Construction of Semi UG FSC

Sch 'A' Part-I Bldg Work

M & L for Hard Core of gauge n exc 63 mm ,deposeted,spread and levelled in layers n exc 15 cm thick,watered and rammed to a true surface Complete all as specified and as directed.

M & L Cement Concrete in fdn type D-2 1:4:8 40 mm graded aggregate) Complete all as specified and as directed.

M&L 100mm thick Cement concrete type D-2 1:4:8 40 mm graded aggregate) in sub base of flooring Complete all as specified and as directed.

M & L 75mm Cement concrete type B-2 1:2:4 (20 mm graded aggregate) complete completed as specified and as directed.

M&L providing cement concrete type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings,kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L for RCC M-25 Re-inford cement concete (design mix) in:- Foundation, including rafts, footing, foundation beams, bases for column, etc., basement slabs under reamed piles and mass concerete all as specified and directed. Note:- (Design Mix submitted by vendor before starting the work).

M & L for RCC M-25 in Beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles complete all as specified and as directed. Note:- (Approved Design Mix from Govt Approved Lab to be submitted by vendor before starting the wk)

M & L for RCC M-25 in Columns, pillars, piers, posts and struts and the like all as specified and directed. Note:- (Approved Design Mix from Govt Approved Lb to be submitted by vendor before starting the work)

M & L for RCC M-25 in walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses all as specified and directed. Note:- (Approved Design Mix from Govt Approved Lab to be submitted by vendor before starting the works)

M & L for RCC M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, Balconies, canopies, deck slabs and in shelves and the like all as specified and directed. Note:- (Approved Design Mix from Govt Approved Lab to be submitted by vendor before starting the work.

M & L for mild steel TMT Bar 10 mmn dia and overm cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed

M & L for Mild steel TMT Bar 6 to 8 mmn dia and overm cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips

M & L formwork to sides of rough finished flat surface of concrete foundations, footings, bases of colums, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and as directed.

M & L Formwork to rough finished flat surface soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and as directed.

M & L Formwork to rough finished flat surface in sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floor and beams, etc. all as specified ans as directed.

M & L Formwork to rough finished square, rectangular surfaces of concrete in sides of Walls, pillars, posts, struts, piers, columns and stanchions all as specified and as directed.

M&L Liquid water proofing compund

M & L for verified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. aet and joined in neat cement slurry and pointed in white or coloured cement to nmatch complete all as specified and as directed.

Non- skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Glazed Ceramic coloured tile 450x350x 7mm thick complete all as specified and as directed.

M & L for screed bed or bedding laver of mortar 15 mm thick for laying floor finished complete all as specified and as directed.

M & L Rendering 15 mm thick on wall in CM 1:4 on fair faces of bricks work or concrete surfaces complete all as specified and as directed.

M & L Rendering 10 mm thick on ceiling CM 1:4 on fair faces of bricks work or concrete surfaces complete all as specified and as directed.

M & L Rendering 10 mm thick on roof in CM 1:4 on fair faces of bricks work or concrete surfaces complete all as specified and as directed.

M & L Preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of wall surfaces including priming coat and wall care putty and applying two coats of distemper oil emulsion.

M & L for preparing new plastered surfaces of wall and applying two coats of Cement Based Paint complete all as specified and as directed.

S & F anodised Aluminium door frame of section weight not less then 1.5Kg /RM and aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. door Size 1500mm x 2100 Double shutter including all fittings complete all as specified and as directed.

S & F anodised Aluminium door frame of section weight not less then 1.5Kg /RM and aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. door Size 1200mm x 2100 Double shutter including all fittings complete all as specified and as directed.

S & F anodised Aluminium door frame of section weight not less then 1.5Kg /RM and aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. door Size 1000mm x 2100 Double shutter including all fittings complete all as specified and as directed.

S & F anodised Aluminium window frame of section weight not less then 1.5Kg /RM and aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. door Size 1200mm x 1000 including all fittings complete all as specified and as directed.

S & F anodised Aluminium Ventilator frame of section weight not less then 1.5Kg /RM and aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. door Size 600mm x 450 including all fittings complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per Drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame 30 mm thick (style) consisting of frame rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Butt hinges, 75mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm

S&F Aluminium handle cast type anodised 150 mm size

S & F 16mm 3-layer PP-R P o l y p r o p y l e n e random copolymer)random copolymer)concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water including fitting complete

S & F 25mm 3-layer PP-R P o l y p r o p y l e n e random copolymer)random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water in floor and ceiling including fitting complete

PP-R Gate valves 25mm (brass insert) as per requirement.

S&F Vitreous China urinals, full stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern complete all as specified and directed.

S & F PVC valveless, syphonic action type, low level, dual flush cistern, of capacity 10lit ,white, with inlet ball valve, float and handle including brackets & flush pipe of polyethylene complete all as specified and directed.

S&F 20mm dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/CPVC pipe/fittings and fixed complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) including two tank nipples one at inlet and other at one outlet of 20mm dia complete all as specified and directed.

M&L for 110 mm Bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm PVC (SWR) WC connector bent type complete all as specified and directed.

PVC(SWR) junction single (single 'T') equal or unequal 110mm bore complete all as specified and directed.

S & F PVC (SWR) 110 mm dia vent cowl complete all as specified and directed.

S&F PVC (SWR) 75mm dia bent type complete all as specified and directed.

S & F PVC (SWR) 75 mm dia vent cowl complete all as specified and directed.

S & F PVC (SWR) branch piece with access door, single (Single Tee) equal or unequal 75mm bore pipe complete in all respect as specified and directed.

S & F wash hand basins, vitreous china of size 550 x400mm(flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron/CPVC pipe/fittings complete all as specified and directed.

S & F PTMT ball valve high pressure 20mm bore with epoxy coated aluminium rod & high density plastic ball screwed for iron/CPVC pipe/fittings complete all as specified and directed.

S & F PVC Connections 15 mm size with PTMP nuts of length 600mm

S&F 15mm bore dia CP finish , bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange complete all as specified and directed.

S & F 15mm bore dia CP finish,angle valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange complete all as specified and directed.

S & F vitreous china wash down water closet Pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete all as specified and directed.

M & L for AAC Blockes of size 600 x 200 x 150 mm ( Make Brikolite/NCL/Nucon) built in CM 1:4 complete all as specified and as directed.

M & L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application completed all as specified.

M & L Priming surfaces and applying bitumen as a primer in base of APP membrance completed all as specified and as directed

Supply only quick setting compund

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering

Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering

Roof truss ( Framed), Trussed, purlins, crane gantries, rail and fasting and heavy bracket framing (Beam, tee, angle, channel)

M & L preparation of new steel surfaces, and applying two coat of synthetic enamel paint over a coat of red oxide primer.

Sch 'A' Part II (Retaining wall) (RRM) M & L Cement Concrete in fdn type D-2 1:4:8 (40 mm graded aggregate) complete all as specified and as directed.

M & L Cement Concrete in type C-2 1:3:6 (40 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

M & L Cement Concrete type B-1 1:2:4 (20 mm graded aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M & L Walling of random rubble stone masonry,uncoursed, well bonded,bedded and solidaly hearted,built in CM 1:6 complete all as specified and as directed.

M & L Rendering 15 mm thick on wall in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.

M&L for priming surfaces and applying bitumen as a primer in base of APP membrane complete all as specified and as directed.

M&L Liquid Water Proofing Compound Conform to IS 2645-2003. Make : Pidilite/ Dr Fixit/Fevicol complete all as specified and as directed.

Sch 'A' Part III (Drain) (RRM) M & L Cement Concrete in fdn type D-2 1:4:8 (40 mm graded aggregate) complete all as specified and as directed.

M & L Cement Concrete type B-1 1:2:4 (20 mm graded aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M & L Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidaly hearted,built in CM 1:6 complete all as specified and as directed.

M & L Rendering 15 mm thick on wall in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L Liquid Water Proofing Compound Conform to IS 2645-2003. Make : Pidilite/ Dr Fixit /Fevicol complete all as specified and as directed.

Sch 'A' Part IV (E&M Work) S & F sheet metal enclosure for Distribution box 4 way double door TPN 440 volts copper bus bar and neutral link earting stud conform to IS 13032 & IS 8623 double door complete all as directed. Make: Legrand / L&T/ Siemens.

S & F RCCBs four pole 300mA 415 Volts 63 Amps complete all as directed. Make Legrand / L& T/ Siemens.

S & F sheet metal enclosure for Distribution box 8 way double door SPN 230 volts copper bus bar and neutral link earting stud conform to IS 13032 & IS 8623 double door complete all as directed. Make: Legrand / L&T/ Siemens.

S & F MCB SPN 240 Volts 20 Amps complete with PVC enclosure complete all as directed. Make: Legrand/ L & T/ Siemens.

S & F MCB SP 240 Volts 6 to 32 Amps complete all as directed. Make : Legrand/ L & T/ Siemens.

S & F Sheetmetal enclosure with three pin and earth socket, plug top with and including MCB TPN 32 Amps 415 Volts complete all as directed. Make : Legrand/ L & T/ Siemens.

S & F MCB TPN 415 Volts 20 Amps with and including PVC enclosure complete all as directed. Make : Legrand/ L & T/ Siemens.

M & L for point wiring with 1.5 sqmm (nominal cross suctional area) PVC insulated un sheathed single core coper cable working voltage 1100 Voly grade confirming to IS-694 with including rigid non metalic 20 mm PVC conduilt including MS box of suitable size made out of sheat metal not less than 1.6 mm thick, brass machine screw, washer, 6mm thick hylem sheet including 1.5 sqmm size (nominal cross suctional area) PVC insulated unsheathed single core coper cable as earth continuty conductor connected to main switches/ DBs or common earth dolly completed all as specified and directed. Note: The Rates for chasses cutting shall be deemed to be include in the unit Rate.

All as per item No 8 above mentioned here-in before but for one 3/5 pin socket outlet point, 5/6 Amps on the independent board completed all as specified and directed.

All as per item No 8 above mentioned here-in before but for point wiring with 4 sqmm (nominal cross suctional area) PVC insulated un sheathed single core coper cable working voltage 1100 Volts grade confirming to IS-694 for one 5 pin socket outlet point, 15/16 Amps on the independent board completed all as specified and directed.

S & F Switch Piano type 5A 230V flush type one way ( Snow White) completed all as specified and directed. (Make-Anchor/SSk/Cona).

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size completed all as specified and directed.

S & F Switches socket combination (Snow white) multipurpoose 2 in 1, 15A 230V completed all as specified and directed. (Make- Anchor/SSk/Cona).

S & F Switch socket combination (Snow White) multipurpose 5A 230V ( Make-Anchor/SSk/Cona).

S & L cable XPLE insulated screened PVC bedded galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core, laid in trenches, fixing on wall complete all as specified and directed.

S & L cable XPLE insulated screened PVC bedded galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core, laid in trenches, fixing on wall complete all as specified and directed.

S & F Ceiling rose three terminal (Snow white) complete all as specified and directed. Make-Anchor/ SSK/Cona.

S & F round shape surface mounted LED light fittings 12 watt with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F Plastic body fresh air fan with louvers shutter of 250 mm sweep with and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Crompton Greaves/Havells/Bajaj/ Khaitan.

S & F Testing and commissioning three phase 1.2 HP Monoblock pump 430 Volt complete with and incl 3 Mtr length required size flexible suction pipe, foot valve and connected accessories complete all as specified and directed.

S & L Tubes medium grade galvanished pipe of size 32mm bore with all fitting; laid in trenches, fixing on wall complete all as directed.

M & L for sub main wiring with 2x6.0 sq mm (nominal cross sectional area) PVC insulated un shealthed single core coper cable working voltage 1100 Volt grade confirming to IS-694 with including rigid non metalic 25mm PVC conduilt, chasses cutting and including 1 x 6 sqmm mm (nominal cross sectional area) PVC insulated un sheathed single core copper cable as earth continuity conductor connected to main switches/ DBs or common earth dolly completed all as specified and directed. Note: Chasses cutting shall be deemed to be include in the unit rate.

M & L for sub main wiring with 4x10.0 sq mm (nominal cross sectional area) PVC insulated un shealthed single core coper cable working voltage 1100 Volt grade confirming to IS-694 with including rigid non metalic 25mm PVC conduilt, chasses cutting and including 2 x 6 sqmm mm (nominal cross sectional area) PVC insulated un sheathed single core copper cable as earth continuity conductor connected to main switches/ DBs or common earth dolly completed all as specified and directed. Note: Chasses cutting shall be deemed to be include in the unit rate

Supply, Installing, testing and commissioning of Heavy duty industrial grade Dehumidifer 0.2 Ton (15 LPD) single phase 230 Volt with all connected accessories with following specifications:- Type: vertical, Frame: GI section profile, Panel: Heavy Guage single skin/SS, Compressor: Auto shutoff, Colour: Bi-colour powder coated/mat, Ambient temperature: 5-50 degree Cente grade, Back suction front throw for larger area coverage one touch humidity setting and display, Temparature disply, inbuilt auto Defrost, inbuilt compressor protection, inbuilt Fuse and MCB prote, the unit is fully mobile, works independently without attendant, Compressor: Low power emerson complete all as directed. Make DUEX Industries system of series DEW-POINT or of equivalent. Note: (i) Contractor shall be take approval of the acceptance officer before procurement.

M & L for Earthing complete with GI earth electrode 60cmX60cmX6mm mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth wide 4 mm as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified and as directed. Note: 1. The rates for light grade 15 dia GI pipe for main earthing lead, charcoal, salt, excavation and earth work, pit cover, PCC work shall be deemed to be included in the unit Rate

M&L for MCCB TPN 100 Amp 25 KVA, 430 Volt with and including sheet shed encl 1.6mm thick complete all as directed.

Sch 'A' Part V (Sewage Disposal) M&L Excavating over area, n.exc 1.5M deep for foundation etc and getting out in soft loose soil. All as specified and as directed.

M&L Excavating over area, n.exc 1.5 m and n exc 3.00 Mt in depth, for foundation etc and getting out in soft loose soil. All as specified and as directed

Excavating over area, exc 3.0 m and n exc 4.50 Mt in depth, for foundation and getting out in soft loose soil. All as specified and as directed

M&L Cement concrete in fdn type D-2 1:4:8 40mm graded aggregate, Complete all as specified and as directed

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan nexc 6 m mean radius laid dry completed as specified and as directed.

M & L for loose filling with Broken bricks filinge guage 80 to 150 mm in soakage pits, soakage wells. All as specified and as directed.

M&L MS TMT bars 6-8 mm dia overm cut to length, bent to shape required, including cranking, bending spirally for hopping for columns hooking ends binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips completed as specified and as directed.

M&L for mild steel TMT bars 5 mm dia and over upto 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hopping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and as directed.

M&L for mild steel TMT bars 10 mmn dia and overm cut to length, bent to shape required, including cranking, bending spirally for hopping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and as directed.

M & L for RCC M-25 in walls, retaining walls, basement walls, ballast walls and the like any thickness, above top of footings, including attached plasters and buttresses all as specified and directed.

M&L for 75mm thick concrete 1:3:6 type C2 for plunth protection finished even and smooth with using extra cement every 3 mtr intervals and turning all as specified and as directed.

M&L for hardcore for guage exc 63mm but n.exc 100 mm and deposited and spread in layers n.exc 15cm thick in broken stones watered and rammed to true surface all as specified and as directed.

Removing excavated material as in soils to a distance nexc 50 m and depositing at a level n. exc 1.5 m above the starting point all as specified and as directed.

S & F Cast Iron Manhole Covers exc 5 kg weight each on soakage well grade FG 150 all as specified and as directed.

M&L Excavating over area, n.exc 1.5M deep for foundation etc and getting out in soft loose soil. All as specified and as directed.

M&L Excavating over area, n.exc 1.5 m and n exc 3.00 in depth, for foundation and getting out in soft loose soil. All as specified and as directed

M&L Cement concrete in fdn type D-2 1:4:8 (40 mm graded aggragate). All as specified and as directed

M&L Cement concrete in fdn type C-2 1:3:6 as in bed to drain pipe incl packing under and haunching against sites of pipe for 100mm dia pipe. Complete all as specified and as directed

M & L for providingc PCC 1:2:4 type B-2 using 40mm graded stone aggregate cement concrete as in fnd filling & mass concrete completed all as specified and as directed

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 All as specified and as directed.

M&L form work to faces of walls, retaining walls, abutment parapets and staircase and similar work etc upto rough finished surface of concrete flats as specified and as directed.

M & L for Mild steel TMT Bar 6 to 8 mmn dia and overm cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips completed as specified and as directed.

M & L for precast cement concrete slab 1:2:4 using 20 mm graded aggregate set in mortar 1:4 completed as specified and as directed.

M & L for mild steel TMT Bar 10 mmn dia and overm cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed

M & L for rendering 15 mm thick in cement mortar 1:3 with water proofing compound on fair surface of brick work on concrete surface all as specified and as directed

Supply only integral water proofing compound all as specified and as directed

M & L for 100 mm bore cast iron soil spun pipes, waste and vent pipes in any length with without ears, with cement joints laid in trenchs or in floor with clamps all as specified and as directed

M & L for 100 mm bore cast iron soil spun pipes, waste and vent pipes in any length with without ears, with cement joints fixed to walls with clamps all as specified and as directed

M & L for Stack clamps of 50 mm by 5 mm flat iron and 16 mm dia round stays incl bolts, nuts and securing ends of stays to wall or roof for 100 mm bore pipe all as specified and as directed

M & L for returning, filing in trenchs including spreading, leveling watering and well raming in layers n exc 25 cm in soft/ disintegrated rock all as specified and as directed

Removing excavated material as in soils to a distance exc 50 m and depositing at a level n.exc 1.5 m above the starting point as specified and as directed

M&L for providing, PCC 1:3:6 type C2 using 40 mm graded store aggregate as in boundary pilars posts etc as specified and as directed

M & L for 75 mm bore cast iron soil spun pipes, waste and vent pipes in any length with without ears, with cement joints fixed to walls with clamps all as specified and as directed

M&L cast iron vent cowl for 75 mm bore of pipe all as specified and as directed

Sch 'A' Part VI (Fire Alarm System) S & F Individual standalone plastic body smoke alarm with adequate provision for fixing on wall /ceiling /roof. The unit to have sensor capable of covering area > 40 sqm and actuating an inbuilt alarm with loudness minimum 80 DB. Smoke alarm be powered by 9 volt lithium batteries with an arrangement to test the battery, indicator to warn for low battery, including supply two Nos of battery (ISI marked) complete all as directed.

S & F Individual standalone plastic body heat alarm with adequate provision for fixing on wall /ceiling /roof. The unit to have sensor capable of detecting fixed temprature of 58oC and actuating an inbuilt alarm powered by 9 volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two Nos of battery (ISI marked) complete all as directed.

S & F Fire ball extinguisher of 1.3 kg wt with suitable provision for wall mounting and capable of self activating on contact with flames. The unit to be maintenance free, non toxic, envioronment friendlye, and suitable for all types of fires (ISI marked) complete all as directed.

Sch 'A' Part VII (Lightning Conductor) S&F Conventional Air Terminal having a primary air terminal 12mm dia, 1200mm long Tinned copper rod with blunt tip, secondary air terrminal contains four Spikes of 12x3mm Tinned copper strip of 120mm long mounted over a squircle of 70 x 70mm with polyamide base plate complete with and including fixing on PCC block complete all as specified and as directed. Make: CIKIT of Model : A'SCAT2.0 or of equivalent in Elapp Technology/Sabo systems Pvt Ltd. Note: (i) The Contractor shall take approval of the acceptance officer before procurement.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hex head screw complete all as directed.

S&F Copper strip of size 20 x 3.15 mm complete with saddles and fixing screws for roof conductor and down conductor above ground all as specified and directed.

S&F Galvanized Iron strip 32 x 6 mm complete with saddles and fixing screws above ground complete all as specified and as directed.

S & L Tubes medium grade galvanished pipe of size 40mm bore with all fitting; laid in trenches, fixing on wall complete all as directed.

M & L for Earthing complete with GI earth electrode 60cmX60cmX60cm mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth strip 32 x 6 mm as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified and as directed. Note: 1. The rates for light grade 40 dia GI pipe for protection of main earthing lead, charcoal, salt, excavation and earth work, PCC pit and CI cover works shall be deemed to be included in the unit Rate.

RL PAREEK AND SONS