PROVISION OF CONSTRUCTION OF 18 NOS TYPE - V QTRS AT VIGYAN VIHAR PH-II AT ADRDE AGRA UNDER GE (I) RnD DELHI

Amount

Schedule 'A' Section-I to Section-XII (Part-I), under Ser No. 2 to 13 are prepriced by MES based on SSR (Pt-II)-2020

Lump sum price worked out by the Contractor for “Building Work” as listed in Schedule ‘A’ Section- I

Lump sum price worked out by the Contractor for “Excavation and Earth Work” as listed in Schedule ‘A’ Section- II (Part-I)

Lump sum price worked out by the Contractor for “DEMOLITION WORKS” as listed in Schedule ‘A’ Section- III (Part-I)

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Section- IV (Part-I)

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Section- V (Part-I)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Section- VI (Part-I)

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Section- VII (Part-I)

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Section- VIII (Part-I)

Lump sum price worked out by the Contractor for "AREA DRAINAGE ” as listed in Schedule ‘A’ Section- IX (Part-I)

Lump sum price worked out by the Contractor for “ROAD/HARDSTANDIG / CULVERT AND WIDENDING OF ROAD” as listed in Schedule ‘A’ Section- X (Part-I)

Lump sum price worked out by the Contractor for “FIRE FIGHTING” as listed in Schedule ‘A’ Section- XI (Part-I)

Lump sum price worked out by the Contractor for "FENCING GATE ” as listed in Schedule ‘A’ Section- XII (Part-I)

SCHEDULE `A' Section-IV, PART - II (INTERNAL ELECTRIFICATION) (To be quoted by the tenderer)

M&L for point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts with ultistranded copper conductor conforming to IS:694:1990 with ISI marking (For Phase, Neutral and Earth) in and including Non metalic PVC rigidconduit medium grade with ISI mark of size 20mm dia with all accessories concealed in wall/ceiling /floor/roofetc,including factory made galvanized modular steel pressed terminal boxes alongwith suitable modular base plate and cover plate with frame of suitable modules and the earth wire to be connected to common earth dolly complete for mains & inverter supply points same board point 5 Amps with other switches on board as per scematic drawing of internal Electrification all as specified and directed

Material and labour for wiring for light /power plug with 2x4 Sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduite alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing modular TV antenna socket outlet on the existing modular plate and switch box including connections but excluding modular plate etc. Complete all as specified and directed.

Supplying and fixing co-axial TV cable RG 6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recess steel/ PVC conduite as required. Complete all as specified and directed.

Supplying and fixing telephone socket outlet switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Complete all as specified & directed .

Supply & Fix telephohe cable sorrounded by a concentric conducting shied of copper conductor separated by insulating material conforming to IS complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lampincluding connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket not less than 1.5 mtr in length bended in 1:2 ratio at angle of 120 degree with fixed using clamp and nut bolt and washer of suitable size and connected form ceilling rose using 1.5 sqmm x 3 core impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

S&F decorative stainless steel rust free fixtures with white glass diffuser suitable for 9 watt LED lamp of type E22 base with LED bulb 9 watt complete with electrical connection all as specified and directed.

Supply and fix lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings

Supply and fixing of 6 Ways 240 Volts, single pole and neutral, sheet steel, MCB distribution board double door, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted etc. as required. (but without MCB/RCCB/ISOLATOR). Complete all as specified and directed.

Supply and fixing of 12 Ways 415 Volts surface/ recess mounting vertical type, TPN MCCB distribution board of sheet steel, dust protected, dully powder painted, inclusive of 200 A tinned bus bar, common neutral link, earth bar, for mounting MCBs (but without MCBs and incommer) as required. (Note: Vertical type MCB TPDB is normally used where three phase outlets are required. Complete all as specified and directed.

Single pole and neutral modular enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified & directed

Supplying and fixing Tripple pole and neutral 5 A to 32 A rating, 240/415 V, 10 kA breaking capacity suitable for existing distribution box complete with connections, testing and commissioning etc. as required. Complete all as specified & directed

Provinding and fixing 100 Amps, 4 Pole, 415 V, 10 kA, MCCB with thermomagnetic release and terminal seprators in existing cubical panel board including drilling holes in cubical panel making connections etcas required. Complete all as specified and directed. Make : Schneider/L&T/Legrand.

Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 250msweep with, blades, and frame and louvers

M&L for Wiring for circuit/submain wiring alongwith earth wire with 4x10 sq.mm + 2x 10 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Complete all as specified and directed. Note: 6 run of 10 sqm PVC cable and 01 run of PVC conduit shall be measure one unit.

M&L for Wiring for circuit/submain wiring alongwith earth wire with 4x16 sq.mm + 2x 16 sq.mm of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Complete all as specified and directed. Note: 6 run of 16 sqm PVC cable and fun of PVC conduit shall be measure one unit.

Supply & fixing smart three phase four wire energy meter BIS 16444 :- 2015 (reaffirmed 2020) marked in existing meter board / floor panels having current rang 10-60 Amps , 415 V accuracy class 1.0

Providing and fixing 6 SWG dia GI wire on surface or recess in and including 15 mm dia light grade GI pipe for loop earthing as required. Complete all as specified and directed.

SCHEDULE `A' Section-V, PART - II (EXTERNAL ELECTRIFICATION) (To be quoted by the tenderer)

M&L air break switch gang operated device HT 11 KV triple pole outdoor type with 12 insulator 200 Amps rating with drop out fuse assly with fuse carrier and the fuse element mounted on insulator and steel frame mechanically operated with operating mechanism consisting of operating rod of 25mm bore light grade GI pipe of suitable length operative from ground level and with locking arrangement with MS flat iron clamp 50 x 6 mm including MS channel of suitable size and length to fixing GOD including nuts, bolts and washers all as specified and as directed.

Supply and erection of ACSR Conductor of 7/3 mm to 7/4.00 diameter and above incl biding etc as required complete as specified and directed.

Erection of metallic pole of lenth10-12 mtr fo following lenth in cement concrete 1:3:6(1Cement:3Coarse sand: 6 graded stone aggregate 40 mm nominla size) foundation incl excavation refilling etc as required and shall be comprises of followings: A. Depth of foundation will be as per SSR Part-I para 19.3.3 as directed by Engineer-in-Charge. B. Length and Width of trench will be 0.6 mtrx06.mtr in which PCC 1:3:6 will be poured after fixing the pole in true vartical position. C. Canopy size for the pole above ground will be 0.6 mtrx0.6 mtrx0.6 mtr

Supply and fix lightning arrestor HT 11 KV 65 KA station class.

Supply, installation, commissioning and testing three phase 11 KV/0.433 KV transformer, copper wound with tertiary winding, step down, out door type, 50 cycle per second (50 Hz) AC, oil immersed, naturally cooled with external cooling tubes/radiators, core type, double copper wound, delta connection on primary side (HV side) and star connection on secondary side (LV Side) in accordance EEL- 3 , Total Losses 603 W @50% Load and 1911 watt @100% Load ,adjusted to suit the max ambient temperature of 40 degree C prevailing at site all as directed and specified of capacity 200 KVA including first fill of transformer oil including mounting platform as per OEM recommondation . The transformer shall be complete with all the fittings and accessories.

S & F steel tubular swaged pole complete with cast iron base plate finial taper plug,bolts,nuts,and screw as specified type SP-55 (11.0 metres long) including fixing of cross arms ,insulators and all electrical cables/ACSR conductors/earthwires and painting with two coats of aluminium paints over a coat of red oxide primer of pole as per sample including taking out the old one complete all as specifies and directed. Note: (i) The portion above coping shall be painted in alternative bands of colours starting with black colour (each band of 30 Cm wide) by two coats of Synthetic enamel paint upto 1.5 meter height and the cost of same shall be deemed to be included in the rate quoted. (ii) The pole numbers etc shall be enumerated on the poles and the cost of writing letters with synthetic enamel paint shall be deemed to be included in the rate quoted. (iii) PCC and and exavation shall be measured and paid seperately. (iv) The rates also include drilling of holes in steel tubular poles for continuous G.I. earth wire etc. to the required size and number.

Supply and erecting in true vartical position steel tubular swaged poles type 410 SP-22 (8.5 meter long) complete with CI base plate pole cap,finial taper plug,bolts, nuts, washers etc including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note: (i) The portion above coping shall be painted in alternative bands of colours starting with black colour (each band of 30 Cm wide) by two coats of Synthetic enamel paint upto 1.5 meter height and the cost of same shall be deemed to be included in the rate quoted. (ii) The pole numbers etc shall be enumerated on the poles and the cost of writing letters with synthetic enamel paint shall be deemed to be included in the rate quoted. (iii) PCC and and exavation shall be measured and paid seperately. (iv) The rates also include drilling of holes in steel tubular poles for continuous G.I. earth wire etc. to the required size and number.

Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket not less than 1.5 m in length bended in 1:2 ratio at angle of 120 degree and fixed using clamp and nut bolt and washer of suitable size impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection icomplete all as specified and directed by Engr-in-Charge.

Supply installation testing and commissioning of street light panel single phase suitable for max load of 3 KW with natureswitch sensor and hensel enclosure conforming to IP 66,25 amp MCB suitable and including mounting on wall/pole for control street light/aviation light including connections with the cable gland aluminium lug, MS FIixing clamp ,cutting the hole in wall of suitable size including taking out the old main switch/MCB/MCCB complete all as specified and directed. Make - SWADEEP-66-3KW1P or eqvt

Providing and fixing 25mmx5mm GI strip in 40 mm dia GI pipe light grade from earth electrode including connection with GI nut, bolt, spring, and welding at joints as etc as required

Prociding and alying earth connection from earth electrode with 6 SWG di GI Wire in 15 mm dia GI pipe from earth electode incl connection with GI thimmble excavation and re-filling as required.

SCHEDULE `A' Section-VI, PART - II (INTERNAL WATER SUPPLY) (To be quoted by the tenderer)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls

(a) 15mm outer dia

(b) 20mm outer dia

( c) 25mm outer dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge

(a) 40mm outer dia

S&F fancy type Bib taps with wall flange,chromium plated cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed complete.Make : jaguar cat part No. FUS-29037 or equivalent in Kohler/Grohe.

S&F fancy type two way bib taps with wall flange,chromium plated cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed complete.Make : jaguar cat part No. FUS-29041 or equivalent in Kohler/Grohe.

S&F wall mixer 3 in 1 system with provision for both Hand shower (105 mm round shape) and overhead shower complete with 115mm long bend pipe,connecting legs & wall flange. Make: Jaguar cat part No.QQP7281PM and HSH1717 or equivalent in Kohler/Grohe

S&F CP Basin mixer single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses. Make: Jaguar cat part no.FUS-29005NB or equivalent in Kohler/Grohe.

S&F overhead shower 180mm dia round shape single flow with air effect (ABS body& face plate chrome plated) with rubit cleaning sysytem complete all as specified and directed.Make: Jaguar cat part no.OHS-1755 or equivalent.

S&F of CP fancy type angular stop cock 15mm dia with wall flange complete all as specfied and directed.Make: jaguar cat part no. FLR-5053N or equivalent

S&F CP towel ring square with round flange complete all as specified& directed. Make: Jaguar cat part No. ACN 1121N or equivalent

S&F towel rail 600mm long stainless steel complete all as specified and directed. Make: jaguar cat part no.ACN 1111SN or equivalent.

S&F toilet paper roll holder with stainless steel flap complete all as specified and directed. Make: jaguar cat part no.ACN 11535 or equivalent

S&F towel rack with lower hanger(stainless steel) with hook complete all as specified &directed. Make: jaguar cat part no. AHS-1581H or equivalent.

S&F health faucet spray with 1 mtr long easy flex tube in chrome finish & wall hook complete all as specified and directed. Make: Jaguar cat part no ALD-565 or equivalent

Supply, fixing and commissioning water heater storage type 25 litres capacity, BEE 5 star and 8 bar pressure rated, with feroglass coated inner container energy saving high density PUF insulation vertical, Adjustable knob for setting the temprature ,shock safe plug to prevent electric shocks by cutting off the power in case of current leakage,2000 watt rating grouting of studs in wall in cement mortar (1:3) nuts, washers, provision of two numbers PVC braided connection 450 mm long heavy duty with brass nuts and two numbers brass chromium plated angular valve with wall flange suitable for 15mm bore pipe for water supply connection complete all as specified and directed. Make:HAVELLS MONZA DX or equivt make and model of RECOLDS/USHA/BAJAJ

S & F CP pillar tap, fancy type cast copper alloy chrome finished as specified make: Jaquar cat part No KUP35001PM or equivalent in kohler/Grohe

S&F CP bottle trap 32 mm size with 300 mm and 190 mm long wall connection pipe and wall flange. Make: Jaquar cat part No ALD7692 (300 x 190) or equivalen in Jaguar/Grohe.

SCHEDULE `A' Section-VII, PART - II (EXTERNAL WATER SUPPLY) (To be quoted by the tenderer)

Taking up carefully, submercible pump of any capacity from existing bore including colomn pipe, cable etc and depositing to AGE E/M office complete.

Supply installation , lowering, testing, commissioning submersible pump set multistage with submersible motor 3 Phase , 415V , 2800 rpm not less than 10HP complete all as specfied and directed.

Supply installation testing and commissioing of openwell submersible pumping sets electric operated multistage having minimum discharge capacity of 420 LPM at 48 M 2900 RPM, 3 phase, 415 volt, head with steel shaft , CI impeller, CI casing totally enclosed with suitable capacity squirrel cage induciton motor 7.5HP for suitable operation on 3 phase , 50 Hz, 415 V, including making PCC foundation of suitable size. Note: A. The pump set will be fixed on common base channel frame supported by anti viberation pad and also to be fixed by nylon rope in sump to easily taking out the pump set in case of failure B. necessay electric connection with multi stranded copper conductor cable of suitable size from starter to motor and making inlet/outlet pipe line connection using nuts, bolts, rubbers gaskets etc and other required materials for smooth funciton of pump sets complete all as specified and as directed.

S & F Cast iron sluice valve of size 100 mm (4'') dia with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete including removing of old unsv one complete all as specified.

Supply and fix non return butterfly valve gun metal type including fittings 50 mm (2”) dia.

M&L construction of Brick Masonry Valve Pit, one Brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40X5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in Soft/Loose Soil and demolition of old unserviceable Valve Pit of internal size 900 mmx900mmx900 mm complete all as specified and as directed.

M/L for cutting the existing GI pipe line 100mm dia and inserting Tee of size 100x100x50mm for making new branch conection of GI pipe of size 50mm dia including necessary fittings,excavation,returning and filling and depositing excavated material to a distance not exc 50m complete all as specified and as directad

Supply and fix " Aquafit" Chlorine dosing system,including Preparation tank Model No-AQUA1005 of net capacity 170 Ltr,FRP dosing tank dia 650 x height 375 +conical 300 mm, gross height with stand 1000 mm consisting of water inlet line, out let with "Y" strainer, drain, over flow, conical bottom foe sluydge deposition, pot hole with cover, levelgauge Agitator 120 watt 900 RPM, single phaseflenged mounted motor with plastic shaft, and impeller and Service tank Model No-AQUA1006 of net capacity100 Ltr of FRP dosing tank top dia 540 mm x bottom dia 480 mm x height 575 mmconsisting of water inlet line, dosing pump inlet arrangement, drain, over flow, level gauge, inspection port, Agitator 120 watt 900 RPM, single phase flenged mounted motor with plastic shaft, and impeller, provision of mounting lid complete.

SCHEDULE `A' Section VIII, PART - II (SEWAGE DISPOSAL) (To be quoted by the tenderer)

Providing and laying DWCPE (SN8) 180 (OD)/163(ID) mm diameterpipes including testing of joints etc. complete.

Providing and laying cement concrete 1:3:6 type C2 (40 mm stone aggregate nominal size) upto haunches of DWCPE 180mm (OD) pipes including bed concrete as per standard design.

M & L for Neat cement punning complete all as specifed and directed.

M & L for Providing and fixing in position pre-cast R.C.C. manhole cover and frame HD-20, of circular shape 560 mm internal diameter.

SCHEDULE `A' Section-X, PART - II (HARDSTANDING/ROAD/PAVER AND WIDENING OF ROAD) (To be quoted by the tenderer)

Scarifying metalled (black-top) road surface including disposal of rubbish,outside MoD land and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

M & L for construction of granular sub-base by providing close graded material conforming to Grade-II (size range 53 mm to 0.075 mm) having CBR Value-25, conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

M & L for providing and laying in position cement concrete 1:4:8 (1 Cement: 4 Coarse Sand zone-III derived from natural source: 8 Coarse Stone aggregate 40 mm normal size from natural source) for all work upto plinth level excluding complete

M & L for providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

M & L for providing and applying tack coat on W.M.M. or scarifed road surface using hot straight run bitumen of grade VG - 10 @ 0.75 Kg / sqm, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications.

M & L for providing and laying 50 to 100 mm average compacted thickness bituminous macadam using crushed stone aggregates of specified grading premixed with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in drum type hot mix plant of 60-90 TPH capacity transported to site by tippers, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.

M&L for providing and applying tack coat on bituminous surface @ 0.50 Kg / sqm using hot straight run bitumen of grade VG - 10 @ 0.5 Kg / sqm, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications.

M &L for providing and laying 40 mm compacted thickness bituminous concrete using crushed stone aggregates of specified grading, premixed withwith bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 TPH capacity, transporting the hot mix to work site by tippers, laying with paver finisher level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.

M &L for Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

SCHEDULE `A' Section-XI, PART - II (Fire Fighting) (To be quoted by the tenderer)

Supply and fix MS flanged pipe 100 mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over a coat of zink chromate primer.

Supply and fix fire hydrant landing valve type 'A' ( single head outlet) of 63 mm dia cinfirming to IS 5290

Supply and fix hose box for keeping 2 Nos hosepipe of length 15 mtr each, branch pipe , nozzle, coupling etc of MS sheet of thickness 2.0 mm.

Supply and fix 63 mm dia gun metal branch pipe with 12.5 mm nozzle confirming to IS 903

Supply and fix 63 mm dia 15 mtr long hose confirming to IS 636 complete with male and female coupling confirming to IS 903

Supply and fix cast iron air release valve with single air out let, confirming to IS 4845 of size 100 mm dia bore and fixing up in MS pipe 100 mm bore complete set.

Supply and fix 100 mm bore reflex valve (NRV) with by pass arrangement , 100 mm dia with complete set.

Supply an fix Gun metal fire brigade inlet connection for connecting to external fire hydrant ring main consisting of two Nos 63 mm dia instantaneous type male coupling with built in check valve and 150 mm dia , flenged out let complete with alll accessories.

Supply and fix addressable mannual call point break glass type with alarm LED complete.

Supplying and drawing 1.5 sqmmx3 sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of 20 mm dia sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 4 Core, 4 Sq mm 1100 Volts grade.

Suppluy and fixing of signage shop glow in dark FIRE EXIT sign board with man running arrow symbol and staie of dimension 12" x 6" X 8 mm decorative transparent acralic, including fixing arrangement all as specified and directed.

Supply and fixing pressure gauge 100 mm dia with ball valve of pressure 25 Kg/sqcm.

Supply and fixing air cushioning tank 250 mm diax1000 mm high with dished top,made of minimum 6 mm thick MS pipe/plate complete with 20 mm dia,brass air valve ( ball type) ,20 mm dia stop valve ,pressure gauge with brass stop cock,nipple tees elbows and all accessories complete.

Supply and fixing branchpipe with nozzle of 20 mm dia for hose reel conforming to IS 8090

Supply and fixing fire extingusher dry chemical/dry powder ( light IS:15683 power ABC type ) 4 Kg capacity

Supply and fixing fire extingusher CO2 type ( light IS:15683 weight squeeze grip type ) 3 Kg capacity

Supply and fixing fire extingusher water ( Store pressure type) 9 Ltr

Supply and fixing fire extingusher dry chemical/dry powder ( light IS:15683 power ABC type ) 9 Kg capacity

Supply and fixing fire extingusher CO2 type ( light IS:15683 weight squeeze grip type ) 4.5 Kg capacity

Supply and fixing mechanical foam extingusher ( light IS:15683 store pressure type ) 9 Ltr capacity

Supply and fixing fire buckets( dry sand)

SCHEDULE `A' Section-XII, PART - II (FENCING GATE) (To be quoted by the tenderer)

M&L for providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite stone, area of slab over 0.50 sqm, colour black, cherry or ruby red for facias and similar locations of required size, laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

SCHEDULE `A' Section-XIII, PART - II (LIGTING PROTECTION) (To be quoted by the tenderer)

M &L for providing and Fixing of lighting conductor finial, made of 25 mm dia 300 mm longg, GI tube having single prong at top with 85mm dia 6 mm thick GI base plate incl holes etc complete as requied

Providing and fixing tesing joint, made of 20 mm x 3 mm thick GI strip 125 mm long, with 4 nos of GI bolts, nuts, chuck nut and spring washers etc complete as required.

Providing and fixing GI tape 20 mmx 3 mm thick on parapet or surface of wall using synthetic insulator of suitable size at not more than 0.5 mtr distance for lightning conductor complete s required ( for horizontal run)

Providing and fixing GI tape 20 mmx 3 mm thick on parapet or surface of wall sing synthetic insulator of suitable size at not more than 0.5 mtr distance for lightning conductor complete s required ( for verticall run)

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground in 50 mm GI pipe GI pipe for protection as required Note: GI Pipe will be measure and paid separately.

Supply and fix GI pipe of 50 mm dia for extension of air termination rod medium grade including fixing on roof with PCC Block of suitable size (not less than 0.3 mtr x 0.3 mtr x 0.3 mtr) of 2.5 Mtr length of each pipe

Supply and fix GI pipe of 50 mm dia for medium grade incl all fitting required

SCHEDULE `A' Section-XIV, PART - II (LIFT WORKS) (To be quoted by the tenderer)

Supply and fix Lift electrically operated microprocessor controlled complete with driven automatic stainless steel (SS) sliding door and having SS car encloser suitable to carry 13 passanger (884 kg) including Automatic rescue device for lifts at a speed of 1.5 M/Sec to serve up to 7 floor (G+6 Floor)

Supply and fix Lift electrically operated microprocessor controlled complete with driven automatic stainless steel (SS) sliding door and having SS car encloser suitable to carry 8 passanger (554kg) ncluding Automatic rescue device for lifts at a speed of 1.5 M/Sec to serve up to 7 floor (G+6 Floor)

Supplying and fixing 4 way, horizontal type three pole and neutral, sheet steel, MCB distribution board double door, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing following rating, four pole, 415 volts,63 amps isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

S&F MCB Single pole and neutral 6-32 Amps.

Earthing with GI earth plate 600mm x 600 mm x 6 mm thick incl accessories, and providing masonry enclosure with cover plate having locking arrangement and water pipe of 2.7 metre long etc with charcoal/coke and salt as required

Providing and fixing 25mmx5mm GI strip n 40 mm dia GI pipe from earth electrode incl connection with GI nut, bolt, spring, washer ecavion and re-filling etc as required.

Providing and laying earht connection from earth electrode with 6 SWG dia GI Wire in 15 mm dia GI pipe from earth electrode incl connection with GI thimble excavtion and re-filling as required.

SCHEDULE `A' Section-XV, PART - II (DG SETS) (To be quoted by the tenderer)

Supply and installation of Silent Diesel Engine driven Generating set 415 Volts, 3 Phase 4 wire, emgine as per IS 10001/10002 and Alternater as per IS 13364 complete with relay panel and switch gears for automatic starting on main failure control panel having meter and sound proof canopy as per CPCB IV norms and including foundation etc of capacity 50 KVA.

SCHEDULE `A' Section-XVI, PART - II (SITE DEVELOPMENT) (To be quoted by the tenderer)

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Levlling complete all as specified and directed.

M/s Arihant Builders

MAGO CONSTRUCTION PVT. LTD.

BHARATSHAH CONSTRUCTION CO

B D Raizada Projects Pvt Ltd