Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹18.4 LAccepted-AOC | L-1 | Accepted-AOC lowest bidder for the work. | |
| 2 | L-2₹19.0 L+₹25,390 (1.36%)Rejected-Finance | L-2 | Rejected-Finance other than the lowest bidder | |
| 3 | L-3₹21.1 L+₹2.4 L (12.7%)Rejected-Finance | L-3 | Rejected-Finance other than the lowest bidder | |
| 4 | L-4₹22.2 L+₹3.5 L (18.5%)Rejected-Finance | L-4 | Rejected-Finance other than the lowest bidder | |
| 5 | L-5₹22.5 L+₹3.8 L (20.1%)Rejected-Finance | L-5 | Rejected-Finance other than the lowest bidder |
Tender Value
₹27.9 L
EMD Value
₹55,800
Closing Date
19 Jun 2023, 6:00 pmClosed
Mr Bharat Singh Laspal, SE, CWE Bhopal
Headquarters, Commander Works Engineer, Bhopal, Military Engineer Services, SI Line, Bhopal, Pin Code - 462001 (Madhya Pradesh)
SPECIAL REPAIR FOR CONVERSION OF GI CHARPOY WITH NYLON NEWAR TO CHARPOY GI PIPE WITH PLY TOP AT NASIRABAD MIL STN UNDER GE NASIRABAD
2023_MES_594733_1
83841/E8
Open Tender
Civil Works
Item Rate
180 days
NASIRABAD
AS PER NIT CONDITION
7 documents required · 7 mandatory
₹500
Yes
GE NASIRABAD
₹55,800
Yes
13 Jul 2023
11 May 2023
21 Jun 2023
11 May 2023
19 Jun 2023
5 Jun 2023
11 May 2023 - 5 Jun 2023
Amount
Dismantling old broken/ unserviceable long rail and S & F 32 mm nominal dia galvanised mild steel tube, medium grade, ISI marked as per IS 1239 (Part-1): 2004 as new long rail for GI charpoy as per FD-220 including threading at both ends and provision of two check nuts of 6 mm thick suitable for 32 mm bore pipe complete all as specified and as directed. (Note: Each long rail shall be measured separately.)
Dismantling old broken/ unserviceable short rail and replacing the same by using the GI pipe obtained under dismantling of long rail by cutting into required size including threading at both ends for GI charpoy as per FD-220 complete all as specified and as directed. (Note: Each short rail shall be measured separately.)
Dismantling old broken/ unserviceable legs and replacing the same by using the GI pipe obtained under dismantling of short rail by cutting into required size including threading at one end for GI charpoy as per FD-220 complete all as specified and as directed. (Note: Each leg shall be measured separately.)
Dismantling old broken/ unserviceable check nuts from GI charpoy fitted with long rail and provide new check nuts of 6 mm thick suitable for 32 mm bore pipe complete all as specified and as directed.
Dismantling old broken/ unserviceable 3 way elbow and provide 3 way elbow suitable for 32 mm bore pipe (weight not less than 415 gms) complete all as specified and as directed.
Modification of existing Charpoy GI (newar) as per FD-220 to hard bed with necessary arrangement & fittings as follows including removal of newar and wooden blocks at bottom of legs complete all as specified and as directed.: - (i) Fixing two Nos stiffeners of 25 mm X 25 mm X 1.6 mm mild steel tube along width long rail dividing length into three parts using welding. (ii) Fixing six Nos mild steel cleats of size 50 mm X 60 mm X 6 mm on both side charpoy along short rails using welding. (iii) Fixing of mild steel plate 32 mm X 32 mm X 5 mm at bottom of legs using welding and fixing of 3 mm thick rubber sheet under mild steel plate using adhesive. (iv) Supply & fixing of 12 mm thick plywood (7 ply), boiling water resistance (BWR) Grade, AA type as per IS 303: 1989 and IS 848: 2006 of size 1980 mm X 900 mm fixed over the MS cleats, mild steel stiffeners with chromium plated screws. (v) Stiffeners and cleats shall be painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. Note: The contractor shall procure the plywood directly from the manufacturer and produce the paid voucher to the Engineer-in-Charge.
F.M. KHAN SONS
Budget Furniture Industries
M/S CHANDER SHEKHAR
HINDUSTAN ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .