Loading
Loading…
Loading…
Tender Value
₹7.3 L
EMD Value
₹14,628
Closing Date
15 Jun 2026, 3:00 pmDue tomorrow
EE, NACD, APWD, Mayabunder
EE, NACD, APWD, Mayabunder
A/R M/O of Non Residential building under Sub - Division No.I, NACD, APWD, Mayabunder.SW-Providing and fixing roofing sheet and laying Hollow block walling above the Kitchen area of APWD Guest House, Mayabunder.
2026_APWD_23326_1
e-Quotation/NACD/MB/26-27/1846
Open Tender
Civil Works - Others
45 days
EE, NACD, APWD, Mayabunder
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹14,628
12 Jun 2026
12 Jun 2026
15 Jun 2026
12 Jun 2026
15 Jun 2026
12 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equalavent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping aluminium screws (Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Sheet to be supplied departmentally) | 540 | sqm | 196 | ₹1,05,840 | 1 |
| 2 | Providing and fixing 60 cm wide Aluminium plain sheet ridges / valley with necessary screws & washer etc. as per the direction of Engineer-in-charge. | 21 | Mtr | 753 | ₹15,813 | 2 |
| 3 | Extra for providing and fixing wind ties of 40x 6 mm flat aluminium section with necessary screws etc. | 84 | Mtr | 656 | ₹55,104 | 3 |
| 4 | Providing and laying hollow block cement concrete block walling 200mm thick consisting of hollow block of size 400mm x 200mm x 200mm of mix 1:3:6 (1 cement; 3 coarse sand; 6 graded stone aggregate 10mm nominal size) having a crushing strength of 3.5 N/Sqm at 28 days as per IS:2185 (Part-I) 1979 laid in cement mortar 1:6 (1 cement; 6 coarse sand) upto floor five level. | 10.5 | cum | 11,039 | ₹1,15,909.5 | 4 |
| 512 mm cement plaster of mix: | ||||||
| 5.01 | 1:4(1 cement: 4 fine sand) | 152 | sqm | 469 | ₹71,288 | 6 |
| 6Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | ||||||
| 6.01 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | 16.2 | cum | 2,248 | ₹36,417.6 | 8 |
| 7Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | ||||||
| 7.01 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 10.2 | cum | 13,524 | ₹1,37,944.8 | 10 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 10.68 MB
BOQ_24734.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
