GE863/EWS-T-43 OF 2020-21

Amount

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work complete all as specified and directed.

-Ditto- all as per item above but in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section.

Dismantling of plain or corrugated steel sheeting, pre-painted galvalume aluminium zinc coated any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed.

Taking down Shutters of any description exc 2 sq. m each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and directed.

M&L for 12 mm thick rendering in cement mortar 1:6 on concrete block masonry finishing even and smooth without using extra cement complete all as specifed and as directed

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 using WPC 3% by weight of cement and finished surface even and smooth (without using extra cement) complete all as specified and directed. NOTE: - water proofing compound shall be measured and paid separately as 'supply only'.

Supply only integral water proofing compound of approved brand / make complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on concrete block masonry finishing even and smooth without using extra cement complete all as specifed and as directed

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, including rough finished without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, including rough finished without using extra cement complete all as specified and directed.

M& L for 50mm thick cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection finishing fair and even complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished without using extra cement complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles complete all as specified and directed.

M&L for Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular, polished, area of each tile not exceeding 0.36 Sqm in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 300 x 200 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10 mm thick cement mortar 1:4 backing coat complete all as specified and directed.

M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in cement mortar 1:6 as in floors with grey cement and pigment complete all as specified and directed.

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed complete all as specified and directed.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work as in ceiling, flat or sloping complete all as specified and directed.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work as in partitions/ shutters, wall etc complete all as specified and directed.

M & L for second class hardwood plain fillets, wrought, square, rectangular or triangular in section,secured with screws, cross sectional area exceeding 13.00 sqcm and not exceeding 25.00 sqcm complete all as specified and directed.

M & L for second class hardwood plain fillets, wrought, square, rectangular or triangular in section,secured with screws, cross sectional area exceeding 3.00 sqcm and not exceeding 6.00 sqcm complete all as specified and directed.

S & F for 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

-Ditto- all as per item above but except sheeting (any thickness).

S & F 0.63mm thick Plain Galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.

S & F for 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

-Ditto- all as per item above but except sheeting (any thickness).

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkat complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S & F 30 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S&F plain sheet glass/pin headded glass of 4 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as specified and directed.

M&L for cutting holes in stone walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 exceeding Half brick wall and not exceeding one brick wall complete all as specified and directed.

M & L for preparation surface of wood and wood based material and iron works, new or old, of any description and girth not otherwise described treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sqm but n exc 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed.

M & L for preparation surface of wood and wood based material and iron works, new or old, of any description and girth not otherwise described treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area tarred n exc 0.1 sqm and treated with tar or coal tar black paint complete all as specified and directed.

M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in Hold fast block complete all as specified and directed.

M & L MS work for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Aluminium barrel tower bolt of 100 mm long extruded section and fixed complete all as specified and directed.

S&F Aluminium barrel tower bolt of 75 mm long extruded section and fixed complete all as specified and directed.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of truded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 75 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S&F extruded Aluminium alloy handle fabricated type, anodised 125 mm long fixed with screw to shutter complete all as specified and directed.

S&F extruded Aluminium alloy handle fabricated type, anodised 75 mm long fixed with screw to shutter complete all as specified and directed.

S & F for Second class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and directed.

S & F for Second class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles exc 200 Cucm but n exc 500 Cucm each complete all as specified and directed.

S & F 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting primer as a preparatory to distempering complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of new or previously untreated wood and wood based surface of any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old painted steel surface of any description , over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 65145.00

Kusan Enterprises