Civil Work for Construction of Lift Shaft for Shantiniwas Building in Shri Saibaba Temple Premises at Shirdi.(2nd Call)

Amount

DISMENTLING WORK

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete in cluding stacking the materials as directed with all leads, lifts etc. complete

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. Lift up to 2.0m.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Slab Cutting work including stacking the spoils as directed with all leads, lifts etc, complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test etc. complete.

Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing / Toilet Waterproofing on R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

Shifting of Excavated material 2 Km away from construction work

PLAIN CEMENT CONCRETE

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

REINFORCEMENT CEMENT CONCRETE

Providing and laying in situ / Ready Mix cemen tconcrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, strip foundations, grill age and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying / pumping cover blocks, compaction and curing roughening the surface if special finishis to be provided (Excluding reinforcement and structural steel ) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast insitu / Ready Mix cement concrete in M-20 of trap / granite / quartzite / gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying / pumping, compacting, curing, finishing and roughening them if special finishis to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Ground Floor

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Ground Floor

BRICK WORK / BLOCK WORK

Providing first class Brick masonry with conventional / IS. Type bricks in cement mortar 1:4 including scaffolding, racking out joints pointing in C.M 1:3 and watering etc. in pillars of curved shapes, as shown on the drawing or as directed etc. complete. Ground Floor

WATER PROOFING

Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing / Toilet Waterproofing on R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

PLASTERING AND POINTING

Providing in ternal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

PAVING, FLOORING AND DADO

Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade. Raj Nagar Plain white marble/ Udaipur green marble/ Jaiselmer Yellow marble.

COLOUR, WHITE WASHING, DISTEMPERING

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

MISCELLANEOUS

Supplying, Drilling /Cleaning hole and injecting Hilti make ETA Approved RE 500 V3 chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2 / TR023 or relevant tested and accepted rebar guidelines. The chemicals hould have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jeto fcleanair, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA 22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per them anufacturer’srecommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning be fore drilling to be done to avoid hitting existing rebars. Re 500 -16 mm dia 320mm depth

Supplying, Drilling /Cleaning hole and injecting Hilti make ETA Approved RE 500 V3 chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2 / TR023 or relevant tested and accepted rebar guidelines. The chemicals hould have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jeto fcleanair, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDEA 22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per them anufacturer’srecommendations.The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning be fore drilling to be done to avoid hitting existing rebars. Re 500 -16 mm dia 320mm depth