SPECIAL REPAIR TO BUILDING NO P-800M OF CNA (OF) JABALPUR

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified.

Framed work such as grills, gratings, etc., with ends of bar shoulder or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290 GDE -E-165

Taking down Aluminium Partition,door and windows shutter and refixing in same opening after necessary repair from joining cleats, glazing clips ,rubber nepprane packing, snap beading etc

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. all as specified.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

S&F factory made solid PVC moulded door shutter with wood core free EPS 28 to 30 mm thick (style) ,2,4 or 6 raised panel designe with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm thick prelam PVC sheet on the Back face supplying and fixing in the frame at site as per specification & drawing.

S&F in repair 18 to 20 mm thick PVC solid board with one side decorative choice laminate and other side balancing white as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F 50 mm long Stainless steel butt hinges, medium weight, and fixed

S&F Brass handles 100mm size, cast type, polished bright

S&F Powder coated Anodised Aluminium frame and shutters for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty & fixed

Supply and fix in repair aluminium door closer aluminium die cast body hydraulically regulated designation no.3, universal type suitable for door shutter of 851 to 1000mm in width and fixed complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips

S&F 3.00 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane.

S&F 5.5 mm thick tinted glass fixed with & including PVC/neoprene gasket, angular glazing aluminium beads , rubber packing, locking arragements for sliding windows complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F 12 mm thick toughned glass door with two nos Handle and locking arrangement all as specified.

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles

Brick work with sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed

M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) and as directed.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L Rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement.

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed.

Preparation of new plastered surface of wall by applying 2 mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed.

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as spd and directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed.

Preparation of old surface after complete removal of existing treatment applying 2 mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed.

M&L two coats of white wash on surface of wall including preparation of old plastered surface complete all as spd and directed.

M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as spd and directed.

Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coat of cement base paint over a coat of alkali-resistant priming paint all as specified & directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed.

Cement concrete type C-1, 1:3:6 (using 40mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair complete all as specified

Material and labour for 25mm thick PCC 1:2:4, type BO, using 12.5mm graded stone aggregate as in sub floor to receive any type of tiles complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding and removal of debris out of premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes all as spd and directed

S&F light shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6)

S&F light shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in Skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM(1:4)

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) complete all as spd & directed.

M&L for Heavy Duty Parking tiles 300 x 300 x 8 to 10 mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes all as spd and directed

M&L 20 mm thick Granite (of any type) work (table rubbed & polished) in steps ,Trades,Riser,skirting, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed in CM 1:4 all as spd & directed.

Round chamfering, to the edges of granite n.exc 15mm wide on granite stone shelves.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided

Precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) set in cement mortar 1:4 as in slab for water tank/shelf, landings, cooking plateform cover slabs (for man holes etc) chullah hoods, chajjas, water trough, managers, shelves & similar articles with plain faces

TMT bars 6 mm to 8 mm dia cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to all as spd and directed.

Dismantling Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards /slabs/blankets, any thickness, including cover fillets

Material & Labour for suspended false ceiling system using Chicago metallic (E grid) exposed suspended system of gird, section size 600 mm x 600 mm comprisisng of GI powder coated main 39 mm x 24 mm x 0.80 mm thick (thickness comprising of GI / 0.40 + PPPCGS / 0.30) Cross Tee 29 mm x 24 mm x 0.80mm thick and wall angle 22.2 mm x 22.2 mm x 0.65 mm thick with and including 4 mm thick HPSC (High pressure steam cured) pre-primed and one faced painted self imposed textured designer board to be placed in the grid system duly suspended with 4 mm dia GI bar hangers fixed with steel dash fasterners from purlins of the roof with clips including provn for light fixture complete all as specified and directed.

Material and labour GI frame work of grid 605 X 605mm for seamless ceilling comprising of GI perimeter comprissing of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding walls using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flange of 15mm each and web of 45mm suspended from soffit at approx of 900mm c/c with GI cleat and steel expansion fastner including ceilling section nexc 1.2m length of 0.55mm thickness having curled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediat channel with connectiong clips accross the intermediat channels at 457mm centre to centre complete all as directed.

Material and labour 10mm thick plaster of paris ceiling (gypsum anhydrous) to flat surface on metal frame work for seamless celling and reinforced with G.I. wire mesh for any sunk or raised moulding complete all as directed. Note:- Design of ceiling as approved by Garrison Engineer and Flat measurement will be measured.Metal frame work shall be measured and paid separately under relavent item.

Preparation of new surface of ceiling and applying 2 mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed.

