Remodling of Water Ditribution system by Transmision lines, stoarges and distribution network for Waghoba Nagar of Kalwa Ward Committee Area of TMC

Amount

PART A (PIPE, SPECIALS & APPURTENANCES) Item No. 1 Providing D.I. K-9 grade pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the I.S. specifications inclusive cost of jointing materials (Rubber gasket of EPDM Quality) including all statutary duties and taxes levied by Gol and GoM in all respect, Education Cess, VAT, Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/ site of work, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/ 2001 for pipes and IS 158/ 1969 and IS 12820/ 1989 or latest edition/ revision with amendments for Rubber Gaskets. (IS: 8329-2000 Latest Version). 350 mm dia

500 mm dia

Item No. 2 Providing and supplying ISI standard D.I. specials and fitting with sealing rubber gasket of S.B.R,complete with cast iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of labour, materials, and transportation to stores/ site, loading and unloading including all taxes etc. complete as per IS- 9523. For all types of specials, bends, tees etc. a) 350mm & above dia

Item No. 3 Providing double flange sluice valve/ scour valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. PN-1.0 DI Sluice Valves 350 mm dia

500 mm dia

Item No. 4 Supplying lowering laying and fixing Double flanged, Ductile Iron, Diaphragm controlled Straight body type, Pilot operated, Rate of Flow Control Valve (RF). Functions: The Rate of Flow Control Valve accurately limits flow to a pre-set maximum by maintaining a continuous pressure differential across an orifice. The Valve will be supplied with Paddle style orifice. MOC : Body, Cover & Stem Cap in Ductile Iron ASTM A 536 65/45/12. Stem, Seat Ring, Spring of SS: 316. Diaphragm, Seals, O-Rings EPDM/Buna N. The Valve body will be straight type and not Y type. The SS: 316 Seat Rings shall be guaranted for life of the Valves for potable water use only. The Valve shall have removable Stem Cap for in line inspection and easy maintainence. The painting shall be NSF 61 fusion bonded epoxy coating safe for drinking water. All external fasteners shall be SS: 304. 300 mm dia

Item No. 5 Ultrasonic Insertion Fixed Type Flow Meter (Single Channel) Providing, Installing and giving satisfactory test & trial of ultrasonic insertion fixed typeflow meter working on conditions & specifications, calibration, inspection, testing, training, guarantee and manufactures test certificate/ declaration copy along with accessories as mentioned in a (1) to (16) below & with inbuilt assembly to fix the insertion type transducer on the pipeline.

Item No. 6 Level Transmitter: Designing, Supplying, installing, commissioning & testing of Ultrasonic level transmitter CE marked at each filter bed with following technical parameters interfacing with PLC panel. Medium- Water Range- 0-5 mtrs Output- 4-20 mA Power Supply- 24V DC ext. Display- Large LCD Accuracy- +/- 0.25% of Full Scale or better Temp- With inbuilt temp compensation Enclosure- IP 65

Item No. 7 Providing, erecting pressure gauge of required range complete with syphon tube, isolating cock suitable for 12mm dia G.I. pipe. Pressure gauge shall be installed as directed with tapping on rising main including M.S. Cage with locking arrangements for protection etc. complete.Glycerin Filled Pressure gauge Bourdon's type as IS 3624:1987 Mounting - direct bottom, stainless steel body, toughened glass window Pressure Gauge (150mm Dia)

PART- B (EXCAVATION AND OTHER LABOUR PART) Item No. 1 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling etc. complete.

Item No. 2 Excavation for foundation / pipe trenches by all means in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material up to a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding, backfilling,etc.complete.

Item No. 3 Excavation for foundation /pipe trenches in hard rock and concrete road by chiseling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and leveling the bed, removing the excavated material up to a distance of 50 M beyond area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, excluding, backfilling, etc.complete by all means. lift 0 M To 1.5 M

lift 1.5 M To 3.0 M

Item No. 4 Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging, etc. complete.

Item No. 5 Disposal of excavated stuff within 3 Km lead including all labours, loading and unloading and as directed by Engineer-in-charge.

Item No. 6 Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. 5 BHP pump

Item No. 7 Providing and filling in sand boxing in pipeline or for foundation with sand of approved quality including watering compaction, initial lead upto 5.0 km. etc. complete.

Item No. 8 Cutting and chamfering of pipes of following diameters including cost of all materials and labour involved, etc. complete as directed by Engineer-in-charge (for all class of pipes). 350 mm dia

Item No. 9 Lowering laying and jointing with SBR rubber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete. Note: Only SBR Rubber gaskets to be used as per IS- 5382 and IS- 12820 k-9 class 350 mm dia

500 mm dia

Item No. 10 Lowering, laying and jointing in position following C.I.D/F. reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) 350 mm dia

500 mm dia

Item No. 11 Providing and laying in situ, following grades of C.C. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, formwork, compacting and curing, finishing, etc. complete. M15 for PCC

Item No. 12 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast S.F.R.C. frame and cover, etc. complete as directed by Engineer-in-charge. Valve chamber with precast steel fiber reinforced concrete (SFRC) frame and covers 1.2 X 1.2 M internal size and depth up to 1.5m

Item No. 13 Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the length up to 1 km, using reciprocating type pumps which should be able to provide specified test pressure gauges, and other equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary.

Item No. 14 Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, plywood form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (excluding M.S. or Tor reinforcement) RCC M 200 grade

Item No. 15 Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete.(Including cost of binding wire).

Road reinstatement of BT roads as per given specifications and Rate analysis attached alonwith etc. complete

2 STORAGE SYSTEM SYSTEM FOR WAGHOBA NAGAR Item No. 1 Designing (aesthetically), and constructing RCC ground service Reservoirs/ RCC sumps in M-300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab/ or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./M.S. D/F. pipes specials and valves of given diameters, providing and fixing accessories such as Stainless Steel ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. Anti termite treatment shall be given for underground portion of the structure. 2.00 ML for Waghoba Nagar GSR

Item No. 2 Manufacturing, providing and supplying spirally welded/ERW/SAW/ fabricated M.S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, track welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming 'V' edge on both ends of pipes including all taxes (Central & local), railway freight, insurance unloading from railway wagon, loading into truck, transport to stores/ site, unloading, stacking, etc, complete as per IS- 3589 and IS- 5504 as applicable as per specifications (No negative tolerance in thickness is permissible). Inlet Pipe / Outlet / Washout / Overflow - 200 mm dia (8mm thk)

300 mm dia (8mm thk)

350 mm dia (8mm thk)

Item No. 3 Providing and supplying ISI standard M.S. specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores/ site, and stacking, etc. complete.

Item No. 4 Supplying lowering laying and fixing Double flanged, Ductile Iron, Diaphragm controlled Straight body type, Pilot operated, Rate of Flow Control Valve (RF). Functions: The Rate of Flow Control Valve accurately limits flow to a pre-set maximum by maintaining a continuous pressure differential across an orifice. The Valve will be supplied with Paddle style orifice. MOC : Body, Cover & Stem Cap in Ductile Iron ASTM A 536 65/45/12. Stem, Seat Ring, Spring of SS: 316. Diaphragm, Seals, O-Rings EPDM/Buna N. The Valve body will be straight type and not Y type. The SS: 316 Seat Rings shall be guaranted for life of the Valves for potable water use only. The Valve shall have removable Stem Cap for in line inspection and easy maintainence. The painting shall be NSF 61 fusion bonded epoxy coating safe for drinking water. All external fasteners shall be SS: 304. 200 mm dia

300 mm dia

350 mm dia

Item No. 5 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast S.F.R.C. frame and cover, etc. complete as directed by Engineer-in-charge. Valve chamber with precast steel fiber reinforced concrete (SFRC) frame and covers. 1.2 X 1.2 M internal size and depth up to 1.5m

Item No. 6 Providing & applying epoxy paint of approved make (Shalimar, Ciba, Mahindra and Mahindra) to concrete surface of RCC ESR or GSR or any other structure including cleaning the surface by scrapping and air blowers to the satisfaction of Engineer-in-charge, necessary scaffolding, etc complete with all leads & lifts and giving satisfactory hydraulic test for water tightness, film test as per I.S. codes. 1)For 8mm to 20mm dia.

SUBWORK: 3 DISTRIBUTION SYSTEM FOR WAGHOBA NAGAR PART A (PIPE, SPECIALS & APPURTENANCES) Item No. 1 Providing D.I. K-9 grade pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the I.S. specifications inclusive cost of jointing materials (Rubber gasket of EPDM Quality) including all statutary duties and taxes levied by Gol and GoM in all respect, Education Cess, VAT, Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/ site of work, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/ 2001 for pipes and IS 158/ 1969 and IS 12820/ 1989 or latest edition/ revision with amendments for Rubber Gaskets. (IS: 8329-2000 Latest Version). 100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

Item No. 2 Providing and supplying in standard lengths Polyethylene Pipes , confirming to I.S. 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint , including all statutory duties and taxes such as GST levied by GOI & GOM in all respect , transportation & freight charges , inspection charges , loading / unloading charges , conveyance to the departmental stores / site & stacking the same in closed shade duly protecting from sunrays & rains , etc. complete. HDPE (PE-100/ PN-6)

Item No. 3 Providing and supplying ISI standard D.I. specials and fitting with sealing rubber gasket of S.B.R,complete with cast iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of labour, materials, and transportation to stores/ site, loading and unloading including all taxes etc. complete as per IS- 9523. For all types of specials, bends, tees etc. a)80 to 300mm dia.

B) 350 mm dia & Above

Item No. 5 Providing double flange sluice valve/ scour valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. PN-1.0 150 mm dia

200 mm dia

250 mm dia

300 mm dia

Item No. 6 Providing, erecting pressure gauge of required range complete with syphon tube, isolating cock suitable for 12mm dia G.I. pipe. Pressure gauge shall be installed as directed with tapping on rising main including M.S. Cage with locking arrangements for protection etc. complete.Glycerin Filled Pressure gauge Bourdon's type as IS 3624:1987 Mounting - direct bottom, stainless steel body, toughened glass window Pressure Gauge (150mm Dia)

PART- B (LABOUR PART) Item No. 1 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling etc. complete.

Item No. 2 Excavation for foundation / pipe trenches by all means in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material up to a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding, backfilling, etc.complete.

Item No. 3 Excavation for foundation /pipe trenches in hard rock and concrete road by chiseling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and leveling the bed, removing the excavated material up to a distance of 50 M beyond area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, excluding, backfilling, etc.complete by all means. lift 0 M To 1.5 M

Item No. 4 Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging, etc. complete. Compaction should be at least 95% of M.D.D. Total excavation - (pipe volume + loose soil)

Item No. 5 Disposal of excavated stuff within 3 Km lead including all labours, loading and unloading and as directed by Engineer-in-charge.

Item No. 6 Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing of water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

Item No. 7 Providing and filling in sand boxing in pipeline or for foundation with sand of approved quality including watering compaction, initial lead up to 5.0 km. etc. complete.

Item No. 8 Cutting and chamfering of pipes of following diameters including cost of all materials and labour involved, etc. complete as directed by Engineer-in-charge (for all class of pipes). 150 mm dia

250 mm dia

300 mm dia

350 mm dia

Item No. 9 Lowering laying and jointing with SBR rubber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete. Note: Only SBR Rubber gaskets to be used as per IS- 5382 and IS- 12820 k-9 class 100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

Item No. 10 Lowering laying and Jointing HDPE pipes by heating to the ends of pipes with the help of tefflon coated disc & hot flame blower to the required temparature and then pressing the ends together against each other , to form a monolithic & leakproof joint by thermosetting process. The pressing may be required to be done with jig fixtures etc. complete. with all material labour as directed by Engineer-in-charge ,including giving satisfactory hydraulic test. HDPE (PE-100/ PN-6) 110 mm dia

Item No. 11 Lowering, laying and jointing in position following C.I.D/F. reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. (Rate for all class of valves.) 150 mm dia

250 mm dia

300 mm dia

350 mm dia

Item No. 12 Providing and laying in situ, following grades of C.C. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, formwork, compacting and curing, finishing, etc. complete. M 15 PCC

Item No. 13 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. Valve chamber with precast steel fibre reinforced concrete (SFRC) frame and cover 90 X 90 cm internal size and depth up to 1.2m

1.2 X 1.2 m internal size and depth up to 1.5m

Item No. 14 Providing structural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position making riveted/bolted/welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc complete.

Item No. 15 Hydraulic testing of D.I./HDPE pipeline to specified pressure cost of all materials and labour and water for testing for the length upto 1 km, using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary. 100 mm dia

150 mm dia

250 mm dia

300 mm dia

350 mm dia HDPE (PE -100/ PN-6)

110 mm Dia

Road reinstatement of BT roads as per given specifications and Rate analysis attached alonwith etc. complete (Rate Analysis Attached)

SUBWORK: 4 PUMPING SYSTEM FOR WAGHOBA AREA Item No. 1 Providing, erecting, commissioning and giving test and trial of Centrifugal Coupled Pumps of Horizzontal split casing type and capable of discharging Pure Water at the rategiven below at a total head as specified in mtrs. Operating at 1440 RPM. Including sole plate, required column assembly, discharging head, bowl, assembly, M.S. foundation frame etc. as per detailed specifications. (LF5015) Providing, erecting, commissioning and giving test and trial of foot mounted squirrel cage induction motor of 45 kw/1440 (synchronous) suitable for C/F pump mentioned above under Item No. 1 and as per detailed specifications. Motor should Not be less than 40 HP 390.20 -Cum/Hr - 32 MWC

332.73 -Cum/Hr - 43 MWC (Rate Quotation from Mather & Plat) 1. All pumps are horizontal split casing type, typical make as Mather & Platt 2. Being pure water pumping, MOC for all pumps is CI casing, Bronze impeller, SS 410 shaft and SS 410 sleeves 3. Motors are TEFC sq. cage induction motors with Cl. F insulation 4. Prices quoted are for pump & motor coupled on common baseframe using pin-bush coupling

Item No. 2 Providing, Lowering, Laying, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS- 210 Gr.CF 200 generally conforming in to IS- 13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing excluding C.C. foundation/ structural steel support. 300 mm dia

Item No. 3 Providing, erecting electric Valve actuators totally enclosed, weather-proof and dust proof construction with IP-67, rotection class suitable for installation in any position without lubrication, leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction motor working on 440 Volts +/- 10%, 3 phase, 50 Hz AC of intermittent duty rating S-2, insulation class "F" and temp rise restricted to class "B" with IP - 67 protection class suitable for DOL starting and with three thermostat and 30% over load margin.The torque rating of reduction gear box shall be atleast 1.5 times max. torque required for opening and closing of valves PN 1.0 (without Bypass) 300 mm dia

Item No. 4 Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I (1984) With Third Party Inspection Without by pass arrangement - PN -1 300 mm dia

Item No. 5 Providin, Lowering, laying & fixing in position and jointing high performance C. I. Air valves for water combination type ( Kinetic air valve along with automatic air valves) double ball, double orifice with stainless steel ball tamper proof air vents rolling seal mechanism for air release and anti vacuum application designed for 16 kg. per sq. cm. working pressure and tested for 20 kg per sq. cm. pressure (Rate to include cost of gaskets, bolt, nut and any other material required for jointing and its transportation etc. including all taxes and duties except octroi) 80mm dia

Item No. 6 Providing, errecting pressure gauge of requird range complete with syphon tube, isolating cock suitable for 12mm dia G.I. pipe. Pressure gauge shall be installed as directed with tapping on rising main including M.S. Cage with locking arrangements for protection etc. complete. Glyscerine Filled Pressure gauge Bourdon's type as IS 3624:1987 Mounting - direct bottom, stainless steel body, toughened glass window Pressure Gauge (150mm Dia)

Item No. 7 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores / site, and stacking, etc. complete. Double flanged specials of all diameters

Item No. 8 Providing, erecting, commissioning and testing M.S. fabricated dismentalling joints with required hardware as per detailed specification of size of following dia. Test pressure - 16 kg/cm2 300mm dia

Item No. 9 Providing RCC/PCC supports thrust blocks for pipes and valve including excavation in all types of strata, form work, curing, plastering, etc. complete as per detailed specifications. i) P.C.C. 1 : 2 : 4

Item No. 10 Providing , erecting and commissioning Single Girder Hand Operated Rectangular Type Travelling Crane 5 MT capacity, 8 Mtr span, with 6 m lift complete with chain pulley block ISI marked and travelling trolley both tested for 50 % overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc complete. Above 8 m upto 10 m span

Item No. 11 Supplying and erecting 50 kVAR , 440 V Three phase, 50 cycles, THYRISTER SWITCHED MICRO APFC PASSIVE FILTER PANEL, consisting of (25k + 15k +10k) steps of APP type capacitor units confirming to IS- 13585 ( Part – I ) 1994 with harmonic filter reactors, suitable for a) 100 kW load as per specification no ESD-APFC b) 150 kW load as per specification no ESD-APFC c) 200 kW load as per specification no ESD-APFC All PH

Item No. 12 Providing, Laying, connecting, testing and commissioning cables as per detailed specifications and schedule. With all cable termination kits, glands, lugs etc. Complete as per requirement. A) 11 kV, 3 core x 70 sq. mm.PVC Aluminium conductor armoured cable. ( For MSEB main + PH main panel)

B) 1.1 kV, 4 core x 35 sq. mm.PVC Aluminium conductor armoured cable.

C) 3 core x 10 sqmm Al. armoured cable for capacitor

Item No. 13 Providing and laying RCC ( M-150) cable duct of size given below for laying electric cable including form work for centering M.S. bar reinforcement, necessary excavation bolder filling, PCC (M100), compacting, curing , plastering, including providing and fixing 35 X35 X 5 mm M.S. angles, RCC pre cast cover of Adequate length with 100 mm over lap on either walls etc complete and providing RCC pre cast covers. Cable duct 2 tier-750W X 750 D

Item No. 14 D) Providing and fixing G.I. Perforated cable trays of size as below including fixing on provided angles. 200mm X 20mm

Item No. 15 Providing, erecting and commissioning pump house lighting and external electrifications as per detailed specifications. ( As per rate analysis)

Item No. 17 Providing, erecting and testing earthing with earth plate, earth pits, chamber, earth bus, earth conductor etc. complete as per detailed specifications. a) Providing Plate type earth electrode with chambers ( 9-1-3/58)

b) Providing G.I. Earthing strip of required size.

Item No. 18 Providing & erecting substation work with transformer / switchyard and other facilities as required etc. complete at PH @ 200 KVA

Item No. 19 Load sanction charges from MSEDCL for all locations

Item No. 20 Providing, fabricating, erecting, testing and commissioning as per IS 2825 (code for unfired pressure vessels) Surge vessel / Air Vessel fabricated in boiler quality plate conforming to grade I of IS 2002 with radiography testing on provided foundation including epoxy painting. Boiler quality Plate

Item No. 21 Pressure Tank 450 ltrs