Repair/renovation of BDC office at Deskit

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil.

Dry random rubble masonry with hard stone in foundation andplinth:.

Random Rubble masonry with hard stone from nallah infoundation and plinth including levelling up with cement concrete1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate20mm nominal size) at plinth level withcement mortar 1:6 (1 Cement: 6 coarse sand).

Providing and laying stone soling in horizontal level including the cost of stone.

Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars,piers, abutmen"ts, posts ans sturts, etc. upto floofive level excluding cost of centring, shuttering,fmishing and reinforcement.1:2:4 (1 cement: 2 coarse sand: 4 gradedcrushed stone aggregate 20mm nominalsize)

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete. TMT bars.

Centnng and shuttering including strutting~ propping etcand removal of form work for.-Columns, piers, abutments, pillars, posts and struts.

Centring and shuttermg including strutting, propping etc.and removal of form for·Suspended floors, roofs, landings, balconiesand access platform.

Providing and fixing 12mmthick ply 4 inches width planks board, placing with toung and groove geometrical design including french sprit polishing complate job

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed andfixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dashfasteners shall be paidforseparately): Second class kail wood

providing and fixing 12mm thick ply wood for penalling complate job

Providing and fixing 6mm thick ply wood for ceilling complate job

Providing and laying damp-proof course 5Crnm thick withcement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4graded stone aggregate 20mm nominal size iNallah.

providing and fixing wooden laminated flooring board 8mm thick action Tesa AC 3, complete job.

Providing and fixing stainless steel (Grade 304) railingmade of Hollow tubes channels, plates etc.includingwelding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessarystainless steel nuts and boltscomplete,i/c fixing therailing with necessary accessories and stainless steeldashfasteners, stainless steel bolts etc. of required sizon the top of the floor or the side of waist slab with suitablearrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.

Painting with synthetic enamel paint of approved brandand manufacture to give an even shade. Two or more coats on new work.

Providing and fixing upto floor five level precast cementconcrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete crush

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standardtubular sections/appropriate Z. sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, attop, bottom and sides with required EPDM rubber Ineoprene .. gasket felt etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing I panelling, C.P.brass I stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paidfor separately.)

Providing and fixing 12mm thick prelaminated particleboardflat pressed three layer or graded wood particleboard (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partitionframes with C. P. brass I stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorativelamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubberI neoprene gasket etc. complete as per the architecturaldrawings and the directions of engineer-in-charge. (Costof aluminium snap beading shall be paid in basic item.)

Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering- All work upto plinth level.1:2:4 (1 cement: 2 coarse sand : 4 gradedstone aggregate 20mm nominal size) nallah

Providing and fixing panelled or panelled and glazedshutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excludingpanelling which will be paid for separately,al! completeas per direction of engineer- in charge. Second kail wood

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished welded type tubes

Finishing walls with water proofing cement paint ofrequired shade.

Providing and fixing Ceramic gla.z:ed floor tiles 300x300mm (thickness to be specified by the manufacturers) of1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour suchas White, Ivory, Grey, Fume Red, Brown laid on 20 mmthick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rsesand) including pointing the joints with white cement andmatching pigment etc., complete.

W.C. pan with lSI marked black solid plastic seat and lid, with white vitreous china flushingcistern & C.P. flush bend.

Providing and fixing soil, waste and vent pipes PVC 100 mm

Providing and fixing soil, waste and vent pipes PVC 75 mm

Providing and fixing bend of required degree with access door , insertion rubber washer 3 mm thick , bolts and nuts complete 100 mm

Providing and fixing double equal plain junction of required degree 100 mm

Providing and fixing double equal plain junction of required degree 75 mm

Carriage of stone by MT 15 KM

Carriage of sand and aggregate by MT 12 KM

Carriage of cement by MT 118 KM

M/S KUNZANG ISHI GOVT CONTRACTOR

GHULAM HUSSAIN