Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.3 LAccepted-AOC | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹32.6 L+₹40,138.25 (1.25%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹32.9 L+₹73,357 (2.28%)Rejected-AOC | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹33.5 L+₹1.3 L (4.01%)Rejected-AOC | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹33.8 L+₹1.6 L (5.00%)Rejected-AOC | L5 | Rejected-AOC Other than L1 |
Tender Value
₹42.2 L
EMD Value
₹84,500
Closing Date
17 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(North) Akhnoor
Garrison Engineer (North) Akhnoor- 181201 C/o 56 APO
SPL REPAIR TO BLDG NO P40 COOK HOUSE AT 11 MED REGT AND BLDG NO T01 T08 T25 T26 T56 AT KV NO 01 IN AKHNOOR UNDER GE N AKHNOOR
2024_MES_647231_1
CANO- GE(N)/AKH-73/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Akhnoor
Class D Cat a i
8 documents required · 8 mandatory
₹500
GE (North) Akhnoor
₹84,500
Yes
23 Jul 2024
20 Mar 2024
24 Apr 2024
20 Mar 2024
17 Apr 2024
3 Apr 2024
Amount
Taking down of old existing tarfelt, water proofing membrane including roof tiles, cement mortar screed, concrete base of any thickness and roughing surfaces to receive roof treatement including removal of debris from the site, complete all as specified and as directed.
Rendering 15 mm thick in cement and sand mortar 1:3 on roof surfaces with mixing of water proofing admixture as per manufacturer's instruction including finishing the surface even and fair to receive roof treatment, complete all as specified and as directed. Note:- Supply only Water proofing compound shall be measured & paid seperately.
Supply only liquid water proofing admixture conforming to IS 2645-1975 of approved make complete all as specified and directed.(Dosage- @ 200ml per 50Kgs of Bags of cement)
Water proofing treatment to RCC roof slab including parapet as under :- (a) Ist Course : Apply a coat of bituminous primer conforming to IS-3384@ 0.40 Kg /Sqm on prepared surface of plaster and after drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm on plastered surfaces. (b) 2nd Course : APP (Atactic Polypropylene) modified polymeric membrane, 5 layered, 3 mm thick weight not less than 3.0 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 150 mm end overlap, membrane has to be laid with LPG torch and overlap sealed and finished neat, all joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying of membarance. (c) 3rd Course : Apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm over membrane and dusted with dry sand @ 0.50 to 1 Kg/sqm. Note:-(i) The water proofing treatment shall be got carried out from the authorised personal of the Company all as specified and directed. (ii) For non-accessible roofs : Top surfaces of roof after carrying out treatment as specified here-in-above shall be provided with 2 coats of aluminium paint over a coat of primer as per manufacturer’s instructions.
PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in roof kerb, padding , finished surface even and fair, complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed.
Dismantling asbestos cement (corrugated, semi corrugated) sheets including ridges as in roof covering, complete all as speciified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any type and any thickness including cover fillets/GI grid frame work complete all as specified and directed.
Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W (Gde E-250), quality 'A' complete all as specified and as directed.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
Pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
GI frame work with size of grid 605mm x 605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and including celing section (n.exc 1.2m length) of 0.55mm thickness having kruled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 centre to centre with support of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and including 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface in G.I. metal frame work reinforced with G.I. wire mesh incl preparation the surface and applying two coat plastic emulsion paint over one coat of primer over one coat putty complete all as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, culverts,etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed .
Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified.
15mm thick cement plaster rendering in CM 1:4 on fair faces of brick or concrete surfaces including mixing of WPC admixture as per manufacturer's instruction & finishing the surface even and smooth without using extra cement, complete all as specified. (Note:- WPC admixture shall be measured and paid separately)
Rendering 15 mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed.
Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
Preparation on old plastered surfaces of walls and applying two coat of oil bound distemper over a coat of 2 mm thick wall putty after complete removal of existing surface of any layer complete all as specifieed and as directed.
Preparation on old plastered surfaces of ceiling and applying two coat of white wash including complete removal of existing treatment complete all as concerned and directed.
Preparation of old painted surfaces with complete removal of existing treatment & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall complete all as specified and directed.
Preparation of newly plastered surfaces & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall, complete all as specified and directed. Note for item No-28 & 29:- (i) The work shall be carried out in different shade and the same shall be got approved from Engineer-in-charge/GE/ (ii) The work shall be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.
Dismantling of stone slab and tiles of any description or thickness in floor apron etc laid or bedded in any mortar complete all as specified and directed.
20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. (Size of Kota Stone slab shall not to be less than 53 cm x 53 cm).
Description all as per item No 28 above but in skirting/dado incl 10mm thick rendering CM 1:4 complete all as specified and directed.
Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.
Glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick rendering in CM 1:4 finished even and fair to receive tiles, complete all as specified and directed.
20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking platform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and moulding the edges, complete all as specified and directed.
Providing cement concrete type C-1, 1:3:6 ( using 20mm graded crushed stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight), complete all as specified and as directed.
40mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base/ floor finishing surface even and fair, complete all as specified.
Repair to balcony/facia and soffit of chajjas etc by taking down old plastered surfaces and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqcm in width or girth & applying rendering 15 mm thick dubbing coat where required to match with the existing thickness in CM 1:4 including formwork/scaffolding work upto height 7.00mtr above ground level of bldg complete all as specified and as directed.
Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) n.exc 1.50 sqm complete all as specified and directed.
Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each, complete all as specified and directed.
Mild steel framed work as in door or gate of angle or other section with gusset plate, rail braces complete drilled for fixing of steel sheeting or other covering . door etc to be prepared for hanging of sliding with grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-410-W(Gde-E-250) quality-B, complete all as specified and directed .
Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick flat iron projecting 10 cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified & directed.
Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified & directed.
PCC 1:3:6 type C-1 (Using 20mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed.
Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed.
35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, complete all as specified.
35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.
Prelaminated particle board 12mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in repairs with screws to timber frame work, complete all as specified and directed.
Pre laminated particle board 18/19mm thick, exterior grade, laminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame and necessary item like hasp and staple , in repairs as cupboard/Almirah shelve and shutter, complete all as specified.
External teak wood lipping 6 mm thick fixed with nails for 18/19 mm thick board, complete all as specified.
Sheet glass ordinary quality, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and as directed.
Figured glass sheet, 4mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.
Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.
100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.
Butt hinges of size 75 mm medium weight for rolled fixed as in cupboard welded with angle iron frame complete all as specified and directed.
150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.
Aluminium handles cast type anodised of size 100mm long ISI marked with screws complete all as specified and as directed.
300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.
300mm Mild steel ordinary rat tail helical door springs including roller and roller plate fixed, complete all as specified.
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length of cover plate 100mm , all as specified and directed.
Curtain rail ,20 mm dia Stainless steel ,chromium plated fixed with CP bracket, incl taking down of old curtain rods, complete all as specified.
Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & gauged shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 . Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid separately under respective item
S&F factory made box type steel ventilators top hung shutter shutters glass/glazed including guard bars ,hinges,steel handle,tower bolt and steel peg stay,complete with or without glazing bars ,devotiled or welded,including one coat of red oxide primer complete shown as drawing No (CEUZ/TD/1517/15 Sh No 1/3 to 3/3)
Preparation new steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and as directed.
Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of Ist quality over a coat of pink primer, complete all as specified and as directed.
Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'S' trap fixed in repairs complete all as specified and as directed. Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make NEYCER, CERA, PARRYWARE as approved by GE.
PVC valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified and as directed.
Vitreous china WHB (White) of size 550X400mm including waste fittings chromium plated brass ,CP steel chain and rubber plug,procelain stopper ,and pair of CI brackets, waste pipe fixed as in repair complete all as specified and as directed.
Pillar tap of 15mm bore dia fancy type capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and directed.
PVC connection 15mm size with PTMT nuts of length 600mm size complete all as specified and directed.
Angle valve/stop cock of cast copper alloy chromium plated fancy type (ISI Marked) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore fixed in repairs complete all as specified and directed.
Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, fixed in repairs complete all as specified and directed.
CP Brass wall mixture with Telephonic shower arrangement for mixing hot and cold water supply screwed down incl connecting legs & wall flanges for iron pipe 15mm dia bore fancy type as in repairs complete all as specified and directed.
Glass corner shelf assembly consisting of 5.5 mm thick sheet with chromium plated bracket guard and railing 45 cm long complete all as specified and directed.
Chromium plated brass towel rail 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed.
Brass chromium plated shower roses 125mm with or without swivel joints, including fixing to steel pipe or union fixed in repairs all as specified and directed.
Plate rack made of stainless steel 0.8mm thick overall size 786mm x 610mm x 254mm fixed in repairs complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel (1mm thick) kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm as approved, complete all as specified and directed.
Supply & fixing in repair bath cabinet of size 360mmx450mmx90mm deep with glass of size 320mmx450mmx3mm thick (Make : Prayag (Symet) or equivalent make as mentioned in list of make to P.S as approved complete all as specified and as directed.
Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.
Description all as per srl Item No-79 above, but 20 mm bore.
Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
Description all as per srl Item No-81 above, but bore of pipe 20mm .
Rotational moulded polyethylene water storage tanks of 500 litres capacity, three layered (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc. with & including "dismantling water tank exc 250 ltr and not exc 500 ltr in capacity and removing from site, complete all as specified.
Rotational moulded polyethylene water storage tanks of 1000 litres capacity, three layered (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc. with & including "dismantling water tank exc 500 ltr and not exc 1000 ltr in capacity and removing from site, complete all as specified.
Ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20mm dia bore, complete all as specified.
20mm bore gun metal glove or gate valve with iron wheel head screwed bith end for iron pipe and fixed in repairs, complete all as specified and as directed.
Taking down eaves gutters and rain water pipe , soil and waste pipe PVC or CI (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc all as specified and directed.
110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints fixed to wall etc., complete all as specified and directed.
75mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints fixed to wall etc., complete all as specified and directed.
PVC SWR branch piece, 110 mm single (single Y) equal or unequal complete all as specified and directed.
110mm dia PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and directed.
PVC (SWR) bends any radius 75mm bore, complete all as specified.
PVC (SWR) branch piece 75mm bore (single) equal or unequal ordinary or inverted (spigot or socket type) fixed in repairs all as specified and directed.
PVC SWR branch piece 75mm bore single (single Y) equal or unequal ordinary or inverted (spigot or socket type) all as specified and directed.
PVC (SWR) vent cowl for 75mm dia fixed, all as specified.
PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement, fixed in repairs, complete all as specified.
Supply only Hasp and staple safety type of size 75mm complete all as specified and as directed.
100mm thick Plain Cement Concrete as in sub base type E2 (1:5:10) using 40mm graded stone aggregate complete all as specified and directed.
25mm thick sand cushion in flooring below interlocking tiles complete all as specified and directed.
Machine pressed concrete interlocking paver block any shape, size and colour confirming to IS 15658-2006 of 60mm thickness, M-40 grade with grey cement and pigment over sand cushion complete all as specified and directed. Note:- Sand cushioning shall be measured & paid seperately.
Chequered cement concrete tiles 300mmx300mmx 25mm thick laid & jointed with grey cement and pointed in neat cement slurry mixed with with pigment as in part/hardstanding laid over & including15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes all as specified and directed.
Demolition and breaking up drain pipe 150mm dia (salt glazed ware, AC, PVC or reinforcement concrete) set in cement mortar/concrete complete all as specified.
Demolition of reinforced cement concrete of any description and in any position including cutting reinforcement as required to facilitate complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying under ground cable, erection of poles etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out etc in any type of soil, complete all as specified and directed.
PCC 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles including necessary form work complete all as specified and directed.
Concrete bed to drain pipes in PCC 1:3:6 type C-2 (Using 40mm graded crushed stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested for 150mm internal dia of pipe, complete all as specified and directed.
RCC class NP3 150mm dia drain pipes laid in trenches and jointed with & including coller complete all as specified and directed.
Precast cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed.
TMT bars, 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified.
Returning filling in including spreading watering and well ramming in layers not exc 25 cm complete all as specifed .
Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .
Excavation in post holes each not exceeding 0.5 cum getting out in any type of soil, returning, filling in, including spreading, leveling, watering and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering, complete all as specified.
4mm thick prelaminated designer ceiling board over & including GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm fixed along wall perimeter, main runner 'T' of size 25x40x3mm , secondary runner 'T' of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels, complete all as specified and as directed.
Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete,complete all as specified and directed.
Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed/base in cement and sand mortar 1:6, complete all as specified.
Description all as per Item No 115 above, but in skirting/dado over and including 10mm thick rendering in CM 1:4.
Rolled mild steel section as in main and cross beams, hip and jack,rafters, purlins, where connected to common, rafters and running rails and guiders for sliding doors: fixed with angle cleats or other connecting plates conforming to grade Fe410-W (Gde E-250) quality 'A' complete all as speciified and directed.
Preparation of old wooden surfaces of any description exc 10 cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of old steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Mild steel pressed handle 150mm long oval type stove enameled black complete all as specified and as directed.
Rendering 10mm thick in cement mortar 1:6 on fair faces of bricks work or stone surfaces and finished the surface even and smooth without using extra cement, complete all as specified and as directed.
GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required all as spd and directed.
Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.
Preparation of old surfaces including washing, rubbing down and stopping of distempered/ painted surfaces and applying two coat of cement base paint to walls complete all as specified and directed.
Complete removal of existing old treatment ( layer incl old cement based paint,white wash,weather coat exterior paint etc) of walls upto plaster level with machanical means incl cleaning,washing,rubbing etc and applying two coats of exterior emulsion paint (weather proof Apex paint only) over a coat of approved primer complete all as directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.
Preparation of old existing surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.
Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.
Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 in half brick thick, complete all as specified.
Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.
Point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular steel box, top cover plate, blank plate, screws,washers to be used of same make/brand only and shall be deemed in to included in quoted rate only.)
One light point/fan /exhaust fan/bell point controlled by one switch.
One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .
One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .
Point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 2.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed Note- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all fittings are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)
One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board.
One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.
Modular type switch 10 Amps, single pole,1way,1/2 module,240V, ISI Marked complete all as specified and directed.
Modular type switch 16 Amps, single pole, 1way,1 module, 240V, ISI Marked Complete all as specified and directed. Make- Crabtree (Havells) or its equivalent in Anchor (Roma), Legrand, Seimens as approved”.
Modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module, 240V, AC ISI Marked Complete all as specified and directed. Make- Crabtree (Havells) or its equivalent in Anchor (Roma), Legrand, Seimens as approved”.
Modular type socket 6 A/16 Amps, 2/3 Pin combined shuttered socket 2 module with light indication ,240V,AC ISI Marked Complete all as specified and directed . Make- Crabtree (Havells) or its equivalent in Anchor (Roma), Legrand, Seimens as approved”.
Fan regulator modular type electronic compatible with BLDC fan, stepped type 100 Watts, 2 module 240Volts, AC ISI marked complete all as specified and directed. Make- Crabtree (Havells) or its equivalent cat part of make Anchor (Roma), Legrand, Seimens as approved by GE”.
Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.
Ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed
LED light fitting decorative box type 20 watt, 4 feet, 85% energy efficiency,0.9 PF, inbuilt driver, pre-wired and connecting up with twin core twisted copper wire from LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Cat Part No-BS20WLED 830 SPCSS of Havells or its equivalent of Bajaj, Crompton, Orient as approved.
LED light fitting decorative box type 10 watt, 2 feet, 85% energy efficiency,0.9 PF, inbuilt driver, pre-wired and connecting up with twin core twisted copper wire from LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Cat Part No-BS10WLED865 SPCSS of Havells or its equivalent of Bajaj, Crompton, Orient as approved.
Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete incl testing after fixing all as specified and directed by Engr-in-Charge . The specification of the light fitting should meet the following. (a) Housing of light fitting: Aluminum Extruded. (b) Operating voltage: 150V to 270V. (c) Operating temperature: 10 to 45 degrees. (d) Lumen efficacy: 100 lumen per watt. (e) System lumen: Not less than 900 Lumens. (f) Colour temperature: Not less than 5700K. (g) Surge voltage protection: Up to 2 KV. (h) Ingress protection: IP20. (j) Total harmonic distortion: Not less than 20%. (k) Power factor: Not less than 0.90. (l) Input frequency: 50 HZ. (m) Line protection: Under/Over voltage protection. "Cat part No LL20-111-XXX-65-AL1 of Wipro, or its equivalent in Havells, GE, Phillips”
LED INVERTER batten 18w/20w decorative box type light fitting,charging time 10 hour,emergency backup time 4 hours,Driver efficiency >/= 85% energy efficiency,0.95 PF, inbuilt dry battery & driver,pre-wired,rated voltage 230Volts,50Hz and including providing PVC/Wooden solid round/square block -02 Nos and connecting up with twin core twisted copper wire from LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Make :- Halonix cat No. HLB-08-20-CW-INV or its equivalent in Bajaj, Surya as approved.
LED bulb 9 watts, 240Volts,50Hz pin type and including removing old unserviceable item complete all as specified and directed. Cat Part No-LHLDEUEEML8R009 Havells or its equivalent in Bajaj, Surya as approved.
LED secruity light fitting of capacity 20 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with suitable inbuilt surge protector and cable connection from ceiling rose to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make-Havells Cat Part No-.ENDURAPEARLSL20WLED 757SASYTOPCMP or its equivalent in Bajaj, Surya as approved.
Supply & fixing and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 8 way for flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 200Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 36 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand cat Part No. 5076 21 8 way / Hager cat Part No.VYS08G / L&T Cat Part No:-DBSPN008GD as approved
Supply & fixing and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 8 way for flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand cat Part No. 5076 21 8 way / Hager cat Part No.VYS08G / L&T Cat Part No:-DBSPN008GD as approved
MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked fixed in repairs complete all as specified and directed. Make:- Legrand cat No.4085 87 to 4085 95 / Hager Cat Ref No.NCN106N to NCN132N / Havells Cat No.DHMGCSPF006-032 as approved
MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked fixed in repairs complete all as specified and directed.Make:- Legrand cat No.4086 17 to 4086 18/ Hager cat part No:- NCN232N /Havells cat part No.DHMGCSNF040 / L&T cat part NoBB20400C as approved
Sub main wiring in replacement complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour code and applying putty including cutting and chiseling and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as RM.
Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron and light grade protection pipe of 40 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh, including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45cm x 45cm x 45 cm,RCC cover 1:2:4 type B1 of size 45x45x6 cm, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed. Note:- The required resistance of Earthing shall be less than 3 ohm, If not found to the required resisstance, the contractor has to re earthing for required resistance and the cost for the same included in the quoted rate and no extra shall be paid on failure of getting required resistance.
Exhaust fan single phase metal body, AC 230 Volt, 50 Hz, 900 RPM of size 300mm sweep with louvers shutter complete with all accessories including connecting up from ceiling rose complete all as specified and directed. Make:- Cat part No:- Turbo Force 1P Grey of Havells or its Equivalent cat part of make-BAJAJ,CROMPTON GREAVES, GEC, KHAITAN,ORIENT as approved by GE
Exhaust fan single phase metal body, AC 230 Volt, 50 Hz, 900 RPM of size 250mm sweep with louvers shutter complete with all accessories including connecting up from ceiling rose complete all as specified and directed. Make:- Cat part No:- Turbo Force 1P Grey of Havells or its Equivalent cat part of make-BAJAJ,CROMPTON GREAVES, GEC, KHAITAN,ORIENT as approved by GE
Ceiling fans complete with blades, down rods, and accessories, 230 volt, 1200mm sweep, min air delivery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make:- Cat Part No Zinger of Make Havells or its Equivalent cat part of make as specified in list of make here- in after. Note : Items declared BER vide convening order No 4000/CO/BPs/465/E4 dated 21 May 2022 already deposited with MES/ E&M yard.
GI bracket pipe of size 40 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including suitable fabricate MS flat iron clamps of 25X6 mm thick -02 Nos suitable for fixing any places with nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed. Note :- Make of GI pipe Jindal/Tata/ Prakash Surya in any approved
Taking down old unserviceable water storage heater of any type /capacity and including deposit to MES yard for safe custody and supply and fix of water storage heater (Geyser) of 25 ltrs capacity, vertical type with copper inner tank,heating element,thermostat, indicating lamps,pressure release valve / safety valve suitable for working on 240 volts, AC, 50Hz,ISI marked, 5 star rated and fixing on wall including providing hole fastners-04 nos and fixing arrangements such as including necessary plumbing work,PVC hot and cold water pipe etc complete all as spcified and directed. Make:- Venus /Havells /Racold Model No.ER25V/ Bajaj Model Majesty 25L GMH(RW) or equivalent in approved.
GI tubing medium grade of 25 mm dia in bore all necessary GI fittings like bends, elbow, unions, tees, sockets, short pieces, plugs, hooks/clamps etc. as required at site and laid in trenches as specified and directed.
Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 25 mm, supplied and fixed in repairs complete all as specified.
Taking down burnt cable and Supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor, 1100 Volt grade, cross sectional area 16 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.
GI pipe light grade 40mm bore for cable protection fixed on pole or liad in trenches under floor,ducts etc with fixing clamps, nuts, bolts etc., complete all as specified.
Protection to cable with one layer of brick laid flat across the length of cable using old size sub class 'B' Bricks, complete all as specified and directed .
Sand cushioning to under ground cable, 8 cms thick before laying the cable and 15 cms thick after laying and stretching the cable in trenches including hand punning and consolidating, punned to 18cm thickness, complete all as specified and directed. Note : For payment purpose, only punned thickness shall be measured.
Sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked) cable 1100 volts grade,FRLS type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLS type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface including cutting and cheasing and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.
Modular type switch 6 Amps, single pole, 1 way, 1 module,240V with cover plate, ISI Marked Complete all as specified and directed. Make- Crabtree (Havells) or its equivalent in Anchor (Roma), Legrand as approved”.
Modular white cover plate with frame 3 module complete all as specified and directed.
Modular white cover plate with frame 4 module complete all as specified and directed.
Modular white cover plate with frame 6 module complete all as specified and directed.
LED lamp retrofit type 12 watt B22 base holder with polycarbonate body and heat sink type fixed in repairs complete all as specified and directed.
20 Watt LED batten/inverter capacity having charging time 8 hours, driver efficiency > 85% , power factor > 95% and operating voltage 270 volt with suitable size nuts, bolts, washers etc. and making the connection from ceiling rose to fitting with suitable size twin core copper conductor cable fixed in repairs complete all as specified and directed . (Make- Havells, cat part No LHEXACP7FN1W020 or Bajaj/Philips/Crompton Greaves or its equivalent).
35 Watt LED energy saving light fitting environment friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 with GI bracket made of light grade GI pipe 40 mm dia of 1.2 mtr long bend to shape with 02 Nos of FI clamp 32 x 4mm with suitable size nuts, bolts, washers etc. and making the connection from ceiling rose to fitting with suitable size twin core copper conductor cable fixed in repairs complete all as specified and directed . (Make- Havells, cat part No ENDURAPEARLSL35WLED757SASYTOPCMP or Bajaj/Philips/Crompton Greaves or its equivalent).
MCB's single pole & neutral 240 volts 40 to 63Amps 10 KA 'C' series, all as specified and as directed. Make: Havells Cat Part No.DHMGCSNF040-063 or its equivalent cat part of make-Legrand / ABB / L&T as approved by GE
Single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB of capacity 20 amp 240 volts and connecting electrically including taking down unserviceable enclosure with U/S MCB complete all as specified and directed.
PVC insulated stranded aluminium conductor (XLPE) served with an inner sheathing of PVC tape, PVC sheathed armoured with galvanized steel wire of type (heavy duty) under ground electric cable 1100 volt grade of cross sections area of 16 Sqmm 2 core
M/S Mahajan Construction Co.
NISHANT SHARMA
M/S KARAN SINGH CONTRACTOR
CHOPRA CONSTRUCTIONS
M/s Vishwakarma Enterprises
harish kumar and co
M/S JEEVAN LAL SHARMA
M/s Sekinder Paul Sharma
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .