Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC BUDOOBAGH NOWPORA 0 KHANYAR SRINAGAR JAMMU KASHMIR 190003 | SRINAGAR | JAMMU AND KASHMIR | 190003 | L1 | Accepted-AOC Contract awarded to M/S Top Minds Industries Pvt Limited by the
committee due to L1 | |
| 2 | L2₹32.4 L+₹4.2 L (15.1%)Rejected-Finance HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | L2 | Rejected-Finance REJECT | |
| 3 | L3₹35.4 L+₹7.3 L (25.8%)Rejected-Finance SANAT NAGAR SRINAGAR PIN 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L3 | Rejected-Finance REJECT |
| Sl No | Description | Qty | Unit | national engineering L2 | Top Mind Industries Pvt Limited L1 | M/S BHAT ENGINEERING WORKS L3 |
|---|---|---|---|---|---|---|
| 1.00 | Suplly and installation testing and commissioning of Hot air of Capacity (75,000 Kcal/Hr) standalone air Heater, for space heating of above capacity suitable for indoor operation with heat exchanger diesel/Kerosine fuel filter, burner, blower fan, automatic digital controller, control panel complete with all fittings, visual controls, safety interlocks, over laod relays, timers, fuel tank with all the standrad assessories, complete all as specified and directed by Engineer-in-charge.
Specification of Hot water Air Blower:- (i) Capacity - 75000 Kcal/Hr (ii) Hot Air Temp - 40 Dig centi. (iii) Temp Rise - 80 Deg Centg. (iv) Thermal Efficiency -90% (v) Fuel consumption - 02 to 03 Ltr/Hrs (vi) Electric Supply - 230 volts, 50 Hz. (vii) Temp Control - Automatic/Digital. (viii) Fuel - Diesel/Cerosene (ix) Burner - Rellion/Ecflom (x) Tank - 60 Ltrs including fuel filter and fuel pipe line. (xi) Fan Type- Blower with motor single phase. (xii) Make -Thermal Tech Innovation or equivalent as approved by AGE (I) Nimu. (xiii) Model -KC75. | 8 | Each | 3,50,000 ₹28,00,000 | 2,70,000 ₹21,60,000 Lowest | 4,15,000 ₹33,20,000 |
| 2.00 | Supply, installation, testing and commissioning for Ducting of including Nitrile rubber insulation of GI, sheet with C and SS rectangular/Square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat , Carriage bolt, Gasket and appropriate sealant on longitudinal joints ect complete of size 36 Gauge, complete all as specified and directed by Engineer-in-charge. | 150 | Running Metre | 2,200 ₹3,30,000 | 3,500 ₹5,25,000 | 950 ₹1,42,500 Lowest |
| 3.00 | Ventilation cover form ducting of size 8"X6", complete all as specified and directed by Engineer-in-charge. | 32 | Each | 2,000 ₹64,000 | 1,500 ₹48,000 | 900 ₹28,800 Lowest |
| 4.00 | Point wiring with PVC insulated single core cable of stranded copper conductors of size 4 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall / ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 4 sqmm as earth continuous wire connected to common earth and PVC Board for one 3 pin socket outlet 15 Amps on independent board, complete all as specified and directed by Engineer-in-charge. | 8 | Per Point | 1,000 ₹8,000 | 1,450 ₹11,600 | 700 ₹5,600 Lowest |
| 5.00 | Switch socket combination 2 in 1, 3 pin, 15/16 Amp flush type universal , complete all as specified and directed by Engineer-in-charge. | 8 | Each | 300 ₹2,400 | 250 ₹2,000 Lowest | 600 ₹4,800 |
| 6.00 | PCC 1:4:8, type D2 using 40 mm graded crushed stone aggregate for pole/struts foundation etc, complete all as specified and directed by Engineer-in-charge. | 5.76 | Cubic Metre | 5,000 ₹28,800 | 4,450 ₹25,632 Lowest | 5,100 ₹29,376 |
| 7.00 | Rendering 10 mm thick cement plaster on brick or concrete surfaces in CM 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. | 24 | Square Metre | 100 ₹2,400 Lowest | 1,500 ₹36,000 | 210 ₹5,040 |
| 8.00 | Preparation of new plastered surface of wall and applying two coat of distemper oil emultion over and including one coat of alkaline resistant primer and 3mm thick wall care putty, complete all as specified and directed by Engineer-in-charge. | 24 | Square Metre | 150 ₹3,600 Lowest | 250 ₹6,000 | 160 ₹3,840 |
Tender Value
₹42.7 L
EMD Value
₹85,200
Closing Date
4 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHUMBATHANG
HQ CWE KHUMBATHANG PIN 900270 C/O 56 APO
PROVN OF CHS IN INF BN 14 GRENADIERS IN NIMU MIL STN UNDER AGE (I) NIMU
2025_MES_718765_1
80051/17/2025-26
Open Tender
Civil Works
Item Rate
180 days
NIMU
Class D cat c (i)
8 documents required · 8 mandatory
₹500
AGE (I) NIMU
₹85,200
Yes
11 Aug 2025
5 Jul 2025
5 Aug 2025
5 Jul 2025
4 Aug 2025
22 Jul 2025
5 Jul 2025 - 21 Jul 2025
Amount
Suplly and installation testing and commissioning of Hot air of Capacity (75,000 Kcal/Hr) standalone air Heater, for space heating of above capacity suitable for indoor operation with heat exchanger diesel/Kerosine fuel filter, burner, blower fan, automatic digital controller, control panel complete with all fittings, visual controls, safety interlocks, over laod relays, timers, fuel tank with all the standrad assessories, complete all as specified and directed by Engineer-in-charge. Specification of Hot water Air Blower:- (i) Capacity - 75000 Kcal/Hr (ii) Hot Air Temp - 40 Dig centi. (iii) Temp Rise - 80 Deg Centg. (iv) Thermal Efficiency -90% (v) Fuel consumption - 02 to 03 Ltr/Hrs (vi) Electric Supply - 230 volts, 50 Hz. (vii) Temp Control - Automatic/Digital. (viii) Fuel - Diesel/Cerosene (ix) Burner - Rellion/Ecflom (x) Tank - 60 Ltrs including fuel filter and fuel pipe line. (xi) Fan Type- Blower with motor single phase. (xii) Make -Thermal Tech Innovation or equivalent as approved by AGE (I) Nimu. (xiii) Model -KC75.
Supply, installation, testing and commissioning for Ducting of including Nitrile rubber insulation of GI, sheet with C and SS rectangular/Square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat , Carriage bolt, Gasket and appropriate sealant on longitudinal joints ect complete of size 36 Gauge, complete all as specified and directed by Engineer-in-charge.
Ventilation cover form ducting of size 8"X6", complete all as specified and directed by Engineer-in-charge.
Point wiring with PVC insulated single core cable of stranded copper conductors of size 4 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall / ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 4 sqmm as earth continuous wire connected to common earth and PVC Board for one 3 pin socket outlet 15 Amps on independent board, complete all as specified and directed by Engineer-in-charge.
Switch socket combination 2 in 1, 3 pin, 15/16 Amp flush type universal , complete all as specified and directed by Engineer-in-charge.
PCC 1:4:8, type D2 using 40 mm graded crushed stone aggregate for pole/struts foundation etc, complete all as specified and directed by Engineer-in-charge.
Rendering 10 mm thick cement plaster on brick or concrete surfaces in CM 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.
Preparation of new plastered surface of wall and applying two coat of distemper oil emultion over and including one coat of alkaline resistant primer and 3mm thick wall care putty, complete all as specified and directed by Engineer-in-charge.
national engineering (BID ID -3374428)
M/S BHAT ENGINEERING WORKS (BID ID -3371477)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .