Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹35.1 LAccepted-AOC H NO 787 22 JHANG COLONY ROHTAK 124001 | ROHTAK | HARYANA | 124001 | 1 | Accepted-AOC 1 | |
| 2 | 2₹31.3 L+₹1.5 L (5.07%)Rejected-AOC | 2 | Rejected-AOC 2 | |
| 3 | 3₹33.0 L+₹3.2 L (10.9%)Rejected-AOC | 3 | Rejected-AOC 3 | |
| 4 | 4₹33.4 L+₹3.7 L (12.3%)Rejected-AOC H NO 959 SECTOR 3 ROHTAK | 4 | Rejected-AOC 4 | |
| 5 | 5₹33.9 L+₹4.1 L (13.8%)Rejected-AOC 1200 HOUSING BOARD COLONY SEC 15 HISAR | HISAR | HISAR | HARYANA | 5 | Rejected-AOC 5 |
Tender Value
₹37.7 L
EMD Value
₹75,380
Closing Date
12 Oct 2023, 3:00 pmClosed
JAGDISH SINGH DAHIYA
ENGG. CELL, MDU, ROHTAK
Providing and Fixing of Street Light Poles and LED Fittings on different roads i.e In front of Vivekananda Library, New Bio Science building, University Secretariat building, Press building and Physical Education building in MDU, Rohtak.
2023_HRY_314785_1
20233B3E4813 5A44 4944 9C09 0A302C6FAE50817MDU
Open Tender
Electrical Works
Works
90 days
Rohtak
Providing and Fixing of Street Light Poles and LED Fittings on different roads i.e In front of Vivekananda Library, New Bio Science building, University Secretariat building, Press building and Physical Education building in MDU, Rohtak.
2 documents required · 2 mandatory
₹5,000
Yes
₹75,380
Yes
26 Feb 2024
25 Sept 2023
13 Oct 2023
25 Sept 2023
12 Oct 2023
25 Sept 2023
Amount
[23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA
[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole
[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required.
[24.1.6]EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.
[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.
[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.
[24.10.2]CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 2. Earth work in excavation in foundations, trenches etc. in all kind of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, staking the excavated soil clear from the edge of excavation and subsequent filling around masonry, in 15cm layers with compaction, including disposal of all surplus soil, as directed with in a lead of 30 metres.
[24.10.6]CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 6. Digging of pucca road in required width for laying of cable / pipe complete in all respect up to the entire satisfaction of Engineer-in charge
[24.2.4.2]LT CABLE 4.2. Laying of underground cable in pipe /existing open/closed trench etc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core
[24.2.7.3]LT CABLE 7.3. Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core
[24.2.8.5]LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm
[24.2.8.6]LT CABLE 8.6. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm
[24.4.2.4]STREET LIGHT 2.4. Supply and erection of GI bracket made of 32 mm dia medium class GI pipe, having 15 deg angle from horizontal, suitable for fixing on top of Street Light pole 150 cm long, with 30 cm high suitable size pole cap.
[24.4.4.3]STREET LIGHT 4.3. Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) At Pole above 7 metres but up to the height of 9 metres.
[24.4.8.7]STREET LIGHT 8.7. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 9 Metre Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm.
[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia
Providing and laying 100 mm dia 6 Kg pressure for road crossing for laying PVC Pipe by manual holing as per entire satisfaction of engineer in charge
Supply of 35 Sqmm 4 Core aluminium armoured XLPE LT cable, complete in all respect upto the entire satisfaction of Engineer-in- charge. (Make : Havells, Polycab ).
Supply and erection of gI double bracket made of 32 mm dia medium class GI Pipe, having 15 DEg angle from horizontal, suitable for fixing on top of street light pole complete in all respect upto the entire satisfaction of engineer in charge.
Supply and erection of 2.5 sq mm 3 core PVC flexible copper cable in existing 9 meter G I poles complete in all respect up to the entire satisfaction of Engineer in charge. Make: Havells/Polycab/Anchor
Supply and erection of 70 Watt LED street light fittings on pole as per entire satisfaction of the Engineer In charge with following specifications: LED street light of system wattage 70 Watt IP 66 multiple LED with lens optics with electric driver and pressure di-cast aluminium housing for effective thermal management. Total system lumen 70 W LED should be 8000 Lumen or above in cool day light (5700-6500K), Lumen efficiency )115LM/W, Power factor )0.95, CRI (70, average life )5000 hours open /short circuit protection, over voltage protection, surge protection with SPD (10KV). Complete mounting brackets and accessories as required with connections with two year warranty and Complete in all respect up to the entire satisfaction of Engineer-in- charge. Make: Phillips, Havels, Bajaj,Wipro
supply of 25 sqmm 1 core aluminium unarmoured LT cable Make- Havells/polycab
JIND INFOTECH JIND
HOLIFAX FACILITIES MANAGEMENT PRIVATE LIMITED
DEVENDER KUMAR CONTRACTOR
Mandeep Singh
Balraj Singh Contractor
Chahal Enterprise Rohtak
The Darba Kalan Shila Coop L/C Society Ltd.
THE ROHINI COOP L&C SOCIETY LTD.
The Swachh Haryana Co op L/c multipurpose Society ltd
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .