Modification, improvement and beautification of courtyard and toilet (left side) of office at IIPA, Indraprastha estate, ring road, New Delhi

BILL OF QUANTITIES (BOQ)

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

1 CIVIL & INTERIOR WORKS 27,03,941.99 38,47,732.73

GRAND TOTAL 81,39,267.00

GRAND TOTAL 81,39,267.00

Digitally signed by AMIT

RENOVATION/ MODIFICATION WORKS AT IIPA, NEW DELHI (COURTYARD & TOILET BLOCK)

Summary of Civil and Interior Works

S.No. Description of Works Amount

Amount (SR, in Rs.)

2 Masonry & Plaster

3 Paving, Flooring & Wet Works

6 Finishes & Miscellaneous

GRAND TOTAL (Carried Forward) 65,51,674.71

GRAND TOTAL (Carried Forward) 65,51,674.71

Digitally signed by AMIT

RENOVATION/ MODIFICATION WORKS AT IIPA, NEW DELHI (COURTYARD & TOILET BLOCK)

S.No. Ref. No. / DESCRIPTION UNIT QTY DSR RATE AMOUNT MARKET RATE AMOUNT

1 DISMANTALING

Dismantling tile work in floors and roofs laid in cement mortar including stacking

material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 70.00 73.40 5,138.00

Demolishing brick work manually/ by mechanical means including stacking of

1.2 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as

per direction of Engineer-in-charge.

15.7.4 In cement mortar cum 8.00 2,060.20 16,481.60

Dismantling of PVC pipes including all clamps, bends etc. manually including

1.3 MR stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in- rmt 10.00 124.09 1,240.86

Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below each 7.00 367.20 2,570.40

Dismantaling of existing slab made out of RCC/ MS members and stone slab

including beams, steel sections. complete in all respects including cutting of steel

reinforcement, proping of adjoining structural member by manual or mechanical

means as per instructions of engineer -in-chage. The cost to include stacking of

useful materials near the site and disposal of unserviceable materials within 50 metres

Dismantling G.I. pipes (external work) including excavation and refilling trenches after

1.6 15.44 taking out the pipes, manually/ by mechanical means including stacking of pipes

within 50 metres lead as per direction of Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore metre 150.00 149.80 22,470.00

Dismantling C.I. pipes including excavation and refilling trenches after taking out the

pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead

and making into blocks including stacking of pipes & lead at site within 50 metre

lead as per direction of Engineer-in-charge:

15.45.1 Up to 150 mm diameter metre 30.00 332.40 9,972.00

Dismantling of plumbing pipes (CPVC/ GI/ CI, etc) including faucets, valves etc.

MR stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in- metre 100.00 124.09 12,408.65

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking

1.10 15.52 of useful materials near the site and disposal of unserviceable materials within 50 each 5.00 112.05 560.25

Dismantling of water closet, washbasin, urinal of all types (C.I./PVC/Vitrious China)

MR including stacking of useful materials near the site and disposal of unserviceable each 14.00 400.33 5,604.66

materials within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false

1.11 15.57 ceiling including disposal of unserviceable material and stacking of serviceable sqm 120.00 56.35 6,762.00

Digitally signed by AMIT

material with in 50 meters lead as directed by Engineer-in-charge SINGH

S.No. Ref. No. / DESCRIPTION UNIT QTY DSR RATE AMOUNT MARKET RATE AMOUNT

Shifting of existing pre-fab structure including disassembly, and assembling it at a

designated place as assigned by the engineer-in-charge. Complete in all respects.

The cost to include all necessary consumable and other accessories as required

Dismantalling of existing electrical services including all conduits, wires, swithces,

1.13 MR sockets, light fixtures, etc. including stacking of useful materials near the site and lot 1.00 15,000.00 15,000.00

disposal of unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to

approved municipal dumping ground or as approved by Engineer-in-charge,

beyond 50 m initial lead, for all leads including all lifts involved.

SUB TOTAL OF DISMANTALING 85,070.25 1,65,904.63

2 MASONRY AND PLASTER

Providing and laying in position ready mixed or site batched design mix cement

concrete for plain cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to

accelerate / retard setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering and finishing as per

direction of the engineer-in-charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in design

mix shall be payable separately. In case the cement content in design mix is more

than 110% of the minimum specified cement content, the contractor shall have

discretion to either re-design the mix or bear the cost of extra cement.

4.20.2 All works above plinth and upto floor V level

4.20.2.2 Concrete of M15 grade with minimum cement content of 240 kg /cum cum 1.50 9,341.80 14,012.70

Digitally signed by AMIT

S.No. Ref. No. / DESCRIPTION UNIT QTY DSR RATE AMOUNT MARKET RATE AMOUNT

Providing and laying in position ready mixed or site batched design mix cement

concrete for reinforced cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to

accelerate / retard setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of laying, curing, carriage

2.2 5.33 for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified cement content in design

mix shall be payable separately. In case the cement content in design mix is more

than 110% of the specified minimum cement content, the contractor shall have

discretion to either re-design the mix or bear the cost of extra cement.

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 9.50 9,860.40 93,673.80

Providing and laying autoclaved aerated cement blocks masonry with

150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to

floor V level with RCC band at sill level and lintel level with approved block laying

polymer modified adhesive mortar all complete as per direction of Engineer-in-

Charge. (The payment of RCC band and reinforcement shall be made for

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall

2.5 13.4 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up

to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases

2.6 5.3 and spiral stair cases up to floor five level excluding the cost of centering, shuttering, CUM 1.80 11,505.50 20,709.90

finishing and reinforcement, with 1:1.5:3 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size).

2.7 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

5.9.3 Suspended floors, roofs, landings, balconies and access platform SQM 60.00 927.25 55,635.00

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 55.00 736.40 40,502.00

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing

in position and binding all complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 576.00 107.85 62,121.60

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 840.00 107.85 90,594.00

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick

2.9 MR POP Punning over cement plaster in line & plumb finished smooth to receive paint. SQM 45.00 298.00 13,410.00

(Internal surfaces of walls).

Providing and applying white cement based putty of average thickness 1 mm, of

13.80 approved brand and manufacturer, over the plastered wall surface to prepare the SQM 400.00 156.05 62,420.00

surface even and smooth complete.

Digitally signed by AMIT

S.No. Ref. No. / DESCRIPTION UNIT QTY DSR RATE AMOUNT MARKET RATE AMOUNT

Providing and laying water proofing treatment in sunken portion of WCs, bathroom

etc., by applying cement slurry mixed with water proofing cement compound

consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with

water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air

2.10 22.5 cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with SQM 112.00 617.05 69,109.60

water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air

cure for 4 hours followed with water curing for 48 hours. The rate includes preparation

of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry

with polymer mixed slurry.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane

with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of

concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of

elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats

of undiluted elastomeric waterproofing liquid (dry film thickness of complete

application/system not less than 500 microns). The operation shall be carried out after

scrapping and properly cleaning the surface to remove loose particles with wire

brushes, complete in all respect as per the direction of Engineer-in-Charge.

SUB TOTAL OF MASONRY AND PLASTER 8,55,776.03 13,410.00

3 PAVING, FLOORING AND WET WORKS

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

3.1 8.31 Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar SQM 186.00 1,267.95 2,35,838.70

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade

Providing and laying matt finished vitrified tile of size 200x200x16mm having water

absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours

and shades in out door floors such as footpath, court yard multi models etc., laid on

20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes &

patterns including grouting the joints with white cement mixed with matching

pigments etc. complete as direction of Engineer-in-Charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more

(thickness to be specified by the manufacturer), of 1st quality conforming to IS :

15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red

Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing

with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement

and matching pigments etc., complete.

Digitally signed by AMIT

S.No. Ref. No. / DESCRIPTION UNIT QTY DSR RATE AMOUNT MARKET RATE AMOUNT

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix

of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg

of resin per kg), including filling / grouting and finishing complete as per direction of

Engineer-in-charge.

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets

with Granite stone top (with straight edge polished nosing) complete with base

cabinet made of 20mm BWP board, outside surface (shutters) finished in 1mm thick

Laminate of approved shade. All internal surfaces to have balancing laminate. The

rate inclusive of necessary hardware, handle lock sets, self closing hinges, spring

loaded shutter, latch inside, all cabinet hardware complete as per Architects

approval. (BR of stone to be taken as Rs 1600/Sqmt). Width of work top counter

600mm/ detailed drawings.

TOTAL FOR PAVING & WET WORKS 3,00,611.70 4,20,379.00

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per

IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges

of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling

with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts

of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm

each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64

mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and also including

the cost of making openings for light fittings, grills, diffusers, cutouts made with frame

of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 45.00 1,355.80 61,011.00

Digitally signed by AMIT

S.No. Ref. No. / DESCRIPTION UNIT QTY DSR RATE AMOUNT MARKET RATE AMOUNT

TRAP DOOR :- Providing and fixing trap door in false ceiling made of "Novapan "pre-

4.2 MR laminated board with hardwood framing, dead locks, lapping all around including SQM 1.00 3,108.04 3,108.04

all hardware, hinges etc. complete as per design and drawing.

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm

to macth the specifications same as gypsum ceiling.

Providing and fixing double scaffolding system (cup lock type) on the exterior side of

building/structure, upto 25 metre height, above ground level, including additional

rows of scaffolding in stepped manner as per requirement of site, made with 40mm

dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with

cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system

in the scaffolding for working platform etc. and maintaining it in a serviceable

4.4 condition for execution of work of cleaning and/ or pointing and/ or applying sqm 400.00 338.25 1,35,300.00

chemical and removing it thereafter. The scaffolding system shall be stiffened with

bracings, runners, connecting with the building etc, wherever required, if feasible, for

inspection of work at required locations with essential safety features for the workmen

etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The

elevational area of the scaffolding shall be measured for payment purpose. (2) The

payment will be made once only for execution of all items for such works.

Supply and installation of Wall Panelling with 6 mm thk HPL(High Pressure Laminate)

Quality panels of standard size (1300 X 2800 mm)with both side décor.The material

should be have Non-fading high performance acrylic polyurethane surface

technology) conforming to ISI norms with CE Mark. Panels are double hardened

including acrylic polyurethane resin which is thermally cured under high

4.5 pressure.Installation of HPL panels will be done by 3M Adhesive tape in any direction SQM 215.00 5,373.90 11,55,388.72

as per insruction of Site Engineer(with Fixed and Sliding Points) with minimum

recommended Aluminum section of 100 x50 x 2 mm thick and L section 50 x 50 x

2mm thick held by Wall Bracket with Wind load and Dead load slot as per design,

anchored by standard Hilti/Fischer or equivalent make anchor fasteners a.completed

as per manufacture specification/EIC. If

SUB TOTAL OF CEILING 1,96,311.00 11,69,721.76

5 DOORS/ WINDOWS

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast lugs or with

dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid

for separately).

9.1.1 Second class teak wood CUM 0.80 1,42,949.70 1,14,359.76

Digitally signed by AMIT

S.No. Ref. No. / DESCRIPTION UNIT QTY DSR RATE AMOUNT MARKET RATE AMOUNT

LAMINATED FLUSH DOOR- Flush Doors finished using 1mm Thick Laminate on both sides

panel of size upto 2400mm x 1000mm complete with Hardware including hinges,

5.2 MR Door Closer, Mortice Lock with Handle, latches etc. including cost of Door frame with Nos 6.00 18,054.07 1,08,324.43

melamine/ duco finish. The cost to include providing and fixing of vision panel as per

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm

STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door

Frame formed out of 45* 40mm / 50*50mm of 6063-T6 Virgin grade duly Anodized

Aluminium, including 10 mm Toughened Glass. The cost to include hardware like Door

Closure, 4nos Hinges, Lever Handle with mortice lock, Door Seal & Gaskets etc. in

approved shade and design as per architectural drawings and instructions of the

architect. The size of door shall be upto 1500mm X 2400mm. (double shutter)

UPVC Windows : Supply and Fixing of Tripple Track/ Tripple Channel UPVC Windows,

DGU/ Sandvich Glasses (6 mm Reflective Glass + 10 mm Air Gap + 6 mm Plain

Toughned Glass) on two tracks and SS Mesh on One Track, complete as per the

requirement of engineer in charge.

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door

stopper with necessary screws, etc. complete.

SUB TOTAL OF DOORS 1,24,544.76 2,47,801.43

6 FINISHES & MISCELLANEOUS

Applying priming coats with primer of approved brand and manufacture, having low

VOC (Volatile Organic Compound ) content.

With water thinnable cement primer on wall surface having VOC content less than 50

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand

and manufacture, including applying additional coats wherever required to achieve

even shade and colour.

6.3 13.110 Finishing walls with textured exterior paint of required shade :

Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10

Designing, supplying and installation of CNC cut jaali made out of 4 mm thick MS

sheet finished with approved metallic/duco paint or as per approval and instructions

of engineer-in-charge. The cost to include all required fixing frame and accessories

complete as required.

Digitally signed by AMIT

S.No. Ref. No. / DESCRIPTION UNIT QTY DSR RATE AMOUNT MARKET RATE AMOUNT

Providing and supplying aluminium extruded tubular and other aluminium sections as

per the architectural drawings and approved shop drawings , the aluminium quality

as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of

60-80 microns conforming to AAMA 2604 of required colour and shade as approved

by the Engineer-in-Charge. ( The item includes cost of material such as cleats,

sleeves, screws etc. necessary for fabrication of extruded aluminium frame work.

Nothing extra shall be paid on this account). The weight of aluminium extruded

section shall be taken for purpose of payment.

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing

6.6 10.25 in position and applying a priming coat of approved steel primer using structural steel

etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 400.00 172.60 69,040.00

Painting with synthetic enamel paint of approved brand and manufacture to give an

13.61.1 Two or more coats on new work SQM 250.00 155.90 38,975.00

Preparation of complete set of civil and interior finishing drawings including details. A

6.8 MR qualified professional for the purpose shall be appointed after due appproval from nos 1.00 81,393.00 81,393.00

Engineer In Charge.

Design Casting and Installation of Wall Mural made of Resin based fibre. Mural shall

be sculpted as per design; minimum thickness should be 30 MM and maximum relief

thickness will be 60MM depending on design. Casting is done with Fibre Glass which

consists of high quality Resin compost marble,Fibre matt 450 mm ,Cobalt and

Hardener . Weather coat Duco paint will be applied for final finish. The cost to

include installation on wall with MS frame 80MM with fibre coating to make it

weather resistant and long life, complete using all required fixing accessories and

hardware as pre instructions of client/ engineer-in-charge.

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and

colour using approved Adhesive to 12 mm thk. Waterproof Plywood of approved

brand as per shape, pattern & details given in the drawing. The rate includes

providing & fixing beading, cutting, scaffolding, nails, all materials, labour, lead, lifts,

HOM etc., complete.-for Lift Cladding. (The make, Shade, pattern etc., to be

approved by Architect).

SUB TOTAL OF FINISHES 11,41,628.25 18,30,515.91

Digitally signed by AMIT

RENOVATION/ MODIFICATION WORKS AT IIPA, NEW DELHI (COURTYARD & TOILET BLOCK)

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 0.00 4,44,970.82

B WATER SUPPLY 1,44,010.55 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 2,71,545.70 0.00

Total Cost ( Carried Forward) in Rs. 8,60,527.07

Digitally signed by AMIT

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Supply, installation, testing and commissioning of glazed vitreous china single trap syphonic pattern having back inlet,

supporting chair, wall hung water closet complete with all internal fittings/ accessories and CP brass flush bend (European

type) water closet with seat and lid, with C.P. brass hinges and rubber buffers, adapter, rubber joints fixed to W.C., C.P.

brass screwed washers including cutting and making good the walls and floors wherever required and HDPE WC pan

connector including jointing with white cement complete in all respects.

Wall hung W.C. pan (White colour)with white plastic seat & lid "Thermoset moulded ( bakelite ) IS 2548 Part I Each 4 20,044.00 80,176.00

Supply, installation, testing and commissioning of concealed cistern including flush plate and all internal fittings/

accessories including cutting and making good the walls and floors wherever required complete in all respects. Each 4 12,052.00 48,208.00

Providing & fixing vitreous chinaware urinal comprising Large flat back wall hung urinal in glazed vitreous China urinal 15

3 MR mm electrically operated solenoid valve with infra red sensor mounted in a box with SS Cover. CP brass chromium plated

flush piping from solenoid valve to urinal terminated with a 15 mm screwed spreader 32 mm nominal bore CP cast brass

waste 32 mm nominal bore CP cast bottle trap with extension pipe rubber adopter for waste connection, CP brass wall

For supply,installation,testing & commissioning of sanitary fixtures(white colour) as per above details. Each 3 26,828.00 80,484.00

Supply, installation, testing and commissioning of glazed vitreous china wash basin with R.S. or C.I. brackets painted white,

32mm C.P. brass waste of standard pattern , C.P brass wall flange 32 mm dia. C.P. brass bottle trap and union 32 mm dia

C.P. pipes to wall flange. complete including cutting and making good the walls wherever required.

Table top wash basin Each 5 12,007.00 60,035.00

5 MR Supply, installation, testing and commissioning of 15mm C.P. brass single hole wash basin mixer without popup waste

system with 450mm long copper pipes and brass nut Each 5 6,064.37 30,321.87

6 MR Providing & fixing toilet paper holding including cutting and making good the walls. Each 4 1,566.63 6,266.50

Providing & fixing Horizontal liquid soap dispenser with stainless steel lid and brackets fixed to wooden cleats with C.P.

7 MR brass screws.

8 MR Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P. brass screws Each 4 618.70 2,474.80

Providing & fixing beveled edge mirror 5.5mm thick of superior quality plate glass complete with 6mm thick marine ply

sheet ground fixed to wooden cleats with CP brass screws and washerswith 40 mm wide teak wood frame as per design

including polishing

Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long PVC tube and wall hook CP brass wall flange Each 4 1,786.14 7,144.57

Providing & fixing, testing and commissioning of storage type electric water heater with automatic thermostatic control

electric element, pressure release valve, brackets fixed to expansion fasteners with M.S. nuts and bolts all complete

including cutting and making good the walls wherever required.

Digitally signed by AMIT

SL. NO. DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

05 litres capacity (Horizontal /Vertical type1.5 kw electrical load). Each 4 11,963.35 47,853.39

Providing & fixing wall mounted 25 mm dia Stainless steel coated grab bar including cutting & making good the walls(size

12 MR 450mm long)

13 MR Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of approved quality. Each 5 1,585.89 7,929.44

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of Automatic Fragrance Dispenser machine complete with refill

can and 'C' size battery (2 Nos) for operation fixed to wooden cleats with CP brass screws Each 2

Providing and fixing of stainless steel finish Paper Towel Dispenser having capacity of 300-350 paper towels fixed to

wooden cleats with C.P. brass screws Each 2

Providing and fixing of wall mounted fully automatic hand dryer in SS/ black finish as per approval complete will all

accessories. Each 2

Detail of Sanitary fixture are for the information of the Contractor,however model/makes of all sanitary fixtures shall be

selected by Architect/Interior designer/Project manager and the same shall be binding for execution.

ii. No additional fixing cost shall be paid for change in type of sanitary fixtures.

iii. Contractor to receive all the above mentioned items & store at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 4,44,970.82

Digitally signed by AMIT

SUB HEAD B: WATER SUPPLY

SL. DSR- DSR Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

(CPVC) plain & brass threaded fittings including fixing the pipe

with clamps at 1.00 m spacing. This including jointing of pipes &

fittings with one step CPVC solvent cement and testing of joints

complete as per direction of engineer in charge. .

Internal Work - Exposed on Wall

18.7.5 40 mm nominal outer dia pipes. Metre 10.00 702.95 7,029.50

18.7.6 50 mm nominal outer dia pipes. Metre 10.00 934.15 9,341.50

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings i/c fixing the pipe with

2 18.8 clamps at 1.00 m spacing. This including jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting

chases and making good the the same including testing of joints

complete as per direction of engineer in charge.

Concealed work including cutting chases and making good the

18.8.2 20 mm nominal outer dia pipes. Metre 65.00 537.60 34,944.00

18.8.3 25 mm nominal dia Pipes Metre 65.00 627.25 40,771.25

18.8.4 32 mm nominal dia Pipes Metre 45.00 739.30 33,268.50

Providing and fixing brass stop cock of approved quality

18.16.1 15 mm nominal bore Each 4.00 353.25 1,413.00

18.16.2 20 mm nominal bore Each 4.00 379.20 1,516.80

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end):

18.17.1 25 mm nominal bore Each 4.00 622.40 2,489.60

Digitally signed by AMIT

SL. DSR- DSR Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

18.17.2 32 mm nominal bore Each 4.00 689.60 2,758.40

Providing and fixing C.P. bass angle valve for basin mixer and

5 18.53 geyser points of approved quality conforming to I.S:8931 a) 15

mm nominal bore.

18.53.1 15 mm nominal bore Each 6.00 574.30 3,445.80

Providing and fixing unplasticised P.V.C connection pipe with

PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 24.00 121.90 2,925.60

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 1,44,010.55

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR-2023 DSR Rate NS Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing cast iron trap of self cleansing design with cast

iron screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the walls and

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S as

2 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 20.00 1,180.75 23,615.00

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 25.00 1,186.00 29,650.00

Providing and fixing single equal plain junction of reqd. degree with

3 17.43 access door, insertion rubber washer 3mm thick, bolts and nuts

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 4.00 925.70 3,702.80

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 4.00 665.05 2,660.20

4 17.44 Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 4.00 811.90 3,247.60

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 4.00 561.20 2,244.80

Providing and fixing bend of required degree with access door,

insertion rubber washer 3mm thick, bolts and nuts complete.

Digitally signed by AMIT

SL. DSR-2023 DSR Rate NS Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 4.00 705.20 2,820.80

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 4.00 522.80 2,091.20

6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 5.00 570.05 2,850.25

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 4.00 390.50 1,562.00

7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 4.00 513.15 2,052.60

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 4.00 362.05 1,448.20

Providing and fixing MS holder bat clamps of approved design to cast

iron (spun) pipe embedded in and Including cement concrete blocks

8 17.37 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) including cost of cutting holes and

making good the walls etc.

Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps.

including cutting and making good the walls etc.

18.10.4 32 mm nominal bore Metre 50.00 667.00 33,350.00

18.10.5 40 mm nominal bore Metre 50.00 811.90 40,595.00

Painting G.I. Pipes and fittings with two coats of anticorrosive

bitumastic paint of approved quality

18.40.4 32 mm nominal bore Metre 50.00 22.20 1,110.00

18.40.5 40 mm nominal bore Metre 50.00 25.25 1,262.50

Digitally signed by AMIT

SL. DSR-2023 DSR Rate NS Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty

18.40.6 50 mm nominal bore Metre 25.00 30.50 762.50

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste

and vent pipes and fittings with paint of any colour such as

chocolate, grey or buff etc. over a coat of primer (of approval

quality) for new work

17.65.1 100mm dia cast (spun) iron S&S pipe Metre 20.00 82.80 1,656.00

17.65.2 75mm dia cast (spun) iron S&S pipe Metre 25.00 62.95 1,573.75

Providing lead caulked joints to sand cast iron/centrifugally cast(spun)

iron pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement

mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

15 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 4.00 1,032.40 4,129.60

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement

: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5

coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal

size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-

III) : 8 graded stone aggregate 40 mm nominal size), inside plastering

16 19.7 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement and making channels in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) finished with a floating coat of neat

cement complete as per standard design :

Digitally signed by AMIT

SL. DSR-2023 DSR Rate NS Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame

(light duty) 455x610 mm internal dimensions, total weight of cover and

frame to be not less than 38 kg (weight of cover 23 kg and weight of

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Constructing brick masonry road gully chamber 50x45x60 cm with

bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including

500x450 mm pre-cast R.C.C. horizontal grating with frame complete

as per standard design :

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C.

pipes including collars/spigot jointed with stiff mixture of cement

mortar in the proportion of 1:2 (1 cement : 2 fine sand) including

testing of joints etc. complete

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

19 12.41 conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

Digitally signed by AMIT

RENOVATION/ MODIFICATION WORKS AT IIPA, NEW DELHI (COURTYARD & TOILET BLOCK)

SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

2 LIGHTING FIXTURES Rs. 7,092.00 Rs. 72,826.00

3 CABLE TRAY Rs. - Rs. 47,880.00

4 FIRE DETECTION Rs. - Rs. 80,397.00

GRAND TOTAL Rs. 7,27,065.00

GRAND TOTAL Rs. 7,27,065.00

RENOVATION/ MODIFICATION WORKS AT IIPA, NEW DELHI (COURTYARD & TOILET BLOCK)

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V grade 1.5 sqmm &

one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in & including 25 mm dia , MS conduit

surface/ concealed in wall / ceiling conferming to IS 732 including all accessries such as junction boxes ,

conduit bends, elbows and ceiling rose , and anodised GI switch box with modular switch ,modular plate

and the box covered with front plate

a 1.3.3 One light point controlled by one 6A switch Per Pts 30.00 1,845.00 55,350.00

Secondary light point controlled by same switch

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper

1.2 1.7 conductor, single core cable in surface/ recessed steel conduit as required.

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire 120.00 327.00 39,240.00

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per

2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per

1.3 1.3.3 Exhaust fan point including of ceiling rose near fan. Per Pts 2.00 1,845.00 3,690.00

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated copper

conductor cable drawn through 25 dia MS conduit laid in surface/concealed over false ceiling or in

slab/wall chases including ,2way modular switches,modular plate ,suitable GI box and earthing the point

with 1.5 sqm FRLS PVC insulated copper conductor single core cable as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 2.00 122.00 244.00

d 1.24.5 6 pin 15/16 A socket outlet Each 4.00 197.00 788.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular

switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as

Dismanting of old wiring, stacking all of it, dismanting of old conduits, ducts, hangers, suspension system etc

1.9 MR and repair/ grouting of ceiling after dismantling. It also includes dismantling of old DBs and repairing the nos 1.00 1,00,000.00 1,00,000.00

Digitally signed by AMIT

RENOVATION/ MODIFICATION WORKS AT IIPA, NEW DELHI (COURTYARD & TOILET BLOCK)

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess including

1.10 1.20 painting in case of surface conduit,or cutting the wall and making good the same in case of recessed

conduit as required

Total of Wiring carried over to summary 1,00,000.00 4,18,870.00

2 LIGHTING FIXTURES

2.1 1.9 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt)

Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body

material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver

efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40

deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.

F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary),

of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K /

5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power

consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and

trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on

housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor

single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy

≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as

per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per

requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature

shall not rise above 90°C).

Powder coated die cast / Extruded aluminium Body (Thickness

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all hardware and connectors etc., as

per the direction of the engineer In charge

1.3 LED Down lighter (SMD Type) (System lumen efficacy >135 lm/Watt)

Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round

/square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and

construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating

voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge

protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified

Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life

time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends as per LM80

extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K / 6000°K /6500°K (As per ANSI Bin) ,

SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the

specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.).

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its

own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections

with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from

NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as

approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum

housing such that LED junction temperature shall not rise above 90°C).

Powder coated die cast / Extruded aluminum Body including trim. each 26.00 749.00 19,474.00

Digitally signed by AMIT

RENOVATION/ MODIFICATION WORKS AT IIPA, NEW DELHI (COURTYARD & TOILET BLOCK)

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

2.3 1.5 LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt )

Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round / square/

Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the

requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp

range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection

,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5

%), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial

Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin),

SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the

specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.).

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its

own in house NABL lab setup for all testing facilities for LED fixtures. "complete in all respect i/c connections

with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report

from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall

be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum

housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded

aluminium Body including trim with Aluminium Reflector

Digitally signed by AMIT

RENOVATION/ MODIFICATION WORKS AT IIPA, NEW DELHI (COURTYARD & TOILET BLOCK)

DSR-2022/ Description

S.No Unit Qty Rate MR Amount DSR Amount

Total of Light Fixture carried over to summary 7,092.00 72,826.00

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels fabricated out of 10 mm

dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats etc.complete with providing of Anchor fastners

3.1 and all necessary hardwares as required for fixing, including cutting, bending, welding, drilling, bolting etc.

as per design as required and painted with one coat of primer and two coats of enamel paint of

approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of following sizes

complete with bend/tee joints, coupling plate & nuts bolts etc. as required for fixing and including the cost

of providing loop earthing with 2 nos. 50 mm x 6 mm GI earth strips complete as per specifications, as

required and as below.

Total of cable tray carried over to summary 0.00 47,880.00

Digitally signed by AMIT

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No DSR 2022. No. Description Unit Qty Unit Rate Total amount Total amount

Sr. No DSR 2022. No. Description Unit Qty Unit Rate Total amount Total amount

Supplying, installation, testing & commissioning of intelligent analog

1 17.2.4 addressable photothermal detector complete with mounting base Pcs 7.00 2,858.00 20,006.00

complete as required.

Supplying, installation, testing & commissioning of addressable manual call

point complete as required.

Supplying, installation, testing & commissioning of addressable strobe

complete as required.

Supplying, installation, testing & commissioning of fault isolator complete

with base as required.

Supplying, installation, testing & commissioning of response indicator on

5 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all Pcs 2.00 276.00 552.00

connections etc as required.

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V

1 17.5.2 rated with annealed copper conductor having XLPE insulation, steel wire RM 80.00 173.00 13,840.00

armouring & FRLS outer sheath complete as required.

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of ceiling/wall mounted loud

speaker, 3/1.5 Watt in ABS enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated copper

conductor cable in the existing surface / recessed steel conduit of following

pairs, cores and size including connections and interconnections etc. as

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 100.00 54.00 5,400.00

Supply and fixing of following sizes of MS conduit along with accessories in

2 1.20 surface /recess including painting in case of surface conduit,or cutting the

wall and making good the same in case of recessed conduit as required

Digitally signed by AMIT