NIT No GE/ND-13/2025-26

Amount

Taking up or down 15 mm dia steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

S&F 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

M&L for Cutting chases, pinning in making good to facings brick wall where required and pointing, exc 10 cm but not exc 20 cm girth complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent, teflon tape and all fitting complete all as specified and directed.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified and directed.

S&F in repair 20 mm dia Brass Elbow complete all as specified and directed.

S&F in repair 20 mm dia Brass Elbow (3/4 x 1/2) complete all as specified and directed.

S&F in repair Union 20 mm complete all as specified and directed.

S&F in repair 20 mm dia Brass Tee complete all as specified and directed.

S&F in repair CPVC BALL VALVE of outer dia 20 mm complete all as specified and directed.

S&F in repair CPVC Tank Adaptor of outer dia 20 mm complete all as specified and directed.

Supply only plain CPVC fittings such as socket, elbow, nipple, Tee, union, Reducer, Bushing, Step over bends,Y, End cap, End plugs, Male Brass Threaded Adaptor, Female Brass Threaded Adaptor etc for 20 mm bore outer dia of CPVC pipe (ISI marked) complete all as specified and directed.

Supply only plain CPVC fittings such as socket, elbow, nipple, Tee, union, Reducer, Bushing, Step over bends, Y, End cap, End plugs etc for 25 mm bore outer dia of CPVC pipe (ISI marked) complete all as specified and directed.

Dismantling water tanks exc 250 and not exc 500 ltr cap and removing away from site complete all as specified and directed.

Dismantling water tanks exc 500 and not exc 1000 ltr cap and removing away from site complete all as specified and directed.

S&F Rotational moulded polythylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position, 500 litres capacity complete all as specified and directed.

S&F Rotational moulded polythylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position, 1000 litres capacity complete all as specified and directed.

S&F in repair 20 mm bore pvc ball cock / float valve of water tank high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair gun metal gate valve 20 mm bore with iron wheel screwed both ends for iron pipes complete all as specified and directed.

S&F in repair PVC cover/ lid for PVC over head water tank suitable for capacity of 500 ltrs and upto 1000 ltrs capacity complete all as specified and directed.

Cleaning of water storage tank completely by removing all scale, dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint, tank of capacity ranging exc 250 ltrs upto and including 500 ltrs including dismantling and refixing if required complete all as specified and directed.

All as per Srl item No 23.00 above but for 1000 litre capacity tank complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints and clamps fixed to wall complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repairs corner glass shelf of size 300x300 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated knobs on botn sides fixed in position complete all as specified and directed.

S&F in repairs for Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type pillar tap swan neck for WHBs with capstan heads/ lever type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make: Cera Cat Part No F2006101 or equivalent of make as specified in PS.

S&F in repair 15mm bore brass CP wall mixer (2 -in -1 type) with L bend (provision for over head shower) fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed.

S&F in repair 15mm bore brass CP single lever basin mixer fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed. Make: Cera Cat Part No. F2002461 or equivalent of make as specified in PS.

S&F in repair Kitchen Sink Mixer Swivel spout 450 mm long braided hose (wall Mounted) 15mm bore dia chromium plated Brass round spout with popup Waste assembly with 10mm dia, 450 mm long copper pipes and connecting extra pipe as required complete all as specified and directed. Make: Cera Cat Part No. F1015501 or equivalent of make as specified in PS.

S&F in repairs PVC connection 15 mm bore 450 mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

S&F in repairs PVC connection 15 mm bore 600 mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

S&F in repairs 32 mm bore PVC waste pipe for WHB complete all as specified and directed.

S&F in repairs waste coupling brass chromium plated of 32 mm dia for wash hand basin complete all as specified and directed.

S&F in repairs CP grating 75mm/100 mm dia round with hole or without hole fixed on floor/Nahani trap fixed with white cement including necessary cutting etc complete all as specified and directed.

