PROVSN OF DEFICIENT FACILITIES FOR PROJECT OFFICE OUT OF PROJECT CONTIGENCIES OF THE WORKS PROVSN OF SINGLE LIVING ACCN OF SAGAR PRAHARI BAL GOA AT INS GOMANTAK PROVISION OF DEFICIENT INTERNATIONAL OFFICERS TRAINEES ACCN AT NIH GOA UNDER GE P VASCO

Amount

Schedule 'A' Part I - B/R Portion

Excavation in trenches in soft / disintegrated rock n exc 1.5m deep and n.exc 1.5m wide and getting out, etc complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or in drains (not exceeding 1.5m in width or 10 sqn on plan), including dressing of sides and rammíng of bottoms, lift upto 1.5m, including getting out thc excavatcd soil and getting out the excavated soil directed within a lead of 50m complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Returning filling including, spreading, leveling, watering and well rammimg in layers not exc 25cm deep as in soft/ disintegrated rock complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where didrected at a lavel n.exc 1.5m above the starting point in soft / disintegrated rock complete all as specified and directed.

M&L for PCC in foundation filling and mass concrete type D2 1:4:8 (40mnm graded stone aggregate) complete all as specified and directed.

M&L precast cement concrete block masonry in 1:5:10 with solid blocks,exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed.

M &L for moorum / red bajari filling in under floor or pavings, laid in layers n.exc. 15cm thick, spread levelled, and rammed including watering complete all as specified and directed.

M&L hardcore of gauage exc 63mm butn Exc 100mm, deposited, spread and |levelled in layers n exc 15 cm thick watered and rooled rammed to a true surface broken stone or boulders, complete all as specified and directed

M&L cement concrete type 1:4:8 D-2 (40mm graded aggregate) asin subbase 100 mm tick complete all as specified and directed

M&L 40mm thick cement concrete type 1:2:4, B-1 (20mm graded aggregate) complete all as specified and directed

M&L rendering in CM 1:4, 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed

M&L rendering in CM 1:6, 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed

S & F joist, channel, angle, or tee section, fixed independently, without connecting plates, etc (cut to ordinary lengths ie within 20mm of the length indicated complete ball as specified and directed.

S&Frolled section as in main and cross beam hip and jack rafters, purlins where connected to common rafter and runing railes and guiders for sliding doors fixed with angle cleats or other connecting plate complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or squar heads at one end and screwed the other, or screwed both ends, each screwed end to be fittedwith washers and one hexagonal or squar nuts, n exc 5cm long complete all as specified and directed

M&L for preparation of new steel surface, of any description not other wise described over 10cm in width or grith and applying two coat of red oxide zinc chorme primer complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/clading to wall fixed with self tapping screws complete all as specified and directed.

M&L for PCC (1:5:10) type E2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L in filling under floors, spreading and leveling in layers n.exc 25cm thick and well ramming including watering as required complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded aggregate) in sub base of flooring 100mm thick complete all as specified and directed.

M&L 15 mm thick Screed bed or bedding layer or mortar in CM (1:6) for laying floor finishes complete all as specified and directed.

M &L Non Skid coloured ceramic tiles 7 to Smm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L rendering 1Omm thick on stone masonry wall in cement mortar 1:4 for backing coat of skirting, dado etc complete all as specified and directed.

M &L Glazed ceramic coloured tiles in vertical surface 300x200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L rendering 1 5mm thick on brick/ concrete surfaces on wall surfaces in two coats 10mm 1:6 and 5mm in 1:4 finishing coat with WPC and finish the surface even and smooth complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L preparing new plastered wall surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparing new plastered surface and applying two coats of anti fungal paint appex ultima or cquivalent over a coat of primer on wall complete all as specified and directed.

M&L factory made Solid PVC Door Frame of size 50nm x 47m made out of 5mun plain colour PVC shect reinforced with M.S Square tube, supplying & fixing in opening as per specitication & drawing complete all as specified and directed.

M&L Factory made solid pancl pace door shutter 30mm thick (style) consisting of frame made out of MS. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L powder coated aluminium frame with shutter for doors, windows ventilators with one or more rebates including necessary joining cleats, glazing clips, rubber packing, anodised |aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) suitable handle/ lock (1 no.) complete all as specified

S&F 4mm thick sheet glass, ordinary quality and glazing within oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 75 mm mild steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F 100 mm anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 200mm aaluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clops of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.

M&L Cement concrete 1:3:6 type C-2,100mm thick for plinth protection complete all as specified and directed.

S&F wash basins, Vitreous china flat back of size 550mmx400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Supply and fix 32mm dia brass chromium plated bottle traps for wash basin with inlet and outlet |screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F 32mm waste fittings , brass chromium plated or glazed ware sinks, basins etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F vitreous china wash down water closet (pedestal patterm) white (excluding fixing bolts, flushing cistern and flush pipe) with plastic water closet seat including fixing of flushing cistern.

Supply only PVC valve less, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S & F chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete.

S&F PVC connections 15mm size with PTMT nuts of length of 450mm complete all as specified and directed.

S&F 15mm fancy type, chromium plated bib taps, with crunch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot' or 'Cold' with long screwed shanks and tly nuts, screwed for iron pipes complete all as specified and directed.

S&F 20mm angle stop valves fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S &F waste pipe 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S &F waste pipe 11Omm dia PVC (SWR) pipes single sockcted, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 20mm unplasticized PVC pipes of pressure rating 10Kgf/Cm2 fixed completc to walls, cilings or in floors etc complete all as specified and directed.

S&F 15mm unplasticized PVC pipes of pressure rating 10Kgf/Cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

M&L precast reinforcement cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in lintels including necessary formwork etc but excluding reinforcement complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(anncaled) not less than 0.9mm dia or sccuring with clips complete all as specified and directed.

Ditto item No 54 but 6mm to 8mm dia complete all as specified and directed complete all as specified and directed.

S&F steel work in tubular trusses ,raflers,purlins etc including special shaped washers, posts, purlins etc complete using ERW or induction butt welded tubes conforming to IS-4923-1968 grade St-240 complete all as specified and directed.

Schedule 'A' Part II- Internal Electric Supply

Point wiring with PVC insulated unsheathed FRLS multi stranded Copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathad stranded copper conductor cable of size 1.5 Sq mm for phase Red, neutral Black and earth Green drawn in and including, PVC medium grade conduit not less then 25 mm dia ivory colour concealed in walls/roof with GI sheet metel sunken modular switch/Terminal box 1.2 mm thick and Modular white cover plate and brass screws with cup washers complete all as specified and directed. Note: (1) Rate is inclusive of Cutting/ chases of wall/ floor/ceiling

One light point controlled by one way switch

S&F modular Switch piano flusth type single pole one way 6 amps.

S&F Ceiling rose, polycarbonate body three terminal

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink environmental friendly Energy efficient ready to use pack ,1x18/20 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver .connector block etc with all accessories intenal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps complete all as specified and directed.

S&F LED tube light fittings decorative ultra sim linear fixture with extruded aluminium heat sink environmental friendly Energy efficient ready to use pack,1x110 Watt, 2 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver connector block etc with al accessories internal pre wired & including connecting up with 2 core flexible copper Conductor cable with suitable size & suitable for and mounting clamps PVC squre box. 75x75mm-2 nos etc complete all as specified and directed.

Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth contnuity conductor of size 2.5 Sqmm to be drawn through in and including PVC conduit fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- (i) 2x 2.5 sqmm for phase & neutral and 01 x 2.5 sqmm for earth. PVC conduit shall be measured as one unit complete all as specified and directed.

K M SUBHANAIAH