SITC OF AIR CONDITIONING SYSTEMS AT TIFR,MUMBAI

Amount

Items to be supply and installation

SITC of Caryair/Systemair/Air-o-Mec Engineers make Double Skin Standard type Horizontal floor mounting Air Handling Unit constructed from 22G plain GI sheet as inner skin & outer skin shall be 22 G GI Powder coated sheet with 25mm thick injected PFU with 45 kg/cubm. density insulation in-between and the frame work shall be constructed of extruded Aluminum hollow section with thermal break and filled with reformed insulation section. Unit shall complete with a) Fan section with forward curved fan made of ‘KRUGER’, suitable capacity energy efficient Motor, taper lock pulley & flat belt b) Coil section with CU coil of 5/8" size 22 G thickness & AL Fins of 32G Thickness c) Filter section with flat type air filters with 3 ply pleaded HDPE washable filters with AL casing of 50mm thick d) Suitable depth PVC moisture eliminator kept in between coil and motor to arrest condensate spray. Motor shall have terminal box at the top for the ease of electrical connections. All AHU nut, bolt and washer should make of anti-corrosive material. The AHU shall be suitable for the following duty as per tender’s technical specifications enclosed Capacity :- 11000CMH (6500CFM), 50mm static, 13 sqft area,8 rows deep coil (2 Nos., 4 rows each cooling coil in tandem on common drain tray with maintenance space in-between)

Modification of chilled water piping connections of cooling coil of AHU with SITC of 50mm size , Tata/Jindal/Zenith make G.I.. `C` class , e.r.w., and reusing the existing ‘Siemens’ make 3-way valve & valves. The Installation of new pipe shall be complete with 50mm thick, High density (24 Kg/CubM), TF quality thermocole insulation wrapped with Polythene vapour barrier, chicken wire mesh, and finished with two layer of 12mm thick each sand & cement plaster, painted with two coats of grass green enamel paint with supply & return indicator painted with white paint. All the nuts, bolts & washer, used for piping & valve connection and piping & AHU connection shall be made of anti-corrosive material. All the piping support should be hot dipped galvanized.

Design, fabrication, supply, installation, testing and commissioning of GSS ducting of suitable gauge as per IS655 with canvass connections connecting AHU with main duct with all the accessories like turning vanes, elbows, flange, Hot dipped Galvanized Structural steel supports, gaskets, non-corrosive nuts and bolts & hardware etc. , (Existing duct heater to be reinstalled with new supporting structure & accessories) complete in all respects to the entire satisfaction of the department as per technical specifications in totality. Nothing extra shall be payable on any account.

S&I of Heavy duty Damper made out of 16G GI sheet with all the moving parts supported on Brass bush made of GI sheet (Flappers) & hot dipped galvanized structural steel (levers) on the outlets of the AHUs

S&I of H Guru/Fiebig make 4” dial type pressure gauge of range 0-7 kg/sq.cm with all the accessories

S&I of H Guru/Fiebig make 4” dial type Temperature gauge of suitable range for chilled water application with all the accessories

Supply, fixing, testing & commissioning ‘Leader’ make 15mm Air Release Valve including S.S ball valve, barrel nipple etc to connect to the GI chilled water pipe line complete as required.

Supply, fixing, testing & commissioning ‘Leader’ make 15mm drain Valve including S.S ball valve, barrel nipple etc to connect to the GI chilled water pipe line complete as required.

Supply, fixing, testing & commissioning ‘Audco’ make 50mm PN16 rating butterfly valve in place of gate valve at AHU header with all the accessories i.e. cutting, welding, distance piece, insulation, etc. complete as required

- Buy Back Items

Buy-Back (ie minus) Amount of existing Double Skin AHU of FTNMR area with associated Piping and GI Ducting , etc on “As is where is basis” i.e. includes dismantling, lifting & shifting, etc. of AHU.

Iceberg HVAC Pvt Ltd