REPAIR REPLACEMENT AND MAINTENANCE TO INTERNAL WIRING INCLUDING FITTING AND FIXTURE AT OTM ACCN REPAIR MAINTENANCE OF CEILING FAN EXHAUST FAN AND ALLIED WORKS INCLUDING REPAIR REPLACEMENT AND MAINTENANCE OF WINTER APPLIANCE COOLING APPLIENCES AND MIS

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as specified and directed.

Material and Labour for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits) with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No. and including medium grade PVC conduit concealed on wall/floor etc, ISI marked with suitable accessories , GI sunken box of 1.2 mm thick and 60 mm deep,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc also chisselling on wall complete and making all good the disturbed work to matching the existing surfaces / wall by cement mortar 1:4 with painting to match existing and including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for following complete all as specified and directed.

(a) One light point controlled by one switch

(b) One Fan point controlled by one switch

(c) One 5 pin 6 Amps socket outlet on independent board.

(d) One 5 pin 6 Amps socket outlet on same board.

(e) bell /buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sqmm size.

(f) one light point controlled by two way switch.

All as per item No 01 here-in-before but wiring with 2.5 sqmm single core multi stranded copper conductor 1100 v grade PVC insulated but unsheathed copper conductor FRLS cable 1100 volts grade and 2.5 sqmm PVC insulated but unsheathed FRLS cable as earthwire for 16 Amps power point on independent board complete all as specified and directed.

Supply and Fixing in repair switch piano type, one way, 6 Amp complete all as specified and directed.

Supply and Fixing in repair switch piano type 16 Amps complete all as specified and directed.

Supply and Fixing in repair Bell push, flush type, 6 Amp complete all as specified and directed.

Supply and Fixing in repair switch piano type two way 6 Amps complete all as specified and directed.

Supply and Fixing in repair socket outlet 2 in1, 3 pin 5 Amps complete all as specified and directed.

Supply and Fixing in repair socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type complete all as specified and directed.

Supply and Fixing in repair switch socket combination 2 in 1, 3 pin, 6 and 16 Amps flush type complete all as specified and directed.

Supply and Fixing in repair switch socket combination 2 in 1, 3 pin, 6 Amps flush type complete all as specified and directed.

Supply and Fixing in repair switch socket combination 2 in 1, 3 pin, 5 and 15 Amps Box type complete all as specified and directed.

Supply and Fixing in repair switch socket combination 2 in 1, 3 pin, 5 Amps Box type complete all as specified and directed.

Supply and Fixing in repair switch modular type, one way, one module 6 Amp complete all as specified and directed. Make :- Anchor

Supply and Fixing in repair switch modular type, one way, one module 16 Amps complete all as specified and directed. Make :- Anchor

Supply and Fixing in repair modular switch Bell push, flush type, 6 Amp complete all as specified and directed. Make :- Anchor

Supply and Fixing in repair switch modular type, one module, two way 6 Amps complete all as specified and directed. Make :- Anchor

Supply and Fixing in repair modular socket outlet 2 in1, 3 pin, 2 module, 6 Amps flush type complete all as specified and directed. Make :- Anchor

Supply and Fixing in repair modular socket outlet 2 in 1, 3 pin, 2 module 6 and 16 Amps flush type complete all as specified and directed. Make :- Anchor

Supply and Fixing in repair Modular switch socket outlet 3 pin, 16 Amps flush type complete all as specified and directed. Make :- Anchor

Supply and Fixing in repair switch socket combination 3 pin, 6 Amps flush type complete all as specified and directed. Make :- Anchor

Supply and Fixing in repair PVC ceiling rose surface type three terminals type complete all as specified and directed.

Supply and Fixing in repair Buzzer / ding dong AC 230 volts, 6 Amp single Phase in white /Ivory colour finish complete all as specified and directed.

