Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.2 LAccepted-AOC | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹14.3 L+₹10,427.80 (0.73%)Rejected-AOC | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹14.9 L+₹65,379.20 (4.60%)Rejected-AOC | L3 | Rejected-AOC Other than the lowest bidder | |
| 4 | L4₹17.2 L+₹3.0 L (21.0%)Rejected-AOC | L4 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹15.2 L
EMD Value
₹30,440
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE JUTOGH
GE JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
PROVN OF CERTAIN MINOR AND REVENUE WORKS AT JUTOGH CANTT UNDER GE JUTOGH
2022_MES_530872_1
GE/JUT-11 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
JUTOGH CANTT
CLASS E CATEGORY a (i)
7 documents required · 7 mandatory
₹500
GE JUTOGH
₹30,440
Yes
28 Jul 2022
14 Jun 2022
22 Jul 2022
14 Jun 2022
20 Jul 2022
28 Jun 2022
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in hard/dense soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, etc. and getting out complete all as specified and directed.
M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed
Returning filling in including spreading, levelling watering & well ramming in layers n. exc. 25 Cm thick in each layers complete all as specified and directed.
Removing excavated material to a distence n exc 50m and depositing where directed at a level n exc. 1.50 M above the starting point for any type of soil complete all as specified and directed.
M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work rough finished surface complete all as specified and directed.
M&L for RCC 1:1.5:3, Type A-1, using 20mm graded crushed stone aggregate as in foundation of column footings, plinth beams, bases for columns , basement slabs etc. complete all as specified and directed.
Form work to sides of columns (square, rectangular or polygonal) complete all as specified & directed.
M&L for reinforced cement concrete type A-1, 1:1.5:3, using 20mm graded crushed stone aggregate as in columns etc. complete all as specified and directed.
Form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed
M&L for RCC 1:1.5:3, type A-1, using 20mm graded crushed stone aggregate as in beams, cantilevers, bressumers lintels over 1.5 m span etc. complete all as specified and directed.
Use and waste of form work to soffit of chajjas, shelves troughs and similar items including edges for rough finished surface complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F MS TMT bar 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L MS TMT bars, 5mm dia and over upto and incl 10mm dia as in stirrups, spacers, binders etc cut to shape requred, incl cranking spirally for hooping for columns, hooking ends binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed.
M&L for mooram/ red bajri filling in floor or paving laid in layers not exc 15cm thick including spreading, levelling and watering complete all as specified and directed.
M&L for broken stone hard core of gauge n. exc. 63mm deposited, spread and levelled in layer n. exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in sub base finishing concrete surfaces even and rough to receive top layer complete all as specified and directed.
M&L for 50mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.
M & L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surface of walls, mixed with water proofing compound @3% as per manufacturer's instructions, finished even and fair complete all as specified and directed. Note: WPC shall be measured and paid separately as supply only.
M&L for rendering 10mm thick on fair faces of brick or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified and directed.
Supply only water proofing compound as approved complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel ventilator with top hung shutters including hinges and steel peg stay, complete all as specified and directed.
S&F 4mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.
S&F IInd class hardwood factory made panelled shutters 35mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.
S&F factory made 35 mm thick IInd class hardwood Glazed & skeleton shutters, open rebated & prepare to receive gauze, divided into squares, with plain, chamfered and rounded,mitred and rebated sash bars, any numbers size of members of shutter as specidied in SSR Part-I section 8 (clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.
S&F of galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.
S&F 250mm long mild steel sliding door bolt, plate type, stove enamelled black with bright bolt not less than, 12mm dia with and including 6 boths and nuts four on bolt plate and two on staple plate ISI marked complete all as specified.
S & F 300mm ordinary rat rail pattern springs including roller and roller plate complete all as specified and directed.
S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed.
S&F Butt hinges 75mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type C-21 complete all as specified and directed.
S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.
S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long complete all as specified and directed.
S & F floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment steel conforming to Fe-410 Gde E-250 quality 'A' complete all as specified and directed.
S&F mild steel screw bolts (machine made) dia of neck exceeding 5 but not exc 10 mm with hexagonal or square head at one end and screwed the other end or screwed both end, each screw end to be fitted with washers and one hexagonal or square nuts, n.exc 5cm long complete all as specified and directed.
S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' complete all as specified and directed.
M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamelled paint over and incl one coat of red oxide primer complete all as specified and directed.
M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for glazed ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm, 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
M&L for preparing newly plastered or unpalastered surfaces of wall and applying three coat of white wash complete all as specified and directed.
M&L for preperation of new plastered or unplastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore complete all as specified and directed.
S & F rotational moulded polyethylene water storage tanks 500 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc., complete all as specified and directed.
S&F 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or btter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.
S&F 15mm dia stop valve, cast copper alloy, fency type chromium plated screwed down, high pressure with crutch or btter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.
S & F 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe complete all as specified and directed.
S & F 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as specified and directed.
S & F of 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed.
S&F CP brass jet spray (health faucet) with flexible pipe 1.50m long fixedto EWC suitable for 15mm bore of pipe fixed complete all as specified and directed
S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges ccomplete all as specified and directed.
S& F 15mm dia PVC connection pipe with PTMT nuts of length 600mm long complete all as specified and directed.
S& F 32mm dia PVC waste pipe with PTMT nuts of length 900mm for wash hand basin and kitchen sink complete all as specified and directed.
S&F EWC vitreous china wash down water closet pan padestal pattern white with fittings P/S trap fixed with brass screw complete all as specified and directed.
S & F plastic water closet seat cover white/ coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets complete all as specified and directed.
S&F wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.
M&L for 20 mm dia mild steel coloured PVC coated fancy curtain rod complete all as specified and directed.
M&L for mild steel coloured brackets including PVC designer dom for curtain rod complete all as specified and directed.
Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/disintregated rock complete all as specified and directed.
M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping to retaining wall/ steps/ perapet/ base of railing post hold fast block or similar work and finished the surface with existing and including form work complete all as specified and directed .
M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.
M&L for precast reinforced cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in landings, cover slabs ( for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 including demoltion of reinforced cement concrete complete all as specified and directed. Note: Reinforcement shall be measured and paid for separately.
S&F PVC (SWR) pipes, 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed
M&L for concrete bed to drain pipe in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 110mm bore pipe complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, comlete all as specified and directed.
Excavation over area not not exc 1.5m deep and getting out in hard/dense soil, comlete all as specified and directed.
M&L for 40mm thick Damp proof course horizontal surfaces incl necessary form work in PCC (1:2:4) type B-0 (using 12.5 graded crushed stone aggregate) mixed with water proofing compound as per manufacturers recommendation complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
M&L for 75mm thick PCC 1:3:6 type C-2, using 40mm graded crushed stone aggreate as in plinth protection, the plinth protection shall be laid in alternate bays finishing the surface even and smooth without using extra cement complete all as specified and directed.
M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre polished glossy finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290-0 or Gde E-165 complete all as specified and directed.
S & F rotational moulded polyethylene water storage tanks 1000 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc., complete all as specified and directed.
S&F 20mm bore ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed complete all as specified and directed
S&F 20mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of 20mm dia of pipe, complete all as specified and directed.
S&F cast copper alloy bib taps short body, fancy type, CP screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
S & F 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as specified and directed.
S & F 15mm brass CP wash hand basin/ kitchen sink mixer for mixing hot and cold water complete all as specified and directed.
S&F 32mm bore low density polythelene pipe (LDPE) of pressure rating 6Kgf/Sqcm complete fixed to walls and ceiling or laid in floors complete all as specified and directed
M&L for 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement outlet complete all as specified.
S&F PVC (SWR) pipes, 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed
S&F PVC (SWR) bends 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
S&F 110 mm bore, PVC (SWR), junction single, (Single T) equal or unequal fixed with approved adhesive complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel powder coated of 50mm size complete all as specified and directed.
S&F 125 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed.
M&L for providing and fixing Gypsum board 12mm thick in ceiling fixed with screw of size 60cmx60cm placed in ceiling including aluminium anodised snap grid frame 605 x 605 mm for false ceiling including hanging arrangements complete all as specified and directed.
S&F GI frame work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed.
S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified and directed.
S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.
M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with concealed conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification , complete all as specified and directed.
One 5 pin 5/6 Amp socket on the same board complete all as specified and directed.
One 3 pin 15 Amp socket independent but with 2.5 sq mm PVC insulated (FRLS) unsheathed copper stranded conductor and earth wire with 2.5 Sqmm
S & F switch piano type 240 V, 6 Amp , SP one way flush type complete all as specified and directed.
S&F switch piano 15 Amps flush type 230 Volts , AC complete all as specified and directed.
S&F socket 5 pin, 6 Amp, flush type piano (multi purpose) complete all as specified and directed.
S&F Socket 15 Amps flush type 230 Volts , AC complete all as specified and directed.
S&F ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.
S&F for lamp holder pvc body with back plate complete including with 9/10 Watt LED lamp complete all as specified and directed.
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6sqmm, two core, nominal cross section in service connections, complete all as specified and directed.
S&F sheet metal enclosures for MCB distribution board SPN 4 way double door type with 200 amps rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed.
S&F MCB SPN 6 to 32 Amps 240V incl all termnials, fitting etc. complete all as specified and directed.
S&F MCB SP 6-32 Amp, 240 Volt incl all termnials, fitting etc. complete all as specified and directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level), and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6, type C-2, all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point including all earth work excavation, returning filling and disposal of surplus soil and testing on completion all as specified and directed.
M/S Shiv Kumar
Pankaj Builders
M/S Meera Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .