PROVN OF TILES IN BLDG IN LIEU OF WOODEN FLOOR AND JOINERY AND SANITARY FITTING IN BLDG NO S-13 AND S-15 AND S-16 (OR FAFA ACCN) OF ARC AND PROVN OF 01 X SEPTIC TANK (150 USERS) ALONGWITH SOAKAGE WELL FOR MD ACCN NO A-126 AND A-127 AND A-130 AT K LIN

Amount

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for providing Hardcore of gauge n exc. 63 mm size broken stone or boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 ( Using 40mm graded agg) as in foundation and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (12.5 mm graded aggregate) as in levelling course complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and directed.of tile complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and directed.of tile including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 300 mm X 450 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick backing coat in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall including roughening surfaces of old plastered concrete work by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M & for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like laid over and including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces and finishing even & smooth without using extra cement including taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site omplete all as specified and as directed.

M&L for rendering 15 mm thick on concrete surface 10 mm thick in cement mortar (1:6) as backing coat and finishing coat 5 mm th in CM 1:4 using finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and as directed on External surface. Note:- WPC will be measured & Paid separately

M & L for rendering 05 mm thick in CM 1:3 on ceiling surfaces of cement concrete and finished the surface even and smooth without using extra cement complete all as specified & directed.

M & L for preparation of new plastered/concrete surfaces of walls, providing one more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint omplete all as specified and as directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame not exc 1.50 sqm & removing from site complete all as specified and directed.

Taking down shutter of any description n.exc 1 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc 2.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m n exc each Sqm each and refixing in same opening complete all as specified and as directed.

S&F MS flat iron such as small articles for hold fast and similar work complete all as specified and as directed.

M&L PCC (1:2:4) type B1 (20mm graded Aggregate) for fixing hold fast complete all as specified and as directed.

Supply and fixing 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed.

Supply and fixing 2nd class HW 35mm thick plain framed panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.

Supply and fixing 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply and fixing 2nd class HW 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n exc 0.50 sqm complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface exc 10cm width or girth and applying of two coat of synthetic enamel paint over one coat of red oxide all as specified and directed by Engr-in-charge.

Supply and fixing 100mm size butt hinges cold rolled medium weight, ISI marked complete all as specified and directed.

Supply and fixing 200mm size MS barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.

Supply and fixing 150mm size MS pressed handle oval type stove enameled block complete all as specified and directed.

Supply and fixing 250mm long MS sliding door bolt, plate type, stove enameled black with bright bolt not less than 12mm dia with and including a min of siz bolt & nuts four on bolt & two on staple,ISI marked, complete all as specified and directed.

Supply and fixing 150 mm size Aluminium anodised barrel tower bolt complete all as specified and directed.

Supply and fixing 150 mm size aluminium handle complete all as specified and directed.

S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples comlete all as specified and as directed.

Demolition of plain cement concrete (unreinforced) Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for water proofing treatment to RCC Sunken slab, including parapet comprising with the following courses of treatment/specification from bottom to top:- (i) Taking out old sunken treatment and roughening the same old concrete slab by picking, sweeping clean and washing down with water to remove dust etc.and applying cement slurry @3kg/Sqm (ii) Screed bed or bedding layer of mortar 1:4 in 15 mm thick for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be measured and paid for under separate items) and maintaining slope of 1:20 upto spout pipe.

M&L for two coats of epoxy resin/polymer modified cementations coating like brush bond of forsook or equivalent, both on floor & beams all as specified and directed (make : SIKA cemcrete or equivalent)

Supply and fix 50 mm bore galvanised steel water tubing, medium grade for spout pipe in sunken floor including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting all as specified and directed.

Taking down GI tubing 15mm dia and connection including removable to store complete all as specified and directed.

Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified and directed.

Taking down GI tubing 20mm dia and connection including removable to store complete all as specified and directed.

Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified and directed.

M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed.

S&F in repair 15mm bore stop cock cast copper alloy, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F in repair 15 mm bore CP fancy type bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15 mm bore CP fancy type 2 in 1 bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F as in repairs.Vitreous China wash down water down water closet pan (pedestal pattern- P trap), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed.

S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bend with access door of 110mm bore complete all as specified.

S&F in repairs PVC (SWR) bend with access door of 75mm bore ccomplete all as specified and directed.

S&F in repair PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm dia in junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repair 75mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Complete removal existing treatment and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- (a) Primer and emulsion application to be carried out through air less spray machine ( Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied) (b) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c) Cost of scafolding upto 10m hight of building is included in this item.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Excavation over areas n.exc 1.5 m deep in soft and loose soil and getting out all as specified and directed.

Excavation over areas exc 1.5 m but n.exc 3.0 m deep in soft & loose soil and getting out all as specified and directed.

