Repairing of pumping machinery and allied works at P.H. No. High Lift of Taki Municipality Ground water-based W/S Scheme under EMSD-I, PHE Dte.in 24Pgs(N).

Amount

Dismantling the existing damaged valves , pipes & allied from its existing position all complete.

Supply, delivery and storage at site Lift Type 150 mm Foot valve combined with stainer as per IS : 4038 PN-0.6.(AT SUCTION HEADER ) (Make - IVI/Jupiter/ Durga/other approved make)

Supply, delivery and storage at site 150 mm dia double flanged Cast Iron manually operated non-rising spindle sluice valve generally conforming toIS:14846 PN-1.0. (AT SUCTION HEADER ) (Make - IVI/Jupiter/ Durga/other approved make)

Supply, delivery and storage at site of CI doble flanged single door swing check 100 mm dia N.R.V as per IS : 5312, Part-I, PN-1.0 . (AT DELIVERY SIDE OF PUMP) (Make - IVI/Jupiter/ Durga/other approved make)

Supply, delivery and storage at site 100 mm dia double flanged Cast Iron manually operated non-rising spindle sluice valve generally conforming toIS:14846 PN-1.0. (AT INDIVISIUL DELIVERY HEADER ) (Make - IVI/Jupiter/ Durga/other approved make)

Supply, delivery and storage at site of CI doble flanged single door swing check 150 mm dia N.R.V as per IS : 5312, Part-I, PN-1.0 . (AT Common DELIVERY SIDE OF PUMP) (Make - IVI/Jupiter/ Durga/other approved make)

Supply, delivery and storage at site 150 mm dia double flanged Cast Iron manually operated non-rising spindle sluice valve generally conforming toIS:14846 PN-1.0. (AT Common DELIVERY HEADER ) (Make - IVI/Jupiter/ Durga/other approved make)

Fitting fixing of above supplied valves with supply of necessary nut bolts gasket etc. with proper allinmenti as per direction of EIC.

Dismantling the existing MCC Panel & allied from its existing position all complete.

Installation the existing MCC Panel & allied on floor by making suitable foundation all complete.

Plastering of wall after chipping the old plaster properly along with painting of wall of inside of pump house as per direction of EIC.

Repairing of pump-motor foundation after chipping the old plaster properly and making neat cement complete as per direction of EIC.

Making gland water removal arrangement by supplying suitable size pipe and specials as per direction of EIC(For 03 Nos. pump)

Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per direction of EIC.

Supply & delivery at site of 10 Sq. mm. 1.1 KV grade single core Cupper conductor P.V.C. insulated wire NB: Cable to be supplied as per sire requirement. ( Make: Finolex/GLOSTER/NICCO/Polycab / Havell’s/Mescab)

Laying of wire as in item no. 7 on wall/surface including S&F of MS saddles with necessary mending good damages and paint all complete.

Withdrawing of damaged 20HP Split casing centrifugal pumping machinery set from its foundation after decoupling of pump motor set and disconnecting all pipe lines, power connection etc as per direction.

Carrying the damaged 20HP Split casing centrifugal pumping machinery set from worksite to work-shop including loading and unloading for repairing.

Dismantling the pump part by part for necessary repairing.

Supply of spares for pump :- Bush

Supply of spares for pump :- Impeller Neck ring

Supply of spares for motor :- Bearing(6309-2Z)

Rewinding of the motor(20HP) with suitable method and necessary materials including assemble with bearing all complete as per direction of E.I.C. (01No. Motor).

Reassembling the pump with all new & old serviceable spares after repairing.

Carrying the repaired 20 HP pumping machinery set from work-shop to worksite for installation.

Installation of the repaired P/M at suitable position and connection with delivery pipe line and power connection complete upo entire satisfaction of E.I.C.

Supply fitting fixing of (0 - 7 Kg/cm2) Pressure Gauge.

Making internal/external electrification of P/House by 2 x 1.5 sq.mm. P.V.C. cu wire through suitable size casing/capping for 4 nos. point ( 1 no. bracketpoint , 1 no. tube light point , 1 nos. bulk head point and 1 fan point ) and 1 no. 5A ,5 pin plug point with earthing attachment of 1 x 1.5 sqmm cu. Wire with supplying of tube light fittings , bulbs & 1200mm sweep celling fan(Make-As per approved vendor list.) as per approved make including suppying and fixing 10 A. DP MCB (As per approved vendor list.) make on wall all complete as per I.E. rules and direction. (including making external illumination by Supply & fixing of 1 no. 40W LED IP 66 type outdoor luminairie incl. Supply & installation of MS bracket & connection complete).

Supply fitting fixing of 12'' Sweep wall fan Make - Havells/ CGL/Orient/approved make..

Testing, Commissioning the whole installation upto entire satisfaction of E.I.C.

Add: GST @ 18%

Add: Cess @ 1%

TAKE ME INDIA (BID ID -6314509)

S.M.S. ENTERPRISE (BID ID -6314490)