Supply and Fixing in repairs Single pole and neutral enclosure with a metal two pin and earth plug and metal clad socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Supply and Fixing in repairs surface and wall mounted Regal Batten with including T8 tube rod energy efficient 20 W LED (four feet) complete in all respect complete all as specified and directed. Make : Havells/ Wipro/ Philips

Supply and Fixing in repairs surface and wall mounted LED T5 integrated batten Batten with integrated electronic driver energy efficient 10W LED (Two feet) decorative complete in all respect complete all as specified and directed. Make : Havells/ Wipro/ Philips

Supply and Fixing in repair square 600 mm X 600 mm, 36 Watt Reccesse mounted bottom opening LED fitting including, LED Lamp with powder coated CRCA housing and polycarbonate diffuser, LED Fixture system wattage 36Watt to 42 Watt, 140V to 260 V AC ,System lumen out put min 3600 lumen in 36 w and with 5700 to 6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark and Registration no. complete all as specified and directed. Make : Havells equivalent in Crompton / WIPRO/ Philips

Supply and Fixing in repair square 600 mm X 600 mm, 36 Watt Surface mounted bottom opening LED fitting including, LED Lamp with powder coated CRCA housing and polycarbonate diffuser, LED Fixture system wattage 36 Watt to 42 Watt, 140V to 260 V AC ,System lumen out put min 3600 lumen in 36 Watt with 5700 to 6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark and R Registration no. complete all as specified and directed. Make : Havells equivalent in Crompton / WIPRO/ Philips

Supply and Fixing in repair 20 Watt ultra bright glass LED Tube Rod of size 4 ft complete all as specified and directed. Make: Havells/ Wipro/ Philips

Supply and Fixing in repair wall mounted extruded PVC housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4' long) lumen 2000 to 3000, PF> 0.9, THD less 10% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement complete all as specified and directed. Make : Havells or equivalent in Crompton / Wipro/ Philips

Supply and Fixing in repair New genration energy saving environment friendly long life LED street light 60/90 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seprate driver compartment with IP66 Protection and impact resistance of IK07 Building security lights complete all as specified and directed. Make : Havells/ Wipro/ Philips

Supply and Fixing in repair Recess/ surface mounting LED edgelit slim round down lighter made of PDC AI. With high efficient LEDs and glare free Opal diffuser, IP 20. Cat Part :- HLDLR-R06-22-CW complete all as specified and directed. Note:- Size of LED fitting will be considered as per ground requirement.

Supply and Fixing in repair Plano Surface 4x1 G2 Version, 36 Watt Recess mounting LED Light fitting including Suspended Chain arrangement with neccessary fixture,LED Lamp with CRCA housing White powder coated finish and polycarbonate diffuser, LED Fixture system wattage 36 watt, 140 V to 270 V AC,System lumen out put min 3600 lumen in 36 watt with 5700 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV surge protection in Built complete LED fixture with BIS Mark and R Registration no. complete all as specified and directed. Make Cat Part-PLANOSUR4X1PLS36LED857G2S or equivalent PHILIPS/WIPRO

Supply and Fixing in repair Suspended Architectural LED 40 Watt fitting with CRCA white powder Coated housing high quality indoor batten LED tube 40 watt colour temperature 5700 K (4' long) lumen 3700 to 4100, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement complete all as specified and directed. Make Cat Part- CONSTA 1144LP40WLED857SPCWH or equivalent PHILIPS/WIPRO/Crompton

Supply and fix in repair of LED Driver suitable for recess mounting LED Light fitting 32W to 42W watt of (any Make) 600 mm x 600mm size complete all as specified and directed.. Make : Crompton / bajaj/ Havells/HPL/Syska

Supply & fix in repair PIR Motion sensor of detection range 360 , detectction distance more than 6 mtr, installation height 2.5 mtr to 4 mtr and detection movement speed .06 to 1.5 m/s including necessary wiring with 2.5 sqmm three core multi stranded copper condcutor 1100 v grade from light/ main board to sensor complete all as specified and directed. Make Crabtree: Product code ACSBA005 equivalent

Supply & fix in repair PIR surface mounted Motion sensor of detection range 360 , detection distance more than 20 mtr,installation height 2.5 mtr to 6 mtr and detection movement speed .06 to 1.5 m/s including wiring with 2.5 sqmm three core multi stranded copper condcutor 1100 v grade from light/ main board to sensor complete all as specified and directed. Make Crabtree: Product code ACSBA003 or equivalent

Supply and Fixing in repair sheet metal enclosure MCB DB VTPN 12 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and directed. Make- Standard, Indoasian,L&T

Supply and Fixing in repair sheet metal enclosure MCB DB TPN 8 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system complete all as specified and directed. Make- Standard, Indoasian,L&T

Supply and Fixing in repair sheet metal enclosure MCB SPN DB with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and directed of following Size. Make- Standard, Indoasian,L&T

(a) SPN DB 8 way

(b) SPN DB 4 way

Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into and including PVC conduit of size 25 mm dia including 2.5 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed.

Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into and including PVC conduit of size 25 mm dia including 4 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed.

Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into and including PVC conduit of size 25 mm dia including 6 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed.

Taking down old submain wiring and Material and Labour for sub main wiring with four single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into and including PVC conduit of size 25 mm dia including 4 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed. Note: Four single core cable, earth wire and conduit shall be measured as one length.

Taking down old submain wiring and Material and Labour for sub main wiring with four single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into and including PVC conduit size 32mm of suitable size including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed. Note: Four single core cable, earth wire and conduit shall be measured as one length.

Supply and Fixing in repair MCB TPN rated capacity 63 Amps, 415 volts breaking capacity 16 KA complete all as specified and directed. Make - Standard/indoasian/L&T

Supply and Fixing in repair MCB TPN rated capacity 40 Amps, 415 volts breaking capacity 16 KA complete all as specified and directed. Make - Standard/indoasian/L&T

Supply and Fixing in repair MCB rated capacity 40 to 100 Amps, 415 volts breaking capacity 16 KA ,as Per existing complete all as specified and directed. Make - Standard/indoasian/L&T

Supply and Fixing in repair MCB Single pole and neutral (SPN) rated capacity 40A to 63A , 240 volts breaking capacity 10 KA complete all as specified and directed. Make - Standard/indoasian/L&T

Supply and Fixing in repair MCB Single pole and neutral (SPN) rated capacity 32A , 240 volts breaking capacity 10 KA complete all as specified and directed. Make - Standard/indoasian/L&T

Supply and Fixing in repair MCB Single pole (SP) rated capacity 6 A to 32 A, 240 volts breaking capacity 10 KA complete all as specified and directed. Make - Standard/indoasian/L&T

Supply and Fixing in repairs thermostats ISI marked as required at site for geyser of capacity 25Ltr /35Ltr /50Ltr of any make complete all as specified and directed.

Supply and Fixing in repairs of safety valve/high pressure valve ISI marked as per site requirement and complete all as specified and directed.

Supply and Fixing in repairs heating element of rating 1.5/2 KW as required at site including rubber washers complete all as specified and directed.

Supply and Fixing in repairs of PVC pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 cm long for cold water connection complete all as specified and directed.

Supply and Fixing in repairs metal braided PVC/CP pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 CM long for hot water connection complete all as specified and directed.

Supply and Fixing in repairs, non return valve 15 mm dia of brass, ISI marked complete all as specified and directed.

Material and Labour for refixing of geysers of any capacity to walls by grouting with new nut,bolts and refiixng the geysers at a location with all necessary pipe connections, testing complete all as specified and directed.

Supply and Fixing in repair plug top 16 Amps flush type complete all as specified and directed.

Material and Labour in repair for stop valve , cast copper alloy screw down high pressure crutch handle, screwed both end for iron pipe suitable for 15 mm bore complete all as specified and directed.

Taking down carefully ceiling fan of any make, size from its location,dimantling complete fan ,examine complete parts thoroughly, servicing oiling, greasing all parts and complete overhauling of fan including painting of ceiling fan complete in situ with synthetic enamel paint, white colour by spraying including filling cavities with filler, one coat after cleaning all dust, replacement of small parts such as split pin, nut bolt,screw and assembling complete fan and make fully functional with replacement of old unservicable rewinding with new rewinding of fan, refixing the fan to its original position including replacement of three core PVC insulated multi strandard copper wire 1.5 sq mm 1100 Volts grade from fan connector to ceiling rose complete all as specified and directed. Note : Ball bearing, bush fan blade etc will be measured and paid seperately under relevant item of schedule as supply only.

All as per item No 61 above but Exhaust Fan of sweep 150mm to 350 mm complete all as specified and directed.

Supply only ball bearing(DE/NDE) to match the existing make suitable for 1200/1400 mm sweep ceiling fan including greasing complete all as specified and directed. Make : SKF/NBC or equivalent

Supply only ball bearing to match the existing make suitable for 150mm to 350 mm exhaust fan inclduing greasing complete all as specified and directed. Make : SKF/NBC or equivalent

Supply and Fixing in repair only fan regulator suitable for 1200/1400 mm ceiling fans (electronics step type) complete all as specified and directed. Make-Anchor

Supply only capacitor 2.5 mfd for ceiling fan complete all as specified and directed. Make:Havells/Epcos

Supply only capacitor 4 mfd for exhaust fan complete all as specified and directed. Make:Havells/Epcos

Taking down carefully old unserviceable existing copper strip of size 20 mm x 3 mm and Supply & fix copper strip 20 mm x 3 mm complete with saddles and fixing screws for fitting the strip complete all as specified and directed.

Supply & fix in repair Aluminium strip 25 mm x 3 mm complete with saddles and fixing screws for fitting the strip complete all as specified and directed.

Supply & Fix in repair GI strip 32 mm x 6 mm complete with saddles and screws for fitting the strip complete all as specified and directed.

Material and Labour in repair for Air terminations single pointed Aluminium rod 12 mm dia and 300 mm long with necessary fixing copper wire with copper lugs and suitable nut bolt arrangements on roof complete all as specified and directed.

Supply & fix four pointed ( centre tip 150mm and side spike 75mm) copper spike lighting arrester heavy duty copper rod of size 15 mm dia both end screwed for easy fitment and 1.5mtr long and heavy duty copper base plate duly drilled on four corners of size 75mm x 75mm ,with necessary fixing arrangement on Top/side of pole complete including taking down old complete all as specified and directed.

Supply and fix test point terminal block made out of gun metal or phosphorus bronze size 75mm x 75mm x 25mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex. head screw including taking down old complete all as specified and directed.

Material & labour for fixing of 50 mm bore GI Pipe medium grade galvanised 1.5 mtr. long fixed on wall with proper fixing and clamping of strip & 1.5 mtr to 300mm long copper/Aluminium lightening arrester rod with all fitting and fixed complete to wall or roof top of bldg complete all as specified and directed. (Note: Joints shall be made with welding to get proper conductivity)

Material and labour in repairs for GI earthing complete with GI earth plate 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 3.25 mtr below nor mal ground level) with top edge of the plate not less than 3.25 mtr below normal ground level connected to GI earth strip of size 20 mm x 3 mm by means of bolts check nuts and washers of brass/ bronze all as shown in electrical plate no 3 connecting to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit in PCC 1:2:4 type B1 using 20mm graded stone aggregate, RCC precast cover 1:2:4 type B1 using 20mm graded stone aggregate, GI pipe 40 mm dia (medium grade) and MS funnel, wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal in black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as per the sketch given in particular specification, GI wire suitable size and length for continuity earth wire from test point to main distribution Board etc., complete all as specified and directed. Note:- Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length. All the joints shall be made with welding to get proper conductivity. Rate required deemed to be including excavation by compressor machine or breaker for soft /disintegrated rock to required depth and results of earthing should be below 1 Ohm.

Material and Labour for maintenance/servicing including attending fault on call basis and repairs philiux / Meditech major with standard /LED OT light of capacity (140000Lux or as per exisiting) Make Phililux / Technomed, as prescribed in repairs and maintenance manual, including fixing/replacement of spare parts (if required). The maintenance schedule shall be under of each OT (i) Dismantling the complete OT light fittings (ii) Checking and servicing/repair and maintenance of OT Lights (iii) After the repairing/servicing/Maintenence, reinstallation, realignment of OT fittings Note:-(i) Spares required for above maintenece will be measured and paid separeataly under relevant items of Sch 'A' (ii) Servicing of the above item shall be carried out by the authorized service providers specially for OT light. (iii) Any break down during the contract period should be attended by contractor with in a day.

Supply only diffusers for Phililux major with standard OT light complete all as specified and directed. Make: Philips or recommended by manufacturer or service provider.

Supply only Reflector for Phililum major with standard OT lights complete all as specified and directed. Make: Philips or recommended by manufacturer or service provider.

Supply only Bulb Holder for Phililum major with standard OT light complete all as specified and directed. Make: Philips or recommended by manufacturer or service provider.

Supply only Halogen Bulb 12 V 50 Watts for Philium major with standard OT light complete all as specified and directed. Make: Philipsor recommended by manufacturer or service provider.

Supply only filter glass for Phililum major with standard OT light complete all as specified and directed. Make: Philipsor recommended by manufacturer or service provider.

Supply only Rotary Switch CL 05 for Phililux major with Standard OT light complete all as specified and directed. Make: Philipsor recommended by manufacturer or service provider.

Supply obly Rotary Switch CL 06 for Phililux major with Standard OT light complete all as specified and directed. Make: Philipsor recommended by manufacturer or service provider.

Supply only Condensor CL 01 for Phililux major with standar OT light complete all as specified and directed. Make: Philipsor recommended by manufacturer or service provider.

Supply only fuse holder and base for major with standerd OT light light complete all as specified and directed. Make: Philips or recommended by manufacturer or service provider.

Supply only Condensor CL 02 for Phililux major with standard OT lights complete all as specified and directed. Make: Philips or recommended by manufacturer or service provider.

Repair to CVT 12V 250 by replacing following burnt items (i) Internal wiring as per existing size.(ii) Burnt MCB of existing capacity (iii) Replacment of multi tap ,stepdown transformer of existing capacity, (iv) Trial and testing complete all as specified and directed.

Repair to CVT 12V 500 by replacing following burnt items (i) Internal wiring as per existing size.(ii) Burnt MCB of existing capacity (iii) Replacment of multi tap ,stepdown transformer of existing capacity, (iv) Trial and testing complete all as specified and directed.

Supply and Fixing in repair LED Panel with 19 LED bulb yellow and white combination with Teflon coated wire suitable for Modle HOSPI CT 5+5 HEX complete all as specified and directed.

Supply and Fixing in repair Controller touch Panel suitable for Modle HOSPI CT 5+5 HEX complete all as specified and directed.

Supply and Fixing in repair SMPS input 220 V AC output 24 V 5 amp DC suitable for Modle HOSPI CT 5+5 HEX complete all as specified and directed.

Supply and Fixing in repair Hydraulic arm set with base plate suitable for Modle HOSPI CT 5+5 HEX complete all as specified and directed.

Supply and Fixing in repair 30 Minute battery backup system unit suitable for Modle HOSPI CT 5+5 HEX complete all as specified and directed.

Comprehensive maintenance and servicing of Split type Air conditioner / Window type unit of any capacity outer and inner unit both of any make including cleaning the dust from body with blower, cleaning of condenser and cooling coil, checking all connecting including functioning of metal clad socket/DP switch, function of relay, capacitors, overload protector, thermostat, fan motor, fan motor blade/blower drum, main control board PCB, electronic control box, etc, oiling/greasing of fan motor, checking serviceablility, cleaning of the air filter woolen felt & refixing ensuring for air tighting complete, repair and replacement of worn out/unserviceable spares including taking down and refixing, transportation to and from workshop if required and refixing it in its original place after fully servicing including testing and cleaning of area which is made dirty during cleaning & commissioning complete all as specified and directed. Note: (i) Spare parts replaced shall be measured & paid separately under relevant item of this BOQ. (ii) Supply and charging of Nitrogen /Refrigerant gas will be measured and paid separately under relevant item of this BOQ.

Supply only starting capacitor 80 Mfd to 100 Mfd 440 Volts AC, 50Hz for window /split AC of capacity 1.0 TR / 1.5 TR for AC of existing make complete all as specified and directed..

Supply only starting capacitor 120 Mfd 440 Volts AC, 50Hz for window /split AC of capacity 2.0 TR for AC of existing make complete all as specified and directed..

Supply only running capacitor 36 Mfd 440 Volts, 50 Hz AC for window / split type AC of capacity 1.5 TR. complete all as specified and directed.

Supply only running capacitor 50 Mfd 440 Volts, 50 Hz AC for window / split type AC of capacity 1.5 TR / 2.0 TR complete all as specified and directed.

Supply only blower motor capacitor 6 Mfd 440 Volts, 50 Hz AC for window / split type AC of capacity 1.5 TR / 2.0 TR complete all as specified and directed.

Supply only blower motor capacitor 4 Mfd 440 Volts, 50 Hz AC complete all as specified and directed.

Supply only thermostat switch suitable for Air conditioner, water cooler, Deep freezer and Refrigerator operator on single phase 230 volts supply complete all as specified and directed.

Supply only drier filter for AC, water and Refrigerator complete all as specified and directed.

Supply only magnetic contactor as in outer unit of Split type air conditioner as per existing type complete all as specified and directed.

Supply only capillary tubes for the Air conditioner 1.5 Ton / 2 ton and water cooler 40 to 150 Ltrs complete all as specified and directed.

Supply only indoor fan motor of split type AC of any capacity complete all as specified and directed.

Supply only condensor fan motor 1300 rpm, 1/6 Hp, 1/8 Hp, 1/10 Hp for split type Air conditioner outdoor unit of 1.0 Ton/1.5 Ton/2.0 Ton as per existing make and capacity complete all as specified and directed.

Supply only condensor fan motor double shaft 1/4 Hp, 230 Volts AC for Window type AC of 1.0 Ton/1.5 Ton/2.0 Ton (indoor unit) as make and capacity complete all as specified and directed.

Supply only condensor fan motor double shaft 1/5 Hp, 230 Volts AC for Window type AC of 1.0 Ton/1.5 Ton/2.0 Ton (indoor unit) as make and capacity complete all as specified and directed.

Supply only condensor fan motor double shaft 1/6 Hp, 230 Volts AC for Window type AC of 1.0 Ton/1.5 Ton/2.0 Ton (outdoor unit) as make and capacity complete all as specified and directed.

Supply only condensor fan motor double shaft 1/8 Hp, 230 Volts AC for Window type AC of 1.0Ton/1.5 Ton/2.0 Ton (outdoor unit) as make and capacity complete all as specified and directed.

Supply only remote control unit of Split type AC 1.5 Ton / 2.0 Ton including making frequency arrangement of new remote with existing system complete all as specified and directed.

Supply only Electronic PCB unit for main control panel of split type/window type AC of any capacity complete all as specified and directed.

Supply only thermostat switch suitable for Air conditioner, water cooler, Deep freezer and Refrigerator operator on single phase 230 volts supply complete all as specified and directed.

Supply only blower/condenser fan blades as per existing make & type for Air conditioner/water cooler/Deep freezer complete all as specified and directed.

Repair, replacement and supply, install, test & commissioning harmetically sealed New compressor for the following appliances duly charged with fresh freon gas / R-134 for a following items complete all as specified and directed including taking down old u/s compressor. Make: Voltas/Shriram/LG/Godrej/Kirloskar or as per existing make at site.

Split type AC of capacity 1.5 TR complete all as specified and directed.

Split type AC of capacity 2.0 TR complete all as specified and directed.

Water cooler of capacity 40 Ltrs to 80 Ltrs complete all as specified and directed.

Water cooler of capacity 120 Ltrs to 150 Ltrs complete all as specified and directed.

Refrigerator 165 Ltrs to 210 Ltrs complete all as specified and directed.

Refrigerator 210 Ltrs to 310 Ltrs complete all as specified and directed.

Deep freezer upt 200 Ltrs to 400 Ltrs complete all as specified and directed.

Material and Labour for Detecting the gas leakage with the help of nitrogen gas, rectifying the defects including repair to condensor coil/evaporator coil by means of welding, soldering etc, vacumizing and charging, topping up fresh freon Gas/ R-22 a and commissioning and testing for the 1.5 Ton/2.0 ton split /window type AC complete all as specified and directed.

All as per item No 116 above, but of water cooler/ refrigerator/ deep freezer of any capacity for servicing and gas charging complete all as specified and directed.

Comprehensive maintenance and service of cold room / walk in cooler unit outer and inner unit both of any make including cleaning the dust from body with blower cleaning of condensor and cooling coil, with castic soda, oiling to motor, cleaning of filter checking all electric connection complete all as specified and directed. Note: Spare parts shall be measured and paid seperately as supply and fixing in repair for the following items

Supply only condensor fan motor 1/36 Hp for water cooler of 40 Ltr to 80 Ltr and Deep freezer up to 400 Ltr as per existing make and capacity complete all as specified and directed.

Supply only condensor fan motor 1/6 Hp, 1/8 Hp, 1/10 Hp for water cooler of 120-150 Ltr as per existing make and capacity complete all as specified and directed.

Supply only capillary tubes for the refrigerator & deep freezer up to 400 Ltr complete all as specified and directed.

Supply only starting relay suitable for water cooler, AC and Refrigerator, Deep freezer for any make and model operated on single phase 230 volts complete all as specified and directed.

Supply only condensor fan motor 1/36 Hp for water cooler of 40 Ltr to 80 Ltr and Deep freezer up to 400 Ltr as per existing make and capacity complete all as specified and directed.

Supply only starting capacitor 10 Mfd 440 Volts, 50 Hz AC for water cooler complete all as specified and directed.

Supply only running capacitor 15 Mfd 440 Volts, 50 Hz AC for water cooler complete all as specified and directed.

Supply only starting capacitor 60 Mfd for water cooler complete all as specified and directed.

Supply only starting capacitor 80 Mfd 440 Volts, 50 Hz AC for water cooler complete all as specified and directed.

Supply only running capacitor 25 Mfd 440 Volts, 50 Hz AC for water cooler complete all as specified and directed.

Supply only for over load relay comprising of over load protection suitable for air conditioner, water cooler, deep freezer and refrigerator operated in single phase 230 volt all as specifed and directed.

Supply only Electronic circuit board for walk in cooler complete all as specified and directed.

Supply only Defrosting timer 40 Amps rating to walk in cooler complete all as specified and directed.

Supply only Solenoid valve for cold room complete all as specified and directed.

Supply only Outdoor unit fan motor as per sample complete all as specified and directed.

Supply only Evaporator fan motor with blade of cold room outdoor unit as per make and model on existing at site complete all as specified and directed.

Material and Labour for replacing unserviceable door lock assembly of cold room existing as per site complete all as specified and directed.

Material and Labour for Replacement of bakelite connector block 30 Amps complete all as specified and directed.

Material and Labour for Replacement of Evaporater coil suitable for Cold room of above size complete all as specified and directed.

Material and Labour for Replacement of Compressor Suitable for cold Room complete all as specified and directed.

Material and Labour for dismantling of existing unserviceable following voltage stabilizer for repairs including replacement of relays, electronic voltage sensor circuits and meter, micro switch, indication light RC filters and other connected items for making functional as per the entire satisifcation of Engr-in-Charge and replace of unserviceable transformer and testing complete all as specified and directed.

Up to 1 KVA

Up to 5 KVA

Disconnecting electrical /mechanically and lowering to the ground for repairing / over hauling the desert cooler including replacement of canvas grass/ wood wool pads and spray painting to body with one coats of anti corrisive red oxide primer for any make of desert cooler to make it fully functional including replacement of unserviceable / defective spare parts, transportation to and from, re-installation and testing on completion to the entire satisfaction complete all as specified and directed. Note: Spares replaced will be measured and paid separately under respective item of this BOQ as supply only.

Supply only water lifting pump 1/70 HP capcity, operated on single phase 230 volts with all accessories and testing complete to the entire satisfaction complete all as specified and directed.

Supply only fan motor of desert cooler of any capacity including supporting legs, nuts and bolts etc. complete all as specified and directed.

supply only fan blade with bush for desert cooler motor complete all as specified and directed.

Supply only electronic control circuit board (PCB) as per existing type for desert cooler complete all as specified and directed.

Supply only swing motor for air cooler complete all as specified and directed.

Supply and Fixing in repair metal plug tops for 2 pin and earth socket AC box of capacity 240 V, 20 A complete all as specified and directed.

Supply only PVC Flexible pipe 25 mm to 30 mm dia as in drain pipe suitable for water cooler outlet including taking down old unserviceable pipe of any size complete all as specified and directed.

Supply and Fixing in repair incl connecting sheet metal encosure with two pin and earth plug and socket complete, with one double pole MCB 20 Amp 240 Volts AC complete all as specified and directed. Make: L & T/Hager/Schnedier

Supply and Fixing in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule for 15mm bore dia complete all as specified and directed.

Supply and Fixing in repair push tap self closing taps of size 15 mm of cast iron or malleable cast iron, galvanised, screwed for iron pipe or for water cooler complete all as specified and directed.

Supply and fix in repair PVC connecting pipe with brass nuts and washers at both ends of length not exceeding 60 cms for connection of water coolers with taking down old pipe complete all as specified and directed.

Material and Labour in repair/ replacement to stainless steel waste water tray including welding, polishing, riveting, provision of fixing screws and refixing complete all as specified and directed.

Material and Labour in repair for Gaskets for top cover for water cooler of any capacity and make as per site requirement complete all as specified and directed.

Taking out unserviceable cooling coil of 165Ltrs /285 Ltrs Refrigerator and Supply and Fixing Cooling coil as per existing make and size complete all as specified and directed.

Supply and Fixing in repairs damage condenser coil for refrigerator of capacity 210 to 300 Ltrs complete all as specified and directed.

Supply and Fixing in repairs door switch for refrigerator of any type and any capacity complete all as specified and directed.

Supply and Fixing in repairs pigmy lamp (indoor lamp) as per existing type for refrigerator complete all as specified and directed.

Supply and Fixing in repairs freezer door as per existing make and type for refrigerator complete all as specified and directed.

Supply and Fixing in repairs timer switch assembly for refrigerator as per existing for capacity 210 Ltrs to 310 Ltrs complete all as specified and directed.

Supply and Fixing in repairs 250 Watt LED Flood Light complete all as specified and directed.