GENERAL FUND 2024-2025

Amount

Earthwork Excavation for foundation in all types of soils and sub soils including soft disintegrated rock and soft rock to the full depth including all leads and lifts etc., complete complying with the standard specification, drawing and as directed by the departmental Engineers.

Supplying and filling with approved quality of Stone Dust to filling in foundation and basement and filling the site in layers of not more than 15cm thick etc., complete. Complying with standard specifications and drawings and has directed by departmental Engineers

Cement concrete of mix 1:4:8 (one cement – four sand – eight broken stone) using Hard broken granite stone jelly of 40 mm gauge for foundation leveling course, standard specifications and drawings and has directed by departmental Engineers. Including cost and conveyance of all materials to working site, laying concrete and curing etc.

Centering charges of RCC Works for slab and beams including cost and conveyance and all labour charges etc., complete as per standard specifications.

RCC 1:1.5:3 mix using 20mm ISS HBG Metal including cost and conveyance of all materials and labour charges etc., as per standard specification.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Brick work in cement mortar 1:5 (one cement five sand) using best quality country bricks including cost and conveyance of all materials to working site in super sector curing etc. complete. Complying with standard specifications and has directed by departmental Engineers. Including cost and conveyance of all materials to working site etc.

Ceiling Plastering with cement mortar 1:3 (one cement three sand) 10 mm thick etc., Complete.

Cement paint Two coats with good quality of approved cement paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains SD-70 (Service Main)

VIJAYAN M (BID ID -1207211)