WBMAD/DKM/CP/e-NIT-130/2025-26 (SL-5)

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety

BENCH WITH FIXED WEIGHT LIFT Dimensional Description • Overall Size: 1600 mm (L) × 650 mm (W) × 900 mm (H) • Seat Height: 450 mm • Backrest Length: 800 mm • Weight Lift Bar Width: 1100 mm • Ground Clearance: 150 mm Pipe Description • Main Frame: 50 mm × 50 mm MS square pipe, thickness 2.5 mm • Support Frame: 40 mm × 40 mm MS square pipe, thickness 2.0 mm • Seat Support: 32 mm round pipe, thickness 2.0 mm • Weight Rod: 32 mm round MS Color Description • Frame: Sky Blue (Outdoor PU Coating) • Seat & Backrest: Yellow/Orange UV-resistant FRP • Fasteners: Zinc-coated / SS hardware (SUPPLY ALL THE MATERIALS NOTED ABOVE ARE IN GOOD CONDITION AND INSTALLATION COMPLETE)

PARALLEL BAR (OUTDOOR) Dimensional Description • Total Length: 2500 mm • Height from Ground: 1100 mm – 1200 mm • Bar Spacing (center to center): 520 mm • Handle Length: 2000 mm • Ground Pole Diameter: 100 mm Pipe Description •Main Upright Posts: 76 mm round pipe, thickness 3.0 mm •Horizontal Bars: 48 mm round pipe, thickness 2.5 mm •Base Support: 50 × 50 mm MS square tube Color Description •Frame: Dark Green / Sky Blue powder-coated •Bars/Handles: Yellow anti-slip finish •Anti-rust undercoat: Epoxy primer (SUPPLY ALL THE MATERIALS NOTED ABOVE ARE IN GOOD CONDITION AND INSTALLATION COMPLETE)

SIT-UP BOARD / ABDOMINAL BOARD Dimensional Description • Overall Size: 1800 mm (L) × 600 mm (W) × 850 mm (H) • Board Length: 1500 mm • Board Width: 450 mm • Incline Height: 850 mm (top) • Foot Roller Height: 420 mm Pipe Description • Main Frame: 50 × 50 mm MS square pipe, thickness 2.5 mm • Board Support Tubes: 40 mm round pipe, thickness 2.0 mm • Foot Rollers: 32 mm round pipe with foam or FRP covers Color Description • Frame: Green / Blue PU outdoor finish • Board Top: Yellow/Red FRP panel (UV-resistant) • Rollers: Black/Blue padded rollers (SUPPLY ALL THE MATERIALS NOTED ABOVE ARE IN GOOD CONDITION AND INSTALLATION COMPLETE)

SHOULDER WHEEL (SINGLE OR DOUBLE) Dimensional Description • Total Height: 1700 mm • Wheel Diameter: 950–1000 mm • Handle Grip Length: 250 mm each • Base Width: 600 mm Pipe Description • Upright Post: 76 mm round pipe, thickness 3.0 mm • Wheel Frame: 32 mm round pipe, thickness 2.0 mm • Handle Arm: 25 mm round MS pipe • Bearings: Sealed ball-bearing system Color Description • Post: Sky Blue powder-coat • Wheel: Bright Yellow with anti-rust coating • Handles: Black rubber grip (SUPPLY ALL THE MATERIALS NOTED ABOVE ARE IN GOOD CONDITION AND INSTALLATION COMPLETE)

DOUBLE TWISTER (STANDING TWISTER) Dimensional Description • Height: 1400 mm • Platform Diameter: 350 mm each (two platforms) • Base Width: 750 mm • Hand Support Width: 600 mm Pipe Description • Center Post: 89 mm round pipe, thickness 3.0 mm • Platform Support Shaft: 38 mm round pipe, thickness 2.5 mm • Hand Support Frame: 32 mm round pipe • Twister Bearing: Heavy-duty thrust bearing Color Description • Center Post: Green / Blue outdoor PU-coated • Platforms: Yellow textured anti-slip FRP • Hand Support: Red/Yellow finish (SUPPLY ALL THE MATERIALS NOTED ABOVE ARE IN GOOD CONDITION AND INSTALLATION COMPLETE)

Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] Red Variety (ii) 30 mm. thick

providing and fixing concrete sign board as per IRC specification of size 900 x 750 x 37 thik made with RCC 1:1.5:3 with pakur variety store chips reinforced with double layer IRC fabric 75 x75 mm mesh and fixed with necessary nuts and bolts on two RC precast post 100mm x 150 mm of height 2.65 metres of which top 750 mm is of Section 100x13 mm and 1.90 m above G.L & 0.75m below G.L including digging hole repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. effort direction of the engineering in charge

G.S.T (SGST 9%+CGST 9%)