Planning, Design, Engineering, Construction and other works for Coal Handling Plant at Khadia project as per NIT

Amount

A. WORK & SERVICES

Detailed survey of the area, within the battery limits & submission of reports

Sub soil exploration, field and laboratory testing of samples & submission of reports

3. Design Engineering Cost

Preparation and submission of system engineering drawings as per system requirements

GA & detail engineering designs and drawings of all civil and structurals included in the system and scope of works

G.A. & detailed engineering designs and drawings including working and maintenance manuals of : i) All individual equipment ( Mechanical & Electricals) ii) Dust Control & Pressurisation system. iii) Fire-fighting and plant cleaning system. iv) Chutes & Liners v) Communication system vi) Power Supply System vii)Illumination system. ix) Plant control system x) OHE System x) Any other system/unit to match the scope of work & requirement

Documentation as per tender specification

B. CIVIL & STRUCTURAL WORKS

I. Civil and structural work

Truck Receving Hopper (4x100 Te) including RCC retaining wall

Truck Receving Platform including Pavement over approach ramp

Conveyor Gantry/Gallery with supporting structures

Transfer House/Drive Houses , Sampling House

15000 Te Over Ground Bunker including maintenance bay

2x 500 Te Surge Hopper including liftwell

RCC Rail Over Bridge for 190T dumper including ramp on both side, wing walls and ramp for coal transport road

Temporary diversion of dumper road to workshop

CTR and LMV road near Bunker area

II. Developmental work and infra-structure

CHP Office Complex: CHP office, Rest Shelter, First Aid centre, Time & Security office, LMV/Car Parking Shed and Scooter/motor cycle Shed.

Store cum maintenance workshop

1 nos. Pump house

2 Nos. Electrical Sub-station building

Lighting Mast

Internal Approach road/ Service road 3.75m Wide (All Transfer houses, over Ground Bunker, Loading Stations etc. shall be connected with 3.75 m wide carriage way)

Drain

RCC Hume Pipe Culvert

RCC Culvert

Boundary Wall with gate

PVC Over Head Tank

Ground water reservoir

Filterred Water supply distribution

Collection sumps and arrangement for conveying of Industrial Effluent to existing ETP

Sewerage

Landscaping and Arboriculture

Site Development (includes Embankment for road, chanellising of nallah, levelling and storm water drains)

C. PLANT & MACHINERY ( SUPPLY)

C.(a) SUPPLY : MECHANICAL

CONVEYORS

BELTING

C. EQUIPMEMT

Receiving Section Mechanical Equipment

Mechanical Equipment in Storage Section

Mechanical Equipment at Transfer house

Mechanical equipment at Loading Complex

OHE Equipment including mechanical, electrical and civil requirement

Other mechanical equipment

Dust suppression system with piping & other accessories. Condition monitoring system, Safety & firefighting system , and other misc. equipment/utility for any more item required to complete the project

C.(b) SUPPLY : ELECTRICAL

I. ELECTRICAL

Substation- A (SS-1)

Substation-A(SS-1) Power receiving arrangment from substation A(SS-1) with Lightning Arrester and Isolator with earth switch as required. 6.6/0.433 kV, 750 KVA Distribution transformer-2nos. 6.6/0.230 V (L-L), 100 kVALighting Transformer-2nos. 220V Lead Acid Battery complete with Battery Charging unit.-1 no. 6.6 kV 3 Phase, 3 Wire Switchboard 1A & 1B (Indoor ) Comprising of Incomer VCB, Buscoupler VCB and Outgoing VCBs/VCPs complete with metering and protection as required 415V,Aluminium Bus-duct as required. MCC at Substation-A Comprising of Incomer ACB, Buscoupler ACBs and Outgoing ACBs/MCCB/SFU/ Contactor as required. 6.6 kV and 415 V Capacitor with Automatic power factor correction of required capacity Banks for power factor improvement as required. 6.6 kV Double Circuit Overhead line comprising of AAAC ’Wolf’ equivalent Conductor for power supply as required. Fire detection, Alarm and Protection system.

Substation-B (SS-2)

Substation-B(SS-2) Power receiving arrangment from substation B(SS-2) with Lightning Arrester and Isolator with earth switch as required. 6.6/0.433 kV, 1000KVA Distribution transformer-2 nos. 6.6/0.230 V (L-L), 100 KVA Lighting Transformer-2 nos. 220V Lead Acid Battery complete with Battery Charging unit.-1 no. 6.6 kV 3 Phase, 3 Wire Switchboard 2A (Indoor ) Comprising of Incomer VCB, Buscoupler VCB and Outgoing VCBs/VCPs, Metering and protection as required 415V,Aluminium Bus-duct as required. MCC at Substation-C Comprising of Incomer ACB, Buscoupler ACBs and Outgoing ACBs/MCCB/SFU/ Contactor as required. 6.6 kV and 415 V Capacitor with Automatic power factor correction of required capacity Banks for power factor improvement as required. 6.6 kV Double Circuit Overhead line comprising of AAAC ’Wolf’ equivalent Conductor for power supply as required. Fire detection, Alarm and Protection system.

C. Cables

Power Cables

Control & Signalling Cables

Lighting Cables & wires

Communication Cables

D. Earthing

Plant Equipment Earthing

Structures Earthing

Earthing for Lightning Protection

Tranformer neutral Earthing

Welding Sockets and Electical & Diesel Welding Set

PLC System for Control & Automation,Interlocks, Signalling and instrumentation of entire CHP.

Remote and sequence control equipment & Accessories

Cable Trays, Cable Racks, Cable Trenches, Cable Voults etc.

Illumination System and Luminaires, Lighting poles & Towers, Lighting DBs etc.

DG sets for Emergency Power Supply.-2 nos.

Exhaust Fan, Ceiling Fan, Air Conditioner, insulating Mats etc.

Computers and Peripherals

Communication System

Traffic Control Console

C1 ERECTION, INSTALLATION & COMMISSIONING

Erection of mechanical equipment

Erection of electrical equipment

Erection of other plant and machining etc.

Trial run, and commissioning of the plant

C2 . OTHERS ITEM

Drinking water system consisting of tanks, pipes, valves, taps etc.

Plant cleaning system

Any other item left out for completion of the project

C3 . MAINTENANCE AND TRAINING

Operation of the plant for five years as described in Tender document

Maintenance of the plant for five years as described in Tender document

Training of the employer personnel as per tender document

Total impact of GST for the purpose of CTC

M/s HAMTEK TECHNOLOGIES INDIA PRIVATE LIMITED