Construction of 6 Rooms for upgradation of GHS Thuroo to HSS Thuroo Zone Arnas (Winter) District Reasi

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: 80 %All kinds of soils and 20% ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 4 : 8)1 cement 4 coasre sand 8 stone aggregate grade , with 40mm nominal size . crushed including all carriages lead & lift

Providing and laying Cement Concrete 1:5:10 (1 ce- ment: 5 coarse sand : 10 graded brick aggregate 40 mm nominal size) in retaining wall/return wall, col- umns etc. excluding cost of centering and shuttering , all work upto floor V level including all carriages lead & lift

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 3 : 6 ) with 20% boulders cement 3 coasre sand 6 stone aggregate grade , with 20mm nominal size . crushed including all carriages lead & lift

Providing and laying in position reinforeced cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 1.5 : 3)1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed including all carriages lead & lift

Reinforced cement concrete work in wall (any thickness) including attached pilasters 'buttresses'plinth and string courses'fillet ,column pillar'piers ,abutment 'post and sturts etc upto floor five level excluding the cost of centering and shuttering ,finishing and reinforement ( 1 : 1.5 : 3 )1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed including all carriages lead & lift

Reinforcement of RCC work in plinth band incl straightening, cutting, bending , placing in position and binding incl.all carriages complete. including all carriages lead & lift

Brick work with common burnt clay F.P.S (Non-modular) brick of class designation 75 in foundation and plinth in 1:6 (1 cement : 6 coarse sand) including all carriages lead & lift

Extra for brick work in Super structure above plinth level upto floor V level (By manual means) including all carriages lead & lift

Centering and shittering including strutting propping etc and removal of form work Foundation footing bases of columns etc

Centering and shuttering incl. struting, proping ,etc.and removal of form work for; lintel beam ,plinth beam ,girders,bressumers and cantilevers

Centering and shuttering incl. struting, proping ,etc.and removal of form work for;columns,pillars,piers,abutments,posts and struts

Centering and shuttering incl. struting, proping ,etc.and removal of form work for edges of slab under 20 cm

Centering and shuttering incl. struting, proping ,etc.and removal of form work for suspended floors,roofing ,landings,balconies and access platform

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement 6fine sand ) including all carriages lead & lift

12 mm cement plaster 0n wall of mix 1:6 ( 1 cement 6 fine sand ) including all carriages lead & lift

6mm thick plaster of mix 1:3 including all carriages lead & lift

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and ixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash asteners shall be paid for separately): 2nd Class Deodar wood

Providing and fixing paneled or glazed shutters for doors and windows and clestory windows using 10 kg /sqm (4mm thick) float glass panes including ISI marked black enameled M.S. butt hinges bright finished of requried size with necessary screws, ( 35mm thick of 2nd class deodar wood).

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : Second class deodar wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick

Cement concrete flooring in (1:2:4) 1 cement : 2 coarse sand : 4 stone aggregate finishing with a floating coat of neat cement including cement slurry but exd. The cost of nosing of step etc. complete 50mm thick with 20 mm nominal size stone aggregates (crushed) including all carriages lead & lift

Providing fixing and glass strips in joints ot terrazo/cement concrete floor 40 mmwide x 4mm thick

Steel work welded in built up section, trusses and framed works including cutting , hoising, fixing in position and applying a priming coat of approved steel primer incl all carriages complete including all carriages lead & lift

Providing corrugated G.S. sheet roofingincluding vertical/curved surface fixed with polymer coated J or L hooks bolts, nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlaping of steels complete ( upto a pitchin horizontal/vertical or curved surface) excluding the cost of purlin ,rafters and trusses and including cutting to size and shape where ever requried 0.63 thick with zinc coating not less than275gm /sqm including all carriages lead & lift

Providing ridges of hips of width 60 cm 0verall width plain GS Sheet fixed with polymer coated J or L hooks bolts, nuts 8 mm diameter with bitumen and G.I limpet washers complete 0.63 thick with zinc coating not less than275gm /sqm including all carriages lead & lift

Providing and fixing hard board celing sheet of approved quality with neccesary nails etc. complete 4.5 mm thick including wooden corner moulding of triangle shape. as per requriment ( frame work paid separately including all carriages lead & lift

Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position second class kail wood including all carriages lead & lift

Applying priming coat with ready mixed pink or grey primer including acrylic putty of approved brand and manufactures on wood work (hard and soft wood)

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacturers in all shades (two or more coats) on new work

Providing and fixing plained eaves boarding 2nd class kail wood 250 x 32 mm

White washing with lime to give an even shade with two or more coats on new work

Finishing walls with water proofing cement paint of requried shade New work(one or more coat )applied @3.84 kg / 10sqm including cement primer coat completed

Making plinth protection 50mm thick with cement concrete ( 1 : 3 : 6) 1 cement : 3 Coarse sand: 6 stone aggregate) 20 mm nominal size f stone aggregate over 75 mm bed of dry brick ballast , 40 mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth. including all carriages lead & lift

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer - incharge.

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 X 10 MM

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 200 X 10 MM

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 mm

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 125 mm

Steel work welded in built up section /framed work including cutting ,hosing ,fixing in postion and applying a priming coat of approved coat of approved steel primer using structural steel etc in grating ,frames, guard bar,ladder,railing,bracket, gAtes and similar works including all carriages lead & lift

Farman Ali Contractor

Rayaiz Ahmed