CA CWE/PAT/T-51/2019-20 REPAIR TO PLASTERING FLOORING ROOFING CEILING PLUMBING AND CERTAIN MISC BR WORKS IN ZONE A AND B UNDER AGE BR II GE NORTH PATIALA

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Make : Johnson (Digital HD Tiles) (Barstow DK/LT/HL for Toilets & Verona LT/HL for Kitchens) or equivalent from Kajaria/Somany as approved by AO

Providing and Laying Premium (1st) quality straight edge, ceramic tiles in 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc as approved matching with wall tiles, set & jointed in neat cement slurry & incl and over 20 mm thick screed in cement mortar (1:4) pointed in matching colored polymer cement based grout to match complete all as specified and directed. Make:- Johnson (Digital HD Tiles) (Barstow for Toilets & Verona for Kitchens) or equivalent from Kajaria/Somany as approved by AO

Providing and Laying Premium (1st) quality straight edge, stain free, square vitrified tiles in 600x600x 9 to 10 mm thick in floors/skirtings etc. in approved shade, set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified. Make : Johnson/Kajaria/Nitco/RAK/Somany as approved by AO

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

S&F vitreous china premium/1st quality wall hung wash basin, white, flat back, min. size 500x400 mm , screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified. Make : Cera/Jaquar/Hindware/Parryware as approved by AO

S&F Pillar taps long neck with 450mm long braided hose, fancy type 15 mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed complete in all respect all as specified.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Conventional) or Hindware (Slick) equivalent from Parryware

S&F vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including and taking down existing of any description/size complete in all respect all as specified. Make : Cera/Hindware/Prayag/Parryware

S&F Vitreous china premium/1st quality urinal white colour, of size 330x300x450mm incuding providing and fixing plugs/brackets, bedding urinals against wall in CM 1:2, securing urinal to plug with and including S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass srews/fasteners/rag bolts etc, pointing urinal back in white cement, connecting for discharge pipe including necessary packing, union complete all as specified and incl S&F CP urinal spreader and push button/cock complete all as specified and directed. Make : Cera/Hindware/Jaquar/Prayag/Parryware

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware (Sleek Essence Dual Flush) or Cera (Corona) or Prayag (Vintage) equivalent from Parryware

S&F CP brass jet spray with 1.5M PVC flexible tube complete in all respect all as specified and directed. Make : Prima or equivalent as approved.

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish complete fixed in position all as specified and directed. Make : Modi/Atul/Prayag

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position in repairs complete in all respect all as specified.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position in repairs complete in all respect all as specified.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position in repairs complete in all respect all as specified.

S&F wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15 mm bore connections in repairs complete in all respect all as specified.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed in repairs all as specfied and directed.

S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position in repairs complete all as specified and directed.

S&F cockroach trap gratings AISI-304 of size 150 x 150mm square in shape with 5 mm border complete all as specified and directed. Make : Prayag(FT-31M) or equivalent as approved

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fied in position complete all as specified and directed.

PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction,including all fitting elbow, tees, sockets, bends etc. laid in walls & floors for connecting bottle traps & nahani trap complete all as specified.

M&L cast iron nahani/floor/multifloor trap 100 mm dia including jointing with solvent cement in repair fixed in cement concrete (1:2:4) type B1complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

Taking up or down existing steel tubing and connections, 15mm bore complete all as directed and specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified.

S&F doubled layered rotational moulded polyethylene ISI marked water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified. Make : Sintex/Sheetal/Diplast

Dismantling of asbetos/fibre cement corrugated/semi corrugated sheet in roof covering including ‘J’ or ‘L’hooks complete all as specified.

S&F MS hollow rectangular/square tubes/pipes of YST 310 Grade as in frame work for roofs/sheds/chajjas etc and like similar items including welding/fixed with conn plates etc. complete all as specified.

M & L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge. Make : Asian Paints/Berger/Nerolac

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of Tile Profile having TCT 0.45mm thick, rib height 28mm, Min. G300 Mpa Grade, pitch 200mm with 16mm step depth, of colour as approved as in roof covering, including supply and fixing of ridge of plain sheet of same colour, material and manufacturer fixed with fasteners/screws as recommended by manufacturer complete all as specified. Note : Fixing of sheets will be done strictly according as per manufacurer's instructions. Make : Tata Bluescope/Indian Ispat/ M/S Multi colour steel india Pvt Ltd/ Jindal or equivalent as approved by AO

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

(a) S&F false ceiling of 12.5mm th gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by AO and including supply and fixing of items all as specified as below :- Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed. Make : Gyproc

(b) S&F Suspended Plain Ceiling includes Perimeter Channel {Material-GI(IS513),YS-260Mpa, Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. Make : Gypserra™

(c) S&F Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. Make : Gypserra™

(d) S&F Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} Make : Gypserra™

(e) S&F Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Make : Gypserra™

(f) S&F Single layer of 12.5mm tapered edge Plain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Make : Gypboard®

(g) Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape. Make : Gyproc®

M&L for fixing Iron Rawl Type Anchor Fastener 12mm dia and 125mm long incl washer etc for fixing MS frame work to brick/RCC/concrete structures complete all as specified.

S&F Multiwall Polycarbonate Sheets of 6mm thickness of any colour as approved as in roofs complete fixed in position including all accessories as per manufacturer's instructions including overlaps etc. all as specified. Note : Overlaps shall not be measured and paid seprately. Make : Lexan/Plazit Polygal

M&L for ACP sheet of 4mm thickness of approved plain colour/shade for chajjas/sun-shades/cladding and the like works etc. fixed to frame work of MS/aluminium/hollow sections of any size description including finishing all the joints with silicon or as per manufacturer's instructions complete in all respect and complete fixed in position incl scaffolding/ladders etc as required and also making the joint between wall and chajjas/sun-shade water proof all as specified. Note : Frame Work shall be measured and paid separately. Make : Alstrong (ACP Sheet)

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed in repairs complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed as in repairs complete all as specified.

S&F stainless steel curtain rod 25mm bore min thickness 1mm incl stainless steel brackets/supports/end stops etc complete fixed in position complete all as specified.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified.

S&F 18 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 18 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with SS screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 12 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply fixed with SS screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 6 mm thick with min density 600Kg/cum LEAD FREE PVC Celuka ply fixed with SS screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F 5 mm thick with min density 600Kg/cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood or M/s Kumar Arch (P) Ltd or equivalent as approved by AO

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified. Make : KAFF/Hettich

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, Make KAFF/Hettich

S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified. Make : Harrison (Cat No 0812) or equivalent as approved by AO

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent as approved by AO

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified. Make : Hettitch or equivalent as approved.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position all as specified. Make : Hettitch/Godrej/Kaff/Harrison

S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified. Make : Hettitch/Godrej/Kaff/Harrison

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified. Make : Hettitch or equivalent as approved.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

Resecuring or Easing of door shutters for easy closing/opening, end tightening of butt hinges in position, adjustement of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each complete all as specified. Note: The parts replaced shall be measured separately as 'Supply only'.

Supply only Stainless steel butt hinges of size 100mm (heavy weight), with stainless steel screws of approved quality & make complete all as specified and directed.

Supply only Stainless steel tower bolt 200mm long heavy duty of approved quality & make and fixed with stainless steel screws complete all as directed and specified.

Supply only Bright /matt finished Stainless Steel handles of size 150mm oval type, heavy weight of approved quality & make with necessary screws etc all complete all as directed and specified.

Supply only Stainless steel sliding bolt with stainless steel nuts and screws etc. for door shutters of size 250mm plate type, bolt not less than 12mm dia, with and including a minimum of 6 bolts and nuts, four on bolt plate, heavy weight ISI marked of approved quality & make complete fixed as in repair all as specified and directed.

DELTA CONSTRUCTION CO

M/S Mukesh Kumar Gupta

AR CONSTRUCTIONS

m/s panchmukhi builders