175 H(F)(W)/2023-24

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

G.I. Pipe 6'' dia

Copper L Piece for 400 KVA Transformer

Copper L Piece for 1000 KVA Transformer

Aluminum Lug (Long Barrel)

Holding Clamp with Nut and Bolt

Tainless unit

Nut & Bolt

L.T. Clamp with Nut and Bolt

Aluminium lug for 150 sqmm

Aluminium lug for 240 sqmm

Aluminium lug for 400 sqmm

33 KV Control Pannel Relay

W.T.I. Complete Set

O.T.I. Complete Set

Control Cable 4 Core 2.5 sqmm flexbile Core

24 Volt Charger

24 Volt DC Battery

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 20 Kms. (distance approx)

PCC POLE 8.5

ST Pole 11 Mtr. Long

ST Pole 09 Mtr. Long

33 KV Control Pannel for Double Transformer

11 KV XLPE Cable 3x185 sqmm

11 KV indoor Cable Jointing kit 3x185 sqmm

11 KV outdoor Cable Jointing kit 3x185 sqmm

AB Cable (3x120+1x95+1x16)

L T XLPE Cable 1x630 sqmm

L T XLPE Cable 1x400 sqmm

LT XLPE Cable 1x240 sq mm

LT XLPE Cable 3.5x240 sqmm

ACSR Weasel Conductor

ACSR Rabbit Conductor

Three Phase Distribution Box

T/F 100 KVA

T/F 250 KVA

T/F 400 KVA

Other matching Materials

Dragging of ST/PCC Pole from dump site to pit site

Fabrication and Errection of Double Pole Support PCC/ST on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Single Pole Support PCC/ST on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Stringing, Sagging, Binding and jumpering of ACSR WeaselConductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of ACSR Rabbit Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Cable (3x120+1x95+1x16) sqmmq Conductor as per RESSPO Norms

Grouting and Binding of Stay with in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Mounting of 100 KVA Transformer as per RESSPO Norms.

Mounting of 250 KVA Transformer as per RESSPO Norms.

Mounting of 400 KVA Transformer as per RESSPO Norms.

Installation of 33 KV CT 400/200/1

Laying of underground 11 KV 3x185 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Indoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Construction of Transformer Plinth size 2x2x1.5 including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

FRP Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Repairing of Transformer Plinth (All Material is Provided by Contractor)

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Installation of 33 KV Control Pannel for Double Transformer

Connection of L.T. XLPE Cable Different Size & Different Places

Erection & Commissioning of of 3 Phase/Single Phase Distribution Box with help of clamps (Cost of clamp & Bolt & Nuts shall be borne by contactor ) as per Norms.

Rect Back 63 KVA T/F

Rect Back 100 KVA T/F

Rect Back 250 KVA T/F

M/S S K ASSOCIATES

M/S SATYAM TRADING COMPANY