i. Repairing of 02 2 Nos. tilt cylinder foundation pins and replacement of seal kit of LHS tilt cylinder assembly of Wheel Dozer Machine Sl. No. LWY00746, Model 834 ii. Repairing of trunion balls C- clamp both side rebuilding, A-frame bolt taking

Amount

A. Repairing of 02 2 Nos. tilt cylinder foundation pins and replacement of seal kit of LHS tilt cylinder assembly of Wheel Dozer MAchine Sl. No. LWY00746, Model - 834

Opening of both tilt cylinder assy. after pulling out cylinder guard, lower pins and opening 4 nos. upper mounting bolts and connecting hoses.

Fitter

Helper

Supervisor

Repairing of both bracket and their oval eye of push arm GP through materials depositing by welding and their machining.

Repairing of both trunion of blade by materials depositing through welding with suitable electrode and then machining.

Repairing of cap bearing and piston rod end by materials depositing through welding with suitable electrodes.

Machining of cap bearing and piston rod end.

Repairing of cylinder end pins by welding and their machining.

Dismantling of LHS tilt cylinder, replacement of its seal kit and its assembling.

Seal Wiper (2330621)

Seal As Buffer (1672184)

Seal U Cup (1672318)

Ring wear (1865147)

Ring Wear (4J4606)

Seal O Ring (8J1698)

Ring Backup (8J1689)

Seal As (9X3598)

Fitter

Helper

Supervisor

Mounting of both tilt cylinder assy by fitting pins, upper mounting bolts, connecting hoses and cylinder guards

Fitter

Helper

Supervisor

B. Repairing of trunion ball's C- clamp both side rebuilding, A-frame bolt taking out and threading by tapping, A-frame idler portion straightening by heating and hyd. jack pressing of Dozer Sl. No. T-11654

Trunion ball and its cap welding.

Rebuilding of worn-out trunion balls and its cap with suitable electrode (both sides)

Grinding wheels 4" x 1" x 1/2"

Hard facing electrode

Grinding fitter

Welder

Helper

Supervisor

Idler frame straighening by heating and hydraulic jack pressing.

Dismantling of chain and idler (both sides)

Supervisor

Fitter

Helper

Straightenin by Gas welding and hydraulic pressing.

Providing and fitment of H.T bolts by taking out broken bolts & making thread.

Refitting of idler, chain and other assemblies.

Supervisor

Fitter

Helper

C. Repairing of floor frame and exhaust system of BD-355 Dozer Sl. No. T-11723

Cutting of broken / rusted angle LH & RH both rear and front as well as plates.

Welder

Helper

Fitter

Supervisor

Replacement of 03 Nos. new angle size 1.5" x 3" and floor plate 3.15mm x 12 sq. ft after bending at proper angle, denting, setting and welding including material chrage for man power.

Cutting of 04 Nos worn-out & broken bracket from frame

Welder

Helper

Fitter

Supervisor

Repairing of 04 nos. broken bracket with materials, holes making as per bolt size in drill machine, setting and welding on the frame.

Replacement of 12 nos. bolts of the frame & 06 nos. bracket mounting bolts with mounting pad.

Bolts 25mm x 3" with washer c* nuts.

Mounting bolts and mounting pad.

Opening of broken & rusted exhaust pipe & silencer box from mounting.

Repairing of of both end flange & making holes of proper size by aliment.

Cutting of rusted pipes, new pipe setting, denting, gas welding & repairing.

Complete repairing of silencer box after replacement of damaged parts its inner parts repairing with materials.

Total impact of GST for the purpose of CTC

M/S A.K. TRADING

ATTAULLAH ANSARI