S & F Solid PVC Wall Lining consisting of 5mm thick single side Prelam PVC sheet used inclusive of solvent cement & fixing at site on PVC frame as per specification & drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification & drawing

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

S&F stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs complete all as spd and directed.

S & F in repairs Vitreous china oval shaped counter type wash basin, white including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread ,brass, chromium plated for glazed ware sinks, basins, etc., with long screwed shanks & fly-nuts all as spd and directed

S&F 15mm bore Swan neck pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed.

S&F in repair towel rail CP 600 mm long complete all as specified and directed.

S& F in repair Corner Sheet glass shelf assembly consisting of 5.5mm thick sheet glass as per sample directed by Engr in Charge

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of Plastic water closet seat, black/white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminized hinging devices complete all as specified and as directed.

Supply and fix in repair single piece suite (WC + cistern) complete all as specified and directed. Make:- Jaguar series: Vignette/ Opal or equivalent make of parryware.

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

Viterous china urinals, half stall type, fixed in repair incl including waste copling 32mm size full thread ,brass, chromium plated, waste pipe and all necessary fittings, complete all as specified and directed.

S&F Brass Chromiun plated Urinal Spreader fixed with Half stall urinal.

S&F Brass Chromiun plated Toilet paper Holder.

S&F Brass Chromiun plated health faucet fixed with 1.50 mtr Stainless steel flexible pipe to EWC and Angular Stop Cock complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified & directed.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore.

S&F in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F in repair 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F in repair Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F in repair in 75 mm bore cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F in repair 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door

S&F in repair Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

S&F in repair cast iron cowl for 100 mm dia all as directed by Engr-in-charge.

M&L in repair 150x100 mm Salt glazed stoneware gully traps, square or round mouthed, type‘P’

Demolition of cement concrete (unreinforced) in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete.

M&L of Cement concrete type B0, 1:2:4 (12.50 mm graded aggregate) as in roof kerb, padding over roof , benching of chajjas, for filling depression and making proper slope complete all as directed

Supplying only Integral waterproofing compound

M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete :- Terrace water proofing by smartcare Magnum Surface prparation: Minor cleaning work,removal of loose concrete and filling cracks with polymer modified mortar using smartcare SRP ii) Making of angle fillets all around the perphery of the wall with polymer modified mortar using smart care SRP cracks/construction joint treatment: Drilling holes in the concrete surface at every 3 feet installing socket with polymer mortar using asian paints smartcare iii) Suppling and grouting the gaps around the pipe/inserts with smart care general purpose grout a non shrink cementitious waterproof grout ,The Nahani trap etc is to be fitted securely in the same manner.Providing 3 coats of smart care PU magnum and 40-50 gms polyster fleece sandwiched between 1st and 2nd coat completely up to the top edge of the pipe etc complete as per manufactures instructions iv) Supplying and applying High build elastomeric wateproofing coating based on pure, hydrophobic polyurethane,cold applied of spray/brush applied,membrane with an elongation of 350% and tensile strength of 4.7 N/mm2 as per AST D402 crack bridging ability of 3mm.the system includes final base preparation,water based primer and applying smart care PU magnum in two to three coats to acheive a min.thickness of 1.2mm etc complete as per Manufacturere specifications.

Loosely lay 150 GSM Geotextile(non woven polyster)with a min of 100mm wide overlap after which drains boards and soiling can be allowed

Laying protective screed of M20 grade with slope1;100 containing 12mm 100% virgin polyproylene fibers 0.9 kg per cum with a broom finish well compacated curing for 7 days etc complete .The screed shall be laid in panels with 10mm wide construction joint and filling the panel joints with polysulphide sealent,smartcare PU sealent.

S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete; gear operated type with chain wheel & hand chain Thickness of laths 1.25 mm incl Taking Down Old Rolling shutter.

M&L Preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over one coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfaces Complete

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc, complete and all as directed.

M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19 mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etcand making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces all as specified and directed for :- (Note:- (i) Cost for cutting chases and concealing the conduit pipe in existing wall is deemed to be included in the item rate quoted. (ii) Conduit will not be concealed in ceiling but fixed on ceiling surface only.)

All as per item No. 102 here in before but with one 3 pin, 5 amps, socket outlet on the same board.

All as per item No. 102 here in before but with one 3 pin, 5 amps socket outlet on independent board.

Description same all as per item No. 102 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge.

Description same all as per item No. 102 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 4 Sqmm main & with 4 Sqmm earth multi-strand copper conductor cable as earth wire complete all as specified & directed by Engineer-in-Charge.

M&L of Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed.Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable shall be measured as one unit run.

Supply and fix modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as directed.

Supply and fix modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 module flush type, ISI marked complete all as directed.

Supply and fix switch modular 16 amps, flush type, ISI marked complete all as directed.

Supply and fix modular socket 2/3 pin combined, 6/16 amps 2 module, flush type, ISI marked complete all as directed.

Supply and fix modular bell push, 1 module, 6 amps, complete all as directed.

Supply and fix sheet metal enclosures for SPN with two pin and earth plug and socket with one single pole MCB 20 amps complete all as directed.

Supply and fix bell AC 230 volts, single pole complete all as directed.

S&F in replacement MS Housing box 1 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 2 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 3 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement MS Housing box 6 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 1 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 2 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 3 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

S&F in replacement of frame plate for modular switch 6 module including screws and washers etc model/make as per existing in site complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, three terminal complete all as directed.

Supply and fix LED 12 watts recessed/surface mounted downlighter spotlight fitting, 110 lumen per watts, decorative type with all accessaries and proper connection from fitting to existing point as per site requirement and making the surface smooth complete all as directed.

Supply and fix LED tube light fitting box type 20 watts, 2000-2200 luminaire with poly carbonate LED upto 2100 lumin tube rod with in built reflector of same make, connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0. 20mm with two Nos. MS bracket on wall including hanging arrangment and necessary fixing arrangement complete all as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type, as directed, with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

Supply and fix LED lamp 9W LED bulb,230 V complete all as specified and directed.

Supply and fix modular telephone socket, one module, ISI marked complete all as directed.

Supply and fix modular RJ45 cat6 Data socket, one module,10 A,single pin ISI marked complete all as directed.

Supply and fix modular stepped type electronic fan regulator flush type, two module on the existing phenolic laminated etc., as required, single pole, 240 volts, grade 120W watts, 2 Module heavy duty and ISI marked complete all as directed.

Taking down carefully ceiling fan/exhaust fan any size/make with cable and all accessoreis remove from site to store for repair/overhaulling complete all as directed.

Maintenance and checking of ceiling fan/exhaust fan of any size/type/make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting/hanging in original position, reconnecting the electric cables and testing complete, all as directed.

Supply and hanging of ceiling fan, BEE 5 star (ES-50) rated high speed 1200 mm sweep(BLDC) complete with blades,downrods,and all accessories as required and provision of 3 core flexible copper conductor cable of suitable size and connecting up from existing ceiling rose to fan complete all as directed.

Supply and fixing and testing of 200 mm sweep exhaust fan 230 volt with automatic shutter, complete all as specified and directed.

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, TP & N, double door type, 440 Volt with 200 amps rated busbar suitable for MCCB 100 Amps,4 pole incomer complete all as directed.(Note : MCBs will be Measured separately)

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as directed.(Note : MCBs will be Measured separately)

Supply and Fixing MCCB, four pole, 100 Amp, 415 Volt, of breaking capacity 16 KA complete all as directed.

Supply and fix MCB, SPN, 240 volts, 63 amps capacity, 'C' series complete all as directed.

Supply and fix MCB, SP, 240 volts, 5 to 32 amps capacity, 'C' series complete all as directed.

Supply and fixing GI steel tubing 50 mm bore, light grade, IS Marked including all fittings, laid in trenches complete all as directed.

Supply and fix rigid non metallic, medium grade, PVC conduit, concealed type of size 25 mm with all accessaries such as couplers, lock nuts, saddles, pipe hook, tees, bends, etc., including cutting chases for conduits and making good the disturbed surface with PCC as per site requirement complete all as directed.

Supply and fix rigid non metallic, medium grade, PVC conduite, concealed type of size 32 mm with all accessaries such as couplers, lock nuts, saddles, pipe hook, tees, bends, etc., including cutting chases for conduits and making good the disturbed surface with PCC as per site requirement complete all as directed.

Taking down old unserviceable Sub main wiring with aluminium/copper conductor, any type/size complete with/without conduit and remove from site all as directed.

Taking down old unserviceable DBs/Main switches any type/size complete with all accessories and remove from site all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core with using suitable size of thimble and glands complete all as directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia of Make;-Telerex/Tirupati or E-in-C approved Make

M/L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M/L for Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on completion all as directed. Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate.

Supply and fixing earth continuity conductor 4mm dia GI wire fixed on wall recessed / burride in ground / drawn in conduit or pipe compete all directed.

Schedule of credit amount of Rs. 21497.50 to be deducted during AOC

m/s R K SETHI

M/S. HONEY CONSTRUCTIONS