Term contract for internal electrification and plumbing in SM BK QG Area at KLP Zokhawsang

Amount

Providing and fixing PTMT pillar cock of approved quality and colou .1 15 mm nominal bore, 107 mm long, weighing not less than 110 gms

G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal (supply)

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings (supply)

G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal (supply)

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings (supply)

Coupling/Socket fittings for 22.22 mm outer dia SS pipe (supply)

Coupling/Socket fittings for 28.58 mm outer dia SS pipe (supply)

Coupling/Socket fittings for 34.00 mm outer dia SS pipe (supply)

Coupling/Socket fittings for 42.70 mm outer dia SS pipe (supply)

Coupling/Socket fittings for 48.60 mm outer dia SS pipe

G.I. Union 32 mm nominal bore (supply)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre

H.P. or L.P. ball valve with polythene floats: 25 mm dia

Equal Tee for 54 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

PTMT - Waste Coupling 38/40 mm (supply)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

P.T.M.T. extension nipple 20 mm dia

P.T.M.T. extension nipple 25 mm dia

P.T.M.T. extension nipple 15 mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

Elbow 90° for 15 mm outer dia SS pipe of grade 316L as per IS 6911:2017 and conforming to EN-10312 standard

Insrtallation, testing , commissioning of celing fan, including wiring the down roads of standard length (upto 30 cm ) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular paltes etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular paltes etc. as required. 6 Pin 15/16 A socket outlet.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular paltes etc. as required. 5/6 A Switch.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular paltes etc. as required. 15/16 A Switch.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required upto 450 mm sweep.

3 Pin 5/6 amps socket outlet, piano type ISI marked. (supply)

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connection, testing and commissioning etc as required. 40 A

Supplying and fixing followign rating, double pole, 240 V, isolator in the existing MCB DB complete with connection testing and commissioning etc. as required 63 A.

25 Amp modular SPMCB, 'C' Curve. (supply)

Eatrhing thimbles and solder (supply)

GI nipple 50 mm (supply)

Angle Stop Cock with Flange 15mm (supply)

PVC 10 Litre (full flush) capacity controlled low level flushing cistern (supply)

Supplying of LED Ceiling light (supply)

Supplying of fan requlator (supply)

M - seal (supply)

ABDUL KADIR ENTERPRISE (BID ID -3233562)

Zosangzuala (BID ID -3234265)