S&F in repairs chromium plated cast copper alloy angle valve fancy type with capastan head screwed down ends for high pressure for 15 mm bore iron pipe complete all as specified and directed.

S&F in repairs chromium plated cast copper alloy 2 way 2 handle angle valve fancy type with capastan head screwed down ends for high pressure for 15 mm bore iron pipe complete all as specified and directed.

S&F in repairs, Vitreous China wash down water closet pan and trap EWC (pedestal pattern), white with plastic seat cover including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, fixing bolt etc and making good damaged portion complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc and making good disturbed portion to match existing surfaces (excluding flushing cistern) complete all as specified and directed.

S&F in repair for EWC jet spray fixed under EWC seat cover complete all as specified and directed.

S&F in repairs chromium plated health faucet (Brass) with Lock including wall Hooks & flexible pipe 15mm bore hose connecting pipe 1.2 m long with check nut and washers complete all as specified and directed. Make: Hindware Cat Part No F-160122 or equivalent of make as specified in PS.

S&F in repair Bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90 gms) complete all as specified and directed.

S&F in repair 15 mm cistern Ball cock high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms complete all as specified and directed.

S&F in repairs Wash Hand Basin of size 550mmX425mm counter top(oval) white including 32mm bore dia CP waste coupling, waste pipe incl required mason work to proper fixing in opening complete all as specified and directed.

S&F in repairs vitreous china white wash hand basin flat back of size 550x400mm ISI marked Ist quality including CI/MS brackets including cutting for and pinning in brackets complete all as specified and directed.

S&F in repairs 600 mm long C P finish CP Towel Bar/rod plain or D type complete in all respect complete all as specified and directed.

S&F in repair 15mm bore dia Stainless Steel finish CP 2 way Bib Cock quarter turn including cover plate complete all as specified and directed.

S&F in repairs 15 mm dia cast copper alloy stop valve screwed down for high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 150mm PTMT Symet Bath assest Grating square hole/ without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry complete all as specified and directed.

S&F in repairs Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) colour as decided by engr in charge complete all as specified and directed.

S&F in repair brass chromium plated Urinal spreader heavy duty of PTMT any colour for fixing with 15mm dia pipe.(Minimum weight 60gms) suitable for half stall urinal fixed with stainless steel screw complete all as specified and directed.

S&F in repairs chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed. Make: Jaquar Cat Part No CON-CHR-049NKN/ Cera Cat Part No F-2002153 or equivelant of make as specified in PS.

S&F in repair CP finish Robe Hook complete in all respectcomplete all as specified and directed. Make: Hindware CAT Part No F890001 or equivalent in Jaquar / Kohler

S&F in repairs chromium plated finish paper holder complete in all respect complete all as specified and directed.

S&F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed.

S&F in repair peg set of 6 fixed with rawal plug complete all as specified and directed. Make: Prayag Cat Part No BEA-30 or equivalent in Shakti/ Hindware/ PRAYAG

S&F in repairs CP double Soap Holder (Brass) with tumber holder complete all as specified and directed.

S&F in repair brass chromium plated overhead square shower rose 200 mm with arm upto 300 mm length with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and directed.

S&F in repair sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting, overall size 610mmx460mm bowl size 525mmx375mmx250mm complete all as specified and directed.

S&F in repair Stainless steel single Soap Dish/stand complete all as specified and directed.

S&F in repair glass made wall mounted (removable bottle) liquid Soap Dispenser complete all as specified and directed.

S&F in repair Stain less steel plate rack made of stainless steel 1mm thick 900mmx 600mmx250mm complete all as specified and directed.

S&F in repair CP Towel ring Square of Colour : Blush Gold PVD complete in all respect complete all as specified and directed. Make: Jaquar Cat Part No AKP-BGP-35721P or equivalent of make as specified in PS.

Supply only brass jumper washer, PVC gitti, screw, dhaga ,solvent,teflon tape,M seal,white cement packet,fasteners 150mm long, brass head, capstan head, clamp for corner glass shelf, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and directed.

S&F in repair CI bracket of exiting size, for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified and directed.

M&L for manual Sealing of traps,WCs (manually) with neat cement paste after removal of water from it, to prevent or make up the leakage including cementing in cement mortar (1:3) from inside and outside both & refixing grating, plasters etc complete all as specified and directed.

S&F in repairs PVC (SWR) 75 mm dia floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair, CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate and making good complete all as specified and directed.

M&L for Cutting chases, pinning in stone concrete block or slab walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring or any purpose required at site etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee,plug, etc for 15 mm bore pipe (ISI marked)complete all as specified and directed. Note: Refixing of old GI tubing upto 2.5 m included in rates

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union,tank connection etc for 20 mm bore pipe (ISI marked) complete all as specified and directed. Note: Refixing of old GI tubing upto 1.5 m included in rates

S&F in repairs Bathroom vanity box set fixed with openable door and having shelves inside having top basin and having cp basin mixer attached to it of elegant design incl all fitting and fixtures of approved ISI make complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gutties embedded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs PVC handle for low level flushing cistern complete all as specified and directed.

S&F in repairs PVC syphon (Make : Prayag / Jaquar / hindware) complete for low level flushing cistern complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) not exe 1.50 Sqm in each complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 and not exc. 4.00 Sqm in each complete all as specified and directed

Taking down shutters of any descrption exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed.

S&F 35 mm thick 2nd class H wood Plain framed, panelled shutter (two panel) withlock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,supplied and fitted to chowkats complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ Ceosetory windows and other frames/chowkat of size 100mmx50 mm comprising of virgin PVC polymer of K value 50-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame dencity of 750kg/cum, screw withdrawl strength of 200N (Face and 1100N edge), minimum compressive strength of 58N/Sqmm and resistance to flame of class A category and property of being termite/borer proof, water/moiture proof and fire retardant and fixed with MS hold fasts/lugs/SS Dash fastener of required dia and length of complete as per direction of Engr in charge complete all as specified and directed. Note : For WPC solid door /windows frames, minus 5mm tolerance in dimension ie depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge complete all as specified and directed. Note: stainless steel butt hinges shall be paid separately

M&L for Fe-410-W(Gde-E-250)quality-B for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F in repairs Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

S&F in repair Mild steel Helical door springs including roller plate complete of 150mm long complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium handles, cast type, anodised complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1.0 Sqm and n exc 2.0 Sqm complete all as specified and directed.

M&L for Preparing of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer including preparation of old painted surfaces of concrete/plaster surfaces complete all as specified and directed.

S&F in repair for aluminium door seal upto 1000 mm long on bottom of door complete all as specified and directed.

S&F in repair door closer of aluminium esxtruded section body hydraulically regulated automatic type, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F in repair mortice lock/jig for aluminium door vertical type size 100mm & upto 4 lever including escutcheon plate and two no of keys complete all as specified and directed.

S&F in Repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors/windows with necessary nails ,snap beading, fillets and stainless steel wire staples as required complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick fiber sheet glass ordinary quality and glazing with wooden beads, PVC beading, aluminium beads with oil/glass putty in square n exc 0.5 Sqm in each pane upto G+3 height complete all as specified and directed.

S&F 4 mm thick fiber sheet figured/ opaque/ tinted glass ordinary quality and glazing with wooden beads, PVC beading, aluminium beads with oil/glass putty in square n exc 0.5 Sqm in each pane upto G+3 height complete all as specified and directed.

S&F in repair Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia and of 1mm thicknessof approved quality with incl two number decorative brackets and end cap as required design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as specified and directed.

S&F in repairs for 150mm long aluminium handles, cast type, anodised complete all as specified and directed.

S&F in repairs for 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repair Roll forming GI ECO 4000 series double shutters (glazed shutter and mesh shutters) steel windows and ventilators with guard bars, fabricated from roll formed sections made galvanized steel colour coated/powder coated sections including 4mm thick plain glass pane in glazing for glazed shutter and stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm complete for mesh shutters, including two coats of synthetic enamel paint over coat of red oxide on steel guard bar, all fitting and fixtures complete all as specified and directed.

S&F in repair factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.25m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window upto 1.25 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body it single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F in repair Three Track Sliding powder coated aluminium Window/ventilator of sizes of Top/Side and Bottom track section of 91.80mm x 31.75mm x 1.60mm thick and Shutter section of sizes 39.40 mm x 17.70mm x 1.20mm thick including joining cleats, beading,locking arrangement, rubber gasket for fixing etc complete with 5.5 mm thick tinted glass & stailness steel wire cloth, 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm with suitable handle, tower bolt/locking arrangment and fixed with aluminium wire staples complete including taking down old existing window complete all as specified and directed.

S&F in repair aluminium powder coated decorative grill with 6.3mm thick aluminum section and 100X100mm openings , weighing not less than 1.75Kg/Sqm and anodized aluminium 'U' shape channel frame work alround the grill (if required opening for handle or AC as per dirction of Engr in Charge) including taking down complete all as specified and directed.

S&F in repair Powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size 02 Nos tower bolt 200 mm , sliding bolt 300 mm long 01 No, door handles 200 mm 2 Nos, aluminium butt hinges stainles steel 125 mm 04 Nos, hydraulic door closer heavy duty and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 1.00 mtr in width including taking down old existing door complete all as specified and directed. Make of glass (MODI/FLOAT/ATUL).(if required one space for window AC shall be provided as per dirction of Engr in Charge)

S&F repair powder coated aluminium partition n.exc 1.20 Sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board complete all as specified and directed. (Make: GLASS Make MODI/ FLOAT/ ATUL).

S&F in repairs powder coated aluminium window using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter including ornamental aluminium grill, 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye – 02 Nos 150 mm , butt hinges 100 mm 04 Nos etc including taking down old existing window complete all a specified and directed by Engr-in-Charge.

Easying and adjusting aluminium doors incl replacement of small articles like rubber gaskets , small al framesaluminum beads screws etc incl taking down and refixing in same opening complete all as specified and directed.

S&F in repair decorative febric vension blinds/ louvers with complete fittings and fixtures channel or rails are made from high quality fabrics with strips or louvers, hang from the head rail and linked by chain at the bottom. Vertical blinds have two control. One allows the blind louvers to be tilted to the left or right and block the light out, let it in, or filter it by tilting the louvers to an angle and other one lets louvers fully black by pull either to the left, right or centre all blinds come with head rail with match to all componenet with complete acessary complete all as specified and directed. Note: complete fittings measuerd and paid in Sqm bsed on open area coverd by blinds

S&F in repair 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape drilling holes required for fixing for wood pannel top and bottom portion of the doors where as requirement at site with all fittings, Stainless Steel (Grade 304) plates, locks, scewes, bolts and nuts complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, coking plateform and other similar situations complete all as specified and directed.

M&L for Machine cut kota stone 20-25 mm thick in flooring/ tread, landing laid over 20mm screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the existing slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 15mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the existing slab including rubbing and polishing complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded with 20mm screed bed in cement mortar 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 20 mm thick granite (of any type) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for cement concrete 75 mm thick in PCC 1:4:8 type D2 (40 mm graded aggregate) as in sub base of floors finished fair and even complete all as specified and directed.

M&L for 10-12 mm thick heavy duty parking tiles 400x400 mm of any pattern decided by Engr in charge as in pavings laid over 20 mm thick screed bed 1:4 laid and jointed with cement slurry mixed with pigments to match the shade of tiles complete all as specified and directed. Make: Johnson/Kajaria/Somany/orient

M&L for endura chequerd tiles of approved colour and design 20 to 22mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in paths, floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid joint less glazed virified tiles 8-9 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

All as per item No 131.00 above but in skirting only over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including 10mm thick rendering in CM 1:3 on wall complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface (1200x600mm), 8 to 10 mm thick with matching highlighter over and including 10 mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Design/colour of tiles will be approved by GE) complete all as specified and directed.

M&L for Non skid joint less coloured ceramic tiles 7-8mm thick and tile of size 400x400 mm in floors etc and set and jointed in properly neat cement slurry and pointed in white or coloured cement to match over screed bed of 15mm thickness in cement mortar 1:4 complete all as specified and directed.

S&F in repairs factory made manholes covers with MS flat all round the cover and incl reinforecement with cement conc 1:2:4 type B-I, (20mm graded stone agg ) of any thickness and size laid with cement mortar 1:6 in position complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick in CM 1:4 complete all as specified and directed.

Supply only SBR latex emulsion complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces/other than fair faces of brick work/concrete surfaces of walls (external surfaces upto 4 storey building) in any position in CM 1:4 finishing surface even smooth w/o using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1 :6 finished even and smooth without using extra cement complete all as specified and directed. Note- Rates must be quoted keeping in view scaffolding reqt upto height for 4 storey building

M&L for Rendering 10 mm thick polymer modified plaster on fair faces of brick or concrete surfaces on ceiling in cement mortar 1 :3 finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by the weight of cement complete all as specified and directed. Note: SBR latex shall be measured and paid saperately

S&F GI wire netting 0.9mm dia and 12mm mesh lathing to wood or steel studing joist etc in walls, ceiling stanchions, beams etc incl all laps cutting and waste complete all as specified and directed.

M&L for Preparation of new plastered cerfaces of ceiling and applying two coats of oil bound distemper over a coat of primer and over 1 mm thick wall putty complete all as specified and directed.

M&L for Preparation of new surfaces of walls plastered and applying two coat of oil bound distemper on walls.over a coat of primer over 2 to 3 mm wall putty complete all as specified and directed.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of apex or weather shield paint over a coat of primer over a coat of putty complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separetly Note :- Only steel scaffolding is allowed and rates to be deemed included in quoted rates. The work shall be carried out by enclosing affected area by green cloth) up to G+3 storey building.

M&L for expanded metal, cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire or galvanised wire staples complete to existing reinforcement or steel members. (mesh weight not exceeding 4.00 Kg/Sqm) complete all as specified and directed.

S&F PVC chhaja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fasterner 150mm long with complete set as per sample including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE.

Demolition cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for in ground floors and upto 4 storey complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills , copings and like incl. weathering , slightly rounded or chamfered angles and throating including formwork (straight or curved) complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and upto 4 storey of any description and in any position incl MS pipes Scafolding and making arrangemenets with hessian clothes for protection from falling of concrete & all othersaftey precautions complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.

Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for rough finished surfaces complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 157.00 above but 6 to 8 mm dia complete all as specified and directed.

M&L for complete removal of existing treatment from wall surfaces using vacuum based sanding machine or sandpaper, removal of nails etc & filling cracks/holes by applying wall care putty (JK/Birla) upto 1mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil emulsion distemper over a coat of alkali resistant primer or as approved to bring the surfaces even and smooth by auto roller along with full cleaning of paint/ putty stains (Internally) complete all as specified and directed. Note- All work shall be done mechanically through authorised applicator and cost included in quoted rates.

M&L for applying one coat of oil bound distemper on wall including preparation of old surfaces by vacuum based sanding machine all as specified, removal of nails etc & filling cracks/holes by applying wall care putty(multi purpose mixer shall be used for uniform and proper mixing of putty)to bring the surfaces even and smooth by auto roller along with full cleaning of paint/putty stains (Internally) complete all as specified and directed. Note- All work shall be done mechanically through authorised applicator and cost included in quoted rates.

M&L for complete removal of existing treatment surfaces from plastered or, concrete asbestos cement or stone surfaces of any description and applying two coats of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) over a coat of solvent based primer and a coat of putty along with full cleaning of paint/ putty stains (Externally) complete all as specified and directed. Note- All work shall be done mechanically through authorised applicator and cost included in quoted rates.

M&L for one coat of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) including preparation of exiting painted surface and repairing where required with putty along with full cleaning of paint/putty stains (Externally) complete all as specified and directed. Note- All work shall be done mechanically through authorised applicator and cost included in quoted rates.

M&L for complete removal of existing treatment from ceiling surfaces using vacuum based sanding machine or sandpaper including brooming down or steel wire brushing, scrapping down smoke soot, moulds,moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of wall care putty (JK/Birla) to bring the surfaces even and smooth by auto roller along with full cleaning of paint/putty stains (Internally) complete all as specified and directed. Note- All work shall be done mechanically through authorised applicator and cost included in quoted rates.

M&L for applying one coat of oil bound distemper on ceiling including preparation of old surfaces by vacuum based sanding machine or sandpaper all as specified, filling cracks/holes by applying wall care putty including brooming down or steel wire brushing, scrapping down smoke soot, moulds,moss and efflorescent salts and trading oil and greasy spots by auto roller along with full cleaning of paint/putty stains (Internally) complete all as specified and directed. Note- All work shall be done mechanically through authorised applicator and cost included in quoted rates.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or gith including preparation of old painted wooden surfaces complete all as specified and directed. Note- All work shall be done mechanically through authorised applicator and cost included in quoted rates.

M&L for applying one coat of synthetic enamel paint on steel surfaces of any description over 10 cm width or gith including preparation of old painted steel surfaces complete all as specified and directed. Note- All work shall be done mechanically through authorised applicator and cost included in quoted rates.

M&L for 75mm thick PCC 1:3:6, type C-2 (40 mm agg) as in plinth protection finished even & smooth without using extra cement complete all as specified and directed.

S&F mild Steel work in tubular trusses, purlins, rafters etc including cleats, and steel plates incl wind ties Fe-290 (Gde E 165),including special shaped washer etc. for fixing puff/galvanume sheets complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including dismantling of old steel work complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain or corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F puffed 40 + 2 kg/cum density, 50mm thick panel consisting of 0.50mm TCT (corrugated) Lioydeck profiled coloured sheet on top and 0.5mm TCT plain PPGI sheet at the bottom with 50mm thick Puf sandwiched in between as in roof covering/cladding to wall, fixed with self tapping screws including taking down old existing roof sheets complete all as specified and directed.

Removing building demolished materials / old waste unwanted existing material of any description or any type etc on alternate day to a distance 5 km or beyond out side MOD land (size of lorry should be 200cuft to 300cuft) complete all as specified and directed.

M&L for uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. Note: Work has to be executed up to (G + 3 storey) bldg

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; Framed work rolled section as in framing compound girder staging for water tank,cooler stand as and the like built up from two or more beam or channel section or angles with plates stiffeners etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking down old false ceiling/ wall panelling/ACP sheet of any description including frame work in any condition complete all as specified and directed.

M&L for Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm x 3600 mm, cross tee 25 x 24 x 600mm / 25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm ( thickness of the material of 0.30 mm), using 0.50mm thick ceiling tiles metal perforated type powder coated on both faces, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips complete all as specified and directed by Engr-in-charge.

Providing and fixing PVC SHEET WALL PANELLING of thickness 5mm (±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a groveof 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed.

M&L for PVC 'L' angles fixed at where direction changed portion with suitable adhessive or as per manufacture instruction complete all as specified and directed.

S&F 4mm thick pre coated Aluminium Composite Panel cladding sheet of approved colour and shape, joint filled with silicon sealant, having water resistant properties fixed with all connection to wall as per manufacturers instruction incl dimantling of old acp sheets complete all as specified and directed.

S&F in repair WPC Cup Board made of 18 mm thick (solid PVC sheet) (Plus / minus 0.7) celuka PVC ply complete for hold of shelf / partition and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partition / wall side to be lipped with 18 mm x 1 mm thick PVC sheet of density 600 Kg /cbm manufactured by as ISO -9000 certified company , using solvent cement etc.( including all necessary Aluminium hardware fitting i.e soft closing hinges of make-hettich, godrej, 4 handles, ball catchers including locking arrangement and fixing of steel rod for cloth hanger in each Cup board including dismantling of existing complete in all respect complete all as specified and directed. Note: measurement should be taken external face only i.e. length and breadth)

S&F in repair Kitchen cabinets made out of WPC sheet board 18mm thick including making drawers, partitions, shelves and WPC board on all sides with following specifications and as directed by Engineer-in-charge:- (a) 18mm thick WPC solid flush board with 5mm thick pre-laminated sheet fixed on one side, as kitchen cabinet. (b) Frame of size 50mmx47mm. (c) Shutters having piano hinges and brass handle 75mm long 01 No for each shutter. (d) Bottom back and sides of cabinet covered with 18mm thick WPC board with 5mm thick pre-laminated sheet fixed on one side. (e) Drawers having brass handle 75mm long and two long sliding rails for each drawers with magnatic catcher as required. (f) Cabinet must have one drawers supported of sliding rails and stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) (g) Size of each cabinet shall not be exceeding 0.9 M x 0.75 M and 0.60 M depth. (h) Measurement will be considered only for front face i.e. length & height & depth 0.50m. (j) SS jali racks mounted on drawer chanel Note: Measurement for purpose of payment shall be made on external visible face for width x height (considering frame).

M&L for resolving complaints of plumbing work for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc of any description any size by changing the washers (s)/jumper (s) etc, by adjusting/replacing the washer(s),tightening of taps, tightening of check nuts of PVC connection and making water supply functional in case of blockage, redressing of GI pipe joints if any leakage is found, repair of unfunctional PVC flushing cistern, repair/ replacement of face mohra etc including materials like GI fittings of reqd size M.Seal, safeda, sootar and washers etc. required, complete all as specified and directed by Engineer-in-charge. Any type of complaint related to plumber and other connected items need to be catered for by the contractor. Note :- 1. Contractor may have to deploy more manpower in the particular area including all necessary T&P / equipmen to resolve the complaint within 06 hours of complaint received (on same day). 2. In case contractor fails to get the complaint rectified within 06 hours of complaint received, he shall be penalised for the same at a flat rate of Rs 200/- per complaint , in addn to cost incurred by the department for rectification of complaints from third party. 3. Proper records (date wise) of complaints received & rectified by the contractor shall be maintained and shall be produced for verification Note :- Day to day Complaint received from user's of NSB II Naraina bagh should be resolved within 06 hours of complaint received. 4. The contractor must keep in mind the above said provisions while quoting his rates.

M&L for resolving complaints of joinery/welding work for repair to easing of any type of Doors/Window/CupBoard shutters incl Aluminium ,Steel,Iron and toughened doors by tightening of hinges /handles/ aldropbolt/ towerbolt/ knobs,hasp and staple, mortice lock etc of any size/any number of panels for easy closing/ opening or changing the positionof hinges,adjustments of tower bolts,sliding bolts, door closer incl replacement of looking mirror, floor spring, butt hinges,alu/rubber beadings, curtain rod,fixing fibre glass with glass putty, resecuring of door/window wire gauge, welding work, etc including nails, screws, rawl plug and fevicol, welding rod etc required to make good the work etc complete including replacement of major defective item if required, complete all as specified and directed by Engineer-in-charge. Any type of complaint related to carpenter and other connected items need to be catered for by the contractor. Note :- 1. Contractor may have to deploy more manpower in the particular area including all necessary T&P / equipmen to resolve the complaint within 06 hours of complaint received (on same day). 2. In case contractor fails to get the complaint rectified within 06 hours of complaint received, he shall be penalised for the same at a flat rate of Rs 200/- per complaint, in addn to cost incurred by the department for rectification of complaints from third party. 3. Proper records (date wise) of complaints received & rectified by the contractor shall be maintained and shall be produced for verification. Note :- Day to day Complaint received from user's of NSB II Naraina bagh should be resolved within 06 hours of complaint received. 4. The contractor must keep in mind the above said provisions while quoting his rates.

M&L for cleaning of sweeper work for all blockages of Nahani traps/floor traps/bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm to 300 mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) ,fixing covers to manholes properly,etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time. The contractor shall engage required skilled manpower and provide all necessary tools and plants (manual/pressure cleaning pump and flexible rods and other necessary equipment (as per rules of public health), etc to ensure resolution of complaint in time frame as desired by Engineer-in-Charge. Any type of complaint related to cleaning of sewage line and other connected items need to be catered for by the contractor. Note :- 1. Contractor may have to deploy more manpower in the particular area and deploy adequate sewage cleaning machinery/ equipment to clean the line and open blockages within 06 hours of complaint received (on same day). 2. In case contractor fails to get the complaint rectified within 06 hours of complaint received, he shall be penalised for the same at a flat rate of Rs 200/- per complaint, in addn to cost incurred by the department for rectification of complaints from third party. 3. Proper records (date wise) of complaints received & rectified by the contractor shall be maintained and shall be produced for verification. Note :- Day to day Complaint received from user's of NSB II Naraina bagh should be resolved within 06 hours of complaint received. 4. The contractor must keep in mind the above said provisions while quoting his rates.

M&L for Renewing tiles in patches, area n exc. 5.00 sq. m including removing, cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles of glazed /non skid ceramic tiles white /coloured/parking as per the existing tiles and size as suitable/matching with the existing tiles in dados/ floors/ wall/parking including necessary cement work/white cement painting complete all as specified and directed.

M&L for painting work in patches area exc 2.5 sqm and n exc 10sqm for one coat of ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) on wall including preparation of exiting painted surface and repairing where required with putty along with full cleaning of paint/putty stains (Externally) complete all as specified and directed.

M&L for painting work in patches area exc 2.5 sqm and n exc 10sqm for one coat of oil bound distemper on wall/Ceiling including preparation of old surfaces by vacuum based sanding machine all as specified, removal of nails etc & filling cracks/holes by applying wall care putty to bring the surfaces even and smooth by auto roller along with full cleaning of paint/putty stains (Internally) complete all as specified and directed.

M&L for petty repairs in patches area n exc. 5.0 Sqm each patch to plaster, floor, plinth ,ceiling surface etc and like by PCC 1:2:4 Type B0 and plaster 15 mm thickness using ready mix plaster ( Ultratech/ READIPLAST RP) including bonding coat as per manufacturers instruction as in ceilings/walls etc incl preparing roughening and cleaning the surface and taking down old plaster, finishing even and smooth without using extra cement and removal of rubbish off the premises complete all as specified and as directed. Note: (a) The work described in these items above shall be executed in bldgs up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates. (b) Removing building materials /old waste unwanted existing material of any description or any type etc.on alternate day to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates. (c) For item of excavation to be carried out manually if during excavation there are any LT/HT cables, water supply pipe lines and other cable / pipe comes, need to be shifted carefully incl required fittings / accessories and cost of same to be deemed into quoted rates.

SAGAR ENTERPRISES (BID ID -3356328)

M/S SONU ENTERPRISES (BID ID -3345194)

M/S MSD & Associate (BID ID -3357479)

Tanveer Associates (BID ID -3355008)

sony engineering works (BID ID -3351946)

MRITUNJYA ASSOCIATES (BID ID -3354692)

B S R Enterprises (BID ID -3332410)

BEHAL TRADERS (BID ID -3357586)