Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC NA | ₹12.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹12.0 L+₹1,664.28 (0.14%)Rejected-AOC | ₹12.0 L+₹1,664.28 (0.14%) | L2 | Rejected-AOC L2 |
| 3 | L3₹12.0 L+₹4,433.32 (0.37%)Rejected-AOC | ₹12.0 L+₹4,433.32 (0.37%) | L3 | Rejected-AOC L3 |
| 4 | L4₹12.3 L+₹30,160.22 (2.52%)Rejected-AOC CHENAB VALLEY DIVISION HPPWD UDAIPUR | UDAIPUR | RAJASTHAN | 307025 | ₹12.3 L+₹30,160.22 (2.52%) | L4 | Rejected-AOC L4 |
| 5 | L5₹12.6 L+₹58,619.08 (4.90%)Rejected-AOC HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 172029 | ₹12.6 L+₹58,619.08 (4.90%) | L5 | Rejected-AOC L5 |
Tender Value
₹13.1 L
EMD Value
₹27,000
Closing Date
7 Jul 2023, 10:00 amClosed
EE Design
O/o Estate Organization, UHF Nauni, Solan
Providing chain link fencing with barbed wire in various blocks for the deptt. of Vegetable Science at Dr YSP University of Horticulture and Forestry Nauni, Solan.
2023_YSPU_75685_1
UHF/Const.-1/ Parttfile1/2023/909 dtd 30.06.2023
Open Tender
Civil Works
Item Rate
180 days
Nauni
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
EE Design
₹27,000
15 Jul 2023
30 Jun 2023
7 Jul 2023
30 Jun 2023
7 Jul 2023
30 Jun 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-incharge a)Ordinary rock.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level complete in all respect as per satisfaction of Engineer-in-Charge.
a)..1:3:6 (one Cement : three sand : six graded stone aggregate 20 mm (twenly milimetre) nominal size.
b). 1:5:10 (one Cement : five sand : ten graded stone aggregate 20 mm (twenly milimetre) nominal size
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in respect as per satisfaction of Engineer-in-Charge
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete in all respect as per satisfaction of Engineer-in-Charge.
Square / rectangular Hollow tube work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. complete in all respect as per satisfaction of Engineer-in-Charge a). In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as required complete in all respect as per satisfaction of Engineer-in-Charge.a) Two or more coats on new work.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm and 4mm dia including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with four horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. a). With G.I. barbed wire
Supplying, straining and fixing of 4mm plain mild steel galvanized wire to wood, concrete or steel standards and or to straining Boards including securing with galvanized iron type wire galvanized iron and staples or steel pins etc. complete in all respect as per satisfaction of Engineer-in-charge.
S3 Technology
rajneesh katna
RAJEEV KUMAR
Saddam Engineering
Manoj Kumar
shashikant
M/S A K HOSPITALITY SERVICES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .