SPECIAL REPAIR TO ROADS FROM SHAURYA STHAL TO STADIUM ENTRANCE GATE AND EME ZONE AT KALIMPONG MIL STN UNDER GE 867 EWS

M&L for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (VG-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (VG-30) @9.8 kg per 10 sqm blinded with 0.09 Cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed.

M&L for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 Pack (VG-10) @ 5kg per 10 sqm, complete all as specified and directed.

M&L for premix bituminous macadam using paving bitumen of grade 30 Pack (VG-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed.

M&L for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 Cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 Pack (VG-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed.

M&L for liquid seal coat by applying paving bitumen of grade 30 (VG-30) @ 9.8 kg per 10 Sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 Sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions and all as specified and directed.

M&L for applying thermoplastic road marking paint of approved colour upto 10cm width in edges of road with 2.75mm or more thickness, applied using mechanically propelled vehicle consisting heated hopper mounted on a pram, which feeds hot molten thermoplastic under gravity to a rectangular screed with a gate at the base whose opening is set to produce the thickness, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, all as specified and directed.

M&L for 100mm thick plain cement concrete(1:3:6), type C-2 (40 mm graded stone aggregate) as in sub-base, floor, plinth protection, hard standing, paving etc., complete all as specified and directed.

M&L for sand filling under floors or in foundations or sand cushioning including spreading, levelling, watering and consolidation, complete all as specified and directed.