Design, fabrication, supply, installation, testing and commissioning of Cubicle type Panel for canteen kitchen at T.I.F.R., Colaba, Mumbai 05

Amount

Fabrication, testing and supply of Cubicle type floor mounted, switch board fabricated from MS sheet (CRCA) suitable for 415 V, 3 Phase, 4 Wire, 50 Hz A.C. supply, complete with earthing to frame switches (MCCB), switch (MCCB) doors, cable Alley etc. & provided with (please refer drawing No. TFR/TSR/2607/RO and TFR/TSR/2608/RO as per enclosed Technical Specifications):

Installation, Testing and comm issioning of above switch board (Item No. 1) site specified by Electrical Engineer. (All incidental civil work including raising foundation as per the requirement) for installation, termination of earthing strip and other related work shall be included in Vendor’s Scope).

Dismantling of existing Switch

Supply of 1.1kV grade, 4 Core, XLPE insulated, and overall sheathed, stranded copper conductor, flat steel strip/wire armored cables conforming to IS:7098/ part-I (with latest amendments) and for following size. The cable shall bear ISI certification mark.

4 Core x 25 Sq.mm

4 Core x 25 Sq.mm

Laying of 4 core, 1.1kV grade XLPE cables, armored copper conductor cables in existing ground, trench and cable tray

4 Core x 25 Sq.mm

4 Core x 16 Sq.mm

Laying of the cable on the wall with clamping or saddles.

4 Core x 25 Sq.mm

4 Core x 16 Sq.mm

End terminations of LT cables: Providing end terminations for 4 core, 1.1 kV grade XLPE insulated armoured, Copper conductor cables including supply of cable gland, lugs, neoprene bushes and other materials and tolls required complete with terminal connections, earthing of glands and as required and as directed by Engineer- in-charge.

4 Core x 25 Sq.mm

4 Core x 16 Sq.mm

Providing labor, material, Equipment’s for structural steel work at all level including supplying cutting, fabricating welding, erecting and fixing in position for concrete trenches including painting with primer of approved steel primer also includes cutting edge concrete grounding MS angle fastening.

Structural steel work at all levels in M S plain and chequered plates including, supplying, cutting, fabricating, Welding, erecting and fixing in position including painting with a primer coat of approved steel primer. Notes: Welding weights connection bolts, and nut shall not be measured for the payment but the cost of which shall be deemed to have been included in the rate.

Supplying & fixing of 2 mm thick GI Perforated type cable Trays of Asian/Profab Engineers make The cable tray shall be fixed to the ceiling/ wall with MS angle support with 35mmx2mm thick GI slotted 'C' channel Patti at an interval of 1 meter/or the MS angle iron fabricated support depending upon the location. The rate shall include the cost of supports. Cable Tray=150 mm wide x 50 mm height

ANAMIKA ENTERPRISES

OM POWER SYSTEMS

Kalpaka Power Control