8997 SPECIAL REPAIR OF OFFICE SPACE AND WORK STATION AT EAST WING IST FLOOR FMU BUILDING AT NAVAL DOCKYARD PROVISION OF SECURITY POST OVER BUILDING NO P 180 AT SBW JETTYY AT NAVAL DOCKYARD AND ADDITION ALTERATION AND RENOVATION OF OFFICERS WASH ROOM

Amount

Taking down cement plaster on brick / surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

All as per item No 5 above but 20 mm bore GI Pipe complete all as specified and as directed.

Demolition of Unreinforced cement concrete of any description and in any position not other wise specifically provided for all as specifed and directed.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc complete all as specified and as directed.

M & L for Pre cast Cement concrete block masonary (type B1 1:2:4 20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM (1:6) complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks (old Size) straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed..

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

S&F 4.8mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and as directed

S & F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed.

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed..

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and as directed.

S&F Extrude aluminium anodised alloy handles, fabricated type 200mm size complete all as specified and as directed.

M & L for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Demolition of cement concrete in sunken floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M&L for PCC of type D2, 1:4:8 using (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed.

Material & labour for water proofing plaster for sunken portion in CM 1:3, 15 mm thick in two coats with integral water proofing compound at the rate of 3 % by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and as directed .

Material & labour for water proofing treatment of sunken floor/wall surfaces by applying two coats of elastomeric coatings of BRUSHBOND RSX in FOSROC or TECKFORCE 2K STRONG in CHOWKSEY CHEMICALS or equivalent as a two component flexible elastomeric coating with minimum 2mm thickness layer complete all as per manufacture's instructions and as directed.

M & L for Non skid joint free coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.

M&L Cement concrete 25 mm thickType B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

All as per item No 27 above but 20mm dia medium GI pipe complete all as specified and as directed

S & F in repair single piece WC with UF Soft close slim seat cover fixing accessories, accessories set and cistern fitting incl trap/connecting piece complete all as specified and directed.

S&F for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and as directed .

S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs complete all as specified and directed.

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and directed.

S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs complete all as specified and directed. .

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvent cement complete all as specified and directed.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer complete all as specified and directed.

S&Fof vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified Fixed in repairs complete all as specified and directed. .

S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S.frame shall be covered with heat moulded design with colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed .

S&F in repair powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partion/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc complete all as specified and directed.

Removing bldg material exc. 1.50 km but n exc. 5 km and depositing complete all as specified and directed.

M & L for Particle board 18/19 mm thick, medium density, flat pressed, single layer type or three layer type, BWR grade. complete all as specified and directed .

M & L Sheet glass 4.8 mm thk, ordinary quality and glazing with oil putty with screws/ rebates in square exc 0.5 sq.m in each pane complete all as specified and directed .

S/F of Stainless steel butt hinges 75 mm long wih screw complete all as specified and directed .

S/F of Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screwsof size 100 mm complete all as specified and directed ..

S/F of 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished complete all as specified and directed .

Preparating of new wooden surface of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S & F Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and directed .

S&F aluminium window, doors with shutters / frames / partitions made out of extruded powder coasted aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg syays and handles including connected items, with and including, making good to the disturbed portion with its original specification, complete all as specified and directed.

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and directed.

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and as directed

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and directed.

S&F of Acrylic unit name board having Unit Name and departmental logos engraving on Sheet complete all as specified and directed.

S&F stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm fixed in repair complete all as specified and directed.

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

S&F 150mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

S & F extruded Brass handles fabricated type 150 mm size complete all as specified and as directed .

S&F 8 to 12mm thick, toughened glass for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs (1200 mm long), door lock on both shutters etc fittings for door pivots etc complete all as specified and directed .

M & L for reinforced cement concrete M-30 (20mm graded aggregate) as in walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top footings, including attached pilasters and buttresses above upto 6mtr height of building all as specified and as directed .

M & L for reinforced cement concrete M-30 (20mm graded aggregate) as in slab supported in walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like upto 6 mtr height of building incl necessary shuttering all as specified and as directed b.

M & L for reinforced cement concrete M-30 (20mm graded aggregate) as in beams, cantilevers, bressumers, lintels over 1.5m spn upto 6 mtr height of building complete all as specified and directed.

M&L for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0 complete all as specified and directed.

All as per item No. 73 above but as in stirrups complete all as specified and directed.

M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emulsion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.

M&L for Stainless steel decorative railings (grade 316), staircase (design and pattern as approved made out of SS pipes, SS flats, SS plates etc. Complete with and including necessary welding , buffing/polishing and fixing complete all as specified and directed.

M&L for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications.

M&L complete removal of existing plastered wall surfaces, over 10cm girth, preparation of surfaces, applying two coats of 100% acrylic, weather resistant emulsion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope with 3% water proofing compound in weight of cement complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid separately).

S & F Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, plates, etc complete all as specified and directed.

S & F MS anchor fastener 250mm long as per sample kept in GE (NW) Kunjali and necessary drilling arrangement complete all as specified and directed.

S & F fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc with L type or J type or cranked hook bolts in lieu of screw complete all as specified and directed

S & F factory made single extruded WPC (wood polymer composite) solid door/window/ windows & other frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 750 Kg/Cum and screw withdrawl strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/Sqcm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ss dash fasteners of required dia and length complete as per direction .

S & F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawl strength of 1800 N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, including 3 Nos 100mm stainless steel hinges, 2 Nos 200mm long stainless steel tower bolt and one Nos 300mm long 16mm dia sliding bolt all complete all as specified and directed.

Formwork to face of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters,buttresses, etc.vertical or to batter sides and also splays between floors and beams, etc. rough finished surface of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams,beam haunchings, griders, bressummers,lintels,cantilevers,shelves including sup-ports, overhangs,etc.also splays between floors and beam etc complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conform to IS 1161-1979 grade st-240 complete all as specified and directed..

M&L for 1.25 mm thick galvanized, mild steel sheet as in roof covering fixed with rivets or other suitable arrangements over MS brackets Trapezoidal/oval shape /round shape of required profile with desired slope etc complete (Sample kept at GE (NW) Kunjali) complete all as specified and as directed.

M&L in repair point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly all as specified . (a) One light point controlled by one 5A switch

All as per item No.91 but for One Fan point controlled by one 5A switch complete all as specified and as directed.

All as per item No.91 but for One 5A flush type switch socket point on same board board complete all as specified and as directed.

All as per item No.91 but for One 5A flush type switch socket point on independent board complete all as specified and as directed.

M&L in repair for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

S & F in repairs modular switch 1 way 6A, 1 module all as specified and directed.

S & F in repairs modular switch 1 way 16A, 1 module all as specified and directed.

S & F in repairs modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed.

S & F in repairs modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed.

S&F for modular fan step regulator, 120W - 2 modular all assspecified and directed.

S & F Ceiling fan 5 Star Rated 1200 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by complete all as specified and directed.

S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA (Make Legrand cat No 408595 or equivalent make from list of manufactures) including making connection complete all as specified and directed.

S & F in replacement of MCB 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA (Make Legrand cat No 408596 or equivalent make from list of manufactures) including making connection complete all as specified and directed.

S & F in replacement of MCB 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA (Make Legrand cat No 408518 or equivalent make from list of manufactures) including making connection complete all as directed.

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. (Make -Legrand cat No 507610 or equivalent make from list of manufactures) (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting TPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507720 or equivalent make from list of manufactures) (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F MCCB, 415 volts, four pole of cap 200 Amps, 25 KA, DPX3 with fixed Thermal - setting and electronic earth leakage module of suitable size and making connections complete all as directed. Make - Legrand cat No 4202 18 or equivalent in list of manufactures

Material and labour in repair for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit with and including 4.00 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and directed.

S &F in repair Ceiling light 36 WATT-2ft X 2 ft Recess mounting led ultra slimceiling light with extruded aluminium housing and milky diffuser.LED ultra slim panel:CYGNUS SERIES. Make- C&S CAT PART NO-LTCRSLM36WATT2X2 or equivalent make in list of manufactures

Supply, install, Test and commissioning wall mounted Split type AC 1.0 TR capacity units indoor/outdoor complete with cordless remote control unit, 220-240 volt, 50Hz, single phase fitted with high quality rotary compressor and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating complete as directed. Note : (a) Rate of supporting brackets for outdoor unit is deemed to be included in rate quoted.

Supply and install vertical pack typeunits indoor/outdoor complete withcordless remote control unit, twin rotary compressor, single phase units 220V - 240V, 50 Hz of capacity 2.5 TR Note : (a) Rate of supporting brackets for outdoor unit is deemed to be included in rate quoted.

Supply and fix Single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240V all as directed incl taking down old existing unsv enclosure complete all as specified and directed.

M&L for submain wiring with 2 runs of 4 sqmm and one run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

Supply, fixing and clamping , jointing copper tubing for suction line and for liquid discharge line insulated with suitable insulation material including making hole in wall for passing through and making good disturbed surface complete all as specified and directed.

S/F exhaust fans in metalic body with powder coated paint , Single piece plastic blade AC Single Phase 230 V capacitor run motor of size 300 mm sweep (Heavy duty), including louvers/shutter and connecting up 3 core flexible cord of size 23/0.0076mm from ceiling rose to exhaust fan complete all as specified and directed.

Supply and fixing in repair new generation 20W 4F LED batern for surface and pendent application, anodized extruded aluminium housing, high transmissitvity diffuser high lumen output complete fixing arrangement all as specified and directed.Make : Bajaj/ CG/Surya/ Philips.

All as per item No. 113 above but of size 2X4.0 sqmm+1x4.0 sqmm size in pvc casing caping of suitable size complete all as specified and directed .

Supply laying & testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 16 sqmm 4 core all as specified and directed .

S & F in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar complete all as specified and directed.

S&F in repair sheet metal enclosure TPN DB VTPN 4 Way,415V with 250A copper busbar, double door type IP-54, IK-09 protection suitable for housing MCCB 100Amp 4 pole all as specified and directed by EIC. Note : DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding.

S & F MCCB 4 P 125 Amps,16KA, complete all as specified and directed.

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed .

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for One 5pin, 15 Amps switch socket combination on same board

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core complete all as specified and as directed.

SACHINENTERPRISES

SHREE JAGDISH FURNITURE CO.