Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC FLAT NO 2 AMEYA APARTMENT SHIV COLONY NEAR PANDAV NAGARI INDIRA NAGAR NASHIK 422009 | NASHIK | NASHIK | MAHARASHTRA | 422009 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹35.5 L+₹59,930 (1.72%)Rejected-Finance 10 SANJAY HSG SOCIETY RACCA COLONY SHARANPUR ROAD NASHIK 422 002 | NASHIK | MAHARASHTRA | 422002 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹37.9 L+₹2.9 L (8.42%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹42.6 L+₹7.6 L (21.9%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹42.7 L+₹7.7 L (22.2%)Rejected-Finance ALPHA HOUSE PLOT NO 29 AGP P10 ASHWIN SECTOR NEW CIDCO NASIK 422 009 | NASHIK | MAHARASHTRA | 422009 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹55 L
EMD Value
₹1.1 L
Closing Date
30 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2022_MES_520194_1
83598/E8
Open Tender
Civil Works
Item Rate
180 days
NASIK
AS PER NIT
8 documents required · 8 mandatory
₹1,000
Yes
GE NASIK RAOD CAMP
₹1.1 L
Yes
15 Jun 2022
26 Apr 2022
1 Jun 2022
26 Apr 2022
30 May 2022
18 May 2022
27 Apr 2022 - 4 May 2022
60 days
Amount
Taking up or down tubes galvanized iron and connections & removing/ shifting to site/store incl cleaning for relaying/refixing height up to four storey complete all as specified and directed by Engineer-in-charge.
25mm or 32mm dia
20 mm dia
15 mm dia
Re-fixing only tubes galvanized iron as directed incl renewal of threading/tread cutting at ends of GI pipes fixed to walls or laid in floor and jointing including S&F new fitting such as socket, bends, elbows, union etc all as specified and directed . Note :-(i). Serviceable GI pipes taken down in item No 01 shall be reused. (ii). The rates quoted are inclusive of all new fittings required and cutting threading to existing pipe
25mm or 32mm dia
20 mm dia
15 mm dia
S&F for tubes medium grade galvanized with all fitting fixed to walls, ceiling and laid in floor of including cutting, holes in concrete/brick wall/roof and making good if required height up to four storey bldgs all as specifed and directed by Engineer-in-charge of sizes :-
25 mm dia
20 mm dia
15 mm dia
S&F 25mm Gun metal globe or gate valve cost copper alloy with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed by Engineer-in-charge.
S&F in repairs bib taps cast copper alloy , Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
S & F chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engr-In-Charge.
S&F ready made PVC conection 15 mm bore 450 mm long with end brass nuts, screws and PVC washer complete all as specified and directed.
S & F 15 mm dia Stop valves fancy type,chromium plated screwed down,high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.
S & F in repairs wash hand basins,Vitreous china (flat back or angle back type) any size,inclunding cutting for and pinning in ends of brackets or erecting stand , including supply & fixing wastecoupling and pipe.
S & F 15 mm dia Pillar taps,cast copper alloy fancy type with capstan heads,chromium plated,screwed down high pressure,with or without lettered Hot or Cold with long screwed shanks and fly nuts,screwed for iron pipe and fixed.
S&F in repairs vitreous china squatting patern "Orisa pattern" size 580mm x 440mm with trap white with intergral foot rest complete all as specifed and directed by Engineer -in-charge.
S&F in repairs coloured PVC valve less, syphonic action fushing cistern , low level, 10 ltr capacity with inlet, ball valve,, float, chain and pull and brackets complete all as specified and directed
S&F in repairs Stainless steel sink made out of 1.0 mm thick sheet for kitchen including waste pipe CI cantilever brackets and waste coupling etc complete and making good to the side of wall,connecting union to pipe, including bedding in CM to dwarf wall. Overall size 495mm x 420mm and bowl size 410 x 330 x 160mm
M & L in repairs for PVC (SWR) floor trap, plain with grating including demolition of old trap and jointing with solvent cement of outlet 75/100 mm dia proper joint of out let connection complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).
Taking down existing PVC/AC rain water , waste and vent pipe of any bore complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).
S&F PVC (SWR) pipes 110 mm dia. double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).
S&F PVC (SWR) bends 110 mm dia any radius
S&F PVC (SWR) 110 mm dia vent cowl
S&F PVC (SWR) junction single (single T) equal or unequal 110 mm bore.
S&F PVC (SWR) bends with access door 110 mm dia any radius
S&F PVC (SWR) pipes 75 mm dia. double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey (4th).
S&F PVC (SWR) bends 75 mm dia any radius
S&F PVC (SWR) 75 mm dia vent cowl
S&F PVC (SWR) junction single (single T) equal or unequal 75 mm bore.
S&F PVC (SWR) bends with access door 75 mm dia any radius
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
M&L Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6.
M&L rendering 15mm thick in cement mortar 1:4 as backing coat on fair surfaces of brick wall.
M&L Non Skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L Non Skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L glazed cermic tiles coloured size 300x200x6 to 7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match
M&L for special treatment to sunken portion with 10mm thick plaster in cement mortar 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy like is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooding for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement. 32mm dia and 500mm long GI Spout light grade shall be provided in all sunken slabs to drain off water. including demolition of cement concrete in sunken slab and filling of mass concrete 1:5:10 all as specified and directed by Engr-In-Charge.
Dismantling stone slabs and tiles of any thickness in floors, aprons etc. laid bedded and pointed in any mortar
S&F Machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed by Engr-In-Charge.
M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick. all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)
Demolition of cement concrete in ground floors and pavings not exc.15 cms thickness (below or above GL.)
M&L for cement concrete type D-2, 1:4:8 (40 mm graded agg) in foundation, filling and mass cocrete and sub base etc.
Disconnecting existing tanks, exc 250 & n exc 500 setting aside (or lowering if required) cleaning and removing all scale and dirt etc, pipes etc and hoisting if required reconnrecting and re-fixing in position.
Disconnecting existing tanks, exc 500 & n exc 1000 setting aside (or lowering if required) cleaning and removing all scale and dirt etc, pipes etc and hoisting if required reconnrecting and re-fixing in position.
Dismantling water tanks and removing to store of capacity 1000 litres
Dismantling water tanks and removing to store of capacity 500 litres
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed
Dismantling of steel window/ventilators any description and any size complete all as specified and directed.
m & L for steel window in Ahmadbad section with double shutters, side hung including box type hinges with steel handles steel peg stay and complete with glazing bars (one side glazed shutter and other side fly proof shutter with and 15x3 mm flat iron fillet around and centre for fly proof shutter including preparation of newly surface , applying two coat of synthetic enamel paint over coat of prime confirming to IS steel window and section complete all as specified and directed by Engineer -in-Charge. Note :- glazing and wire gauging shall be measured and paid separately.
S&F solid PVC frame of size 50 x 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS suare tube , with necessary arrangement for fixing of glass for louer type window / ventilator and additional PVC beading around the frame for fixing of wire mesh supplying and fixing in opening all as specified & directed (note :- Glazing / wiremesh shall be measure & paid separately).
S & F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
Resecuring without taking down of chowkhats or shutter steel or wooden window area not exceeding1.5 Sqm each including necessary repairs to hinges, welding and nut/bolts etc all as specified and directed. Note: Building height up to four storey bldgs
Dismantling boarding, cup board self/ shutter any description, fixed in any position with nails/screw etc complete all as specified and directed.
M&L for 25mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including 4mm thick teak wood beading on all edges as in kitchen cabinet, cup board self, book self pelmet box etc complete all as specified and directed.
S&F 75mm size butt hinges stainless steel
S&F100mm aluminium anodisd, barrel tower bolts of excturded section.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beading where is required in squares n.exc. 0.5 Sqm in each pane. Height upto four storey buildings.
Ditto as in Item above but figured glass,pin headed type
Demolition of brick work/stone work built in any cement mortar including coping.
M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,built in cement mortar 1:6.
Taking down cement or cement lime plaster,any description on brick or stone walls,etc including racking out joints,hacking for key,scrubbing down with water,etc.
M&L rendering 15mm thick cement mortar on brick masonry surfaces in CM 1:6 and finishing even and smooth without using extra Cement.
M&L rendering 5mm thick cement mortar on Ceiling surfaces in CM 1:6 and finishing even and smooth without using extra Cement.
M&L applying two coats of cement paint over coat of priming with alkali resistant primer on walls including preparation of new plastered surfaces.
M&L applying two coats of white wash on new surfaces of ceiling
M & L Rendering15mm thk cement mortar on brick masonary surfaces in CM 1:6 and finishing even and smooh without using extra cement incl sagol finish on internel wall plaster surface
M&L Two coat of distemper oil emulsion over coat of preparation of new surfaces.
M&L Two coat of distemper oil emulsion over coat of preparation of old surfaces including complete removal of existing treatment on wall surfaces.
M&L applying two coats of white wash on old surfaces of ceiling
Taking down carefully existing bitumenous membrane/tarfelt treatment any description and cleaning damaged surface where ever required to make surface ready to receive fresh water proofing treatment on roof and flashing and junctions of parapet, kerb, wall etc. and removing rubbish out of defence land.
Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for.
M&Lcement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.
M&L cement concrete type B1 1:2:4 (20 mm graded aggregate) in steps, parapets and copings, kneelers, bases for water tanks, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary formwork.
Preparing existing roof surfaces and applying cement slurry @ 3 kg/Sqm and cement mortar 15 mm thick in cement mortar (1:4) on concrete surfaces all as specified and directed.
Waterproofing on roof including flashing and junctions of parapet, kerb, wall etc. as under:- (a) Applying bituminous primer on cleaned and dried surface @ 0.20 Kg/Sqm. (b) A coat of hot blown type bitumen of grade 85/25, applied hot at the rate of 2.25 kg/sqm. (c) Laying on primed surface by thermo fusion (torch application) 3mm thick APP based polymeric water proofing membrane weighing not less than 3.50kg/sqm and reinforced with polyester non woven fabric (not less than 150 gms/sqm). (d) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15 Kg/Sqm.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down and hanging during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed by Engr-in-Charge
Dismantling unserviceable main switch/DBs with MCBs and wooden board including making good disturbed surface of wall.
Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.
Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.
(a) One light point controlled by one, one way switch
(b) One ceiling /exhaust fan point controlled by one switch and regulator
(c) One 3 pin 5 amp socket out point on the same board with other switches.
(d) One3 pin 5 amps socket out let point on independent board
(e) One bell/buzzer point controlled by one bell push.
All as per same in item above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.
Material and labour for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface conduit not less then 20 mm, width with MS sheet metal sunken switch/Terminal box 1.2 mm thick or ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface wll / floor / roofs etc.complete all as specified and directed. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.
(a) One light point controlled by one, one way switch
(b) One ceiling /exhaust fan point controlled by one switch and regulator
(c) One 3 pin 5 amp socket out point on the same board with other switches.
(d) One3 pin 5 amps socket out let point on independent board
(e) One bell/buzzer point controlled by one bell push.
All as per item above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.
S &F Switch piano flush type single pole one way 5 amps.
S &F Socket outlet 2 in 1, 3 pin, 6A
S &F Switch socket combination 2 in 1, 6A flush type
S &F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal
S &F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body
S &F Buzzer, Ding Dong AC. 230 volts, single pole
S &F Bell push, flush type, 5 amp.
S &F Electronic regulator 100/120 Watt step type
S &F Lamp holder insulated body with back plate for angle holder including 9W LED Lamp all as per specified.
Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S & F in repair decorative gate/garden light made up of high grade unbreakable polycarbonate material suitable for LED lamp upto 20W B22 base including connecting up with twin core twisted flexible copper conductor cable, 10 LED lamp, foundation and housing PVC pipe etc complete all as specified and directed.
S & F in repair 1X18W LED PL-Lamp suited for installation in existing 2G11 lamp holders including connecting up with twin core twisted flexible copper conductor cable, holders with suitable size, internal wiring of fittings , 230V, 50Hz, complete all as specified.
Supply and fix in repair SP&N enclosure with 2 pole and earth metal plug & socket for incorporating 10 A / 20 A SPN / DP MCB complete all as specified and directed.
Supply and fix LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fix round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..
Supply and fix round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..
Supply and fix round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..
S&F in repair 20 Watt LED Tube Light (4 feet) (Double Side Connection) Ultra bright glass with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders or lamp holders as required in site. Complete all as specified and directed.
S & F 15 Watt LED streetlight fitting luminaire made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.
Fabrication,supply & fixing of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 15 w LED security light fitting
Taking down and fixing partly unserviceable LED downlighter/security light fitting (building) of any make and type for necessary repair including ractifing any kind of electronic disorder/Circuit disorder/replacement of LED strip/all other accessories and make it serviceable , complete all specified and directed by Engr-in-Charge. Note: (1) Ladder to be provided by contractor. (2) Spare i.e driver shall be measured seperately.
S & F in repair electronic driver 6/9/12/15 Watt suitable for downlighter/security light fittings new generation energy saving and environmental friendly long life LED downlighter/street light/building security light of any make and type, all as specified and directed by Engr-in-Charge.
Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 20mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit.
Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit.
Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPPING not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 6 sqmm and one run of PVC casing capping shall be measured as one unit.
S & F 4 way TP&N Vertical Loadline DBs in double door suitable for TP/FP MCCB with Range upto 160 A , breaking capacity : 10 kA / 16 kA / 25 kA , Bus Bars, Neutral Links, Blanking Plates without out MCCB, HSN Code - 8537, complete all as specified and directed by Engr-in-Charge,
S&F Sheet metal enclosure factory made for DBs Triple pole and neutral double door 415 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F in repair Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.
Supply and fix for MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps
S&F MCB, single pole and neutral, 240 Volts , 40-63 Amps all as specified and as directed.
S&F MCB, single pole and neutral, 240 Volts , 6-40 Amps all as specified and as directed.
S&F MCB singal pole 240 Volts , 32 to 63 Amps all as specified and as directed.
S&F MCB singal pole 240 Volts , 6 to 32 Amps all as specified and as directed.
S & F in repair MCCB, 63 Amps , 415Volts, 16KA ,4 pole.
S & F in repair MCCB, 100 Amps , 415Volts, 16KA ,4 pole.
Taking down and fixing partly unserviceable surface/recess mounted LED fittings of any make and size for necessary repair including ractifing any kind of electronic disorder/Circuit disorder/replacement of LED strip/all other accessories and make it serviceable , complete all specified and directed by Engr-in-Charge. Note: (1) Ladder to be provided by contractor. (2) Spare i.e driver shall be measured seperately.
S & F in repair electronic driver upto 42W Watt suitable for surface/recess mounted LED fittings of any make and type, all as specified and directed by Engr-in-Charge.
M/S SAMEER SUBHASH PATANI
Vinod Enterprises
SHELDON CONSTRUCTION
Alpha Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .