 x 47 mm made out of 5 mm of approved colour PVC sheet , reinforced with MS square tube, complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed.

S&F second class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each and removing to or from store complete all as specified and directed.

S&F Factory made Solid PVC Moulded door shutter with particle board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 mm long complete all as specified and directed.