Excavation over areas exc 3.0 m but n.exc 4.5 m deep in soft & loose soil and getting out all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 M in depth as in foundation in soft or loose soil and getting out complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

M&L for PCC 1:2:4 type B2 ( Using 40mm graded agg) as in foundation and mass concrete complete all as specified and directed.

M&L for RCC 1:1.5:3 types A1 (20mm graded aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like;any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed.

M&L for RCC 1:1.5:3 types A1 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for Reinforced cement concrete 1;2:4, Type-B1 (20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for Reinforceed cement concrete 1:2:4 Type B1 (20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for Reinforced cement concrete, Type-B1, 1:2:4 (20mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20mm size graded brick aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs in shelves and the like complete all as specified and directed.

M & L, Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Formwork to sides of concrete of rough finished on flat surfaces in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork in rough finished surfaces of of rectangular, square or polygonal sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Formwork to sides and soffits in rough finished flat surfaces of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Form work to soffits of suspended slab such as roof slabs, floor slabs landing and similar work not exc. 200mm thick(Horizontal or Sloping) complete all as specified and directed.

M&L for precast cement concrete block massonry PCC 1:3:6 type C1 using 20mm graded with solid block exceeding 10cm in width and setting in CM (1:6) complete all as specified and directed.

M& L for Providing precast RCC type B1 1:2:4 (20 mm graded aggreagae) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces® complete all as specified and directed.

M&L for rendering 10mm thick plaster in cm (1:4) on fair faces of brick work or concrete surfaces including finishing even & smooth without using extra cement.

M & L for Loose filling with broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M&L for salt glazed stone ware drain pipes 150 mm bore grade ‘A’ laid in trenches and jointed in cement mortar (1:1) including testing complete all as specified and directed

M & L for cement concrete (1:4:8) type D-2 (using 40 mm grade stone aggrete)as in concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe all as specified and directed.

Surface dressing n exc 15 cm deep and getting out in soft/loose soil etc complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in soft/loose soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and directed.

M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface using broken stone or Boulders complete all as specified and directed.

M& L for 40 mm thick cement concrete type B1 (1:2:4) using 20 mm graded crushed stone aggregates) as in floor finishing the surface even and smooth using extra cement complete all as specified and directed.

M & L for 75mm thick cement concrete 1:3:6 type C2, using 40 mm graded aggregate as in plinth protection and finishing surface even and smooth using extra cement complete all as specified and directed.

M&L for rendring 15mm thick plaster in cm (1:4) on fair faces of brick work or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed.

S & F for Steel work in tubular trusses, poles, purlins, etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1998, grade ST.-240, complete all as specified and directed.

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections conforming to Fe 410 -W (Gde- E- 250) quality-A, complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping scews complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping scews complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S&F PVC gutter , Half Round, 180mm size complete all as specified and directed.

S&F in repairs Joint Bracket (with 2 clamps), 180mm for PVC pipes (half round) complete all as specified and directed.

S&F in repairs Support Bracket, 180mm for PVC pipes (half round) complete all as specified and directed.

S&F in repairs Running Outlet (with 2 clamps), 180mm for PVC pipes (half round) complete all as specified and directed.

S&F in repairs Stop End Outlet (with 1 clamp), 180mm for PVC pipes (half round) complete all as specified and directed.

S&F in repairs PVC Reducer, 180mmx110mm complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) single core PVC insulated 1100 Volts, grade multi stranded copper conductor unsheathed in and including concealed PVC conduit and conduit fittings and accessories with suitable size of sunk type cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete One light point controlled by one-one way switch. all as specified and directed by Eng.-in-charge.

S&F switch piano flush, button type 5 Amp SP complete all as specified.

S&F ceiling rose surface 3 terminals 65x50 mm. complete all as specified.

S&F sheet metal enclosures 240 volt with suitable rated bus bar for 4 way double door DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going complete all as specified and directed by Engr-in-charge.

S&F MCB single pole and neutral 240 Volt 10 KA 40 Amp complete all as specified & directed.

S&F MCB single pole 'C' series 240 volt 10 KA 5 to 40 Amp conforming to relevant IS.

Supply and fix 18 W LED light fitting wall mounted batten 4'ft , extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for laying of cable/erection of pole and getting out in soft/loose all complete as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in hard/dense soil complete all as specified and as directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness all complete as specified and as directed. Note :- Only punned down sand shall be measured.

M&L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable complete.

Supply, laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty with stranded aluminium conductor, 1100 volts grade of size 6 sqmm 2 core complete all as specified and as directed.

M/S. Ranjit Kumar (BID ID -3314209)

M/s Nishi Kumar Das (BID ID -3314332)

S K Construction (BID ID -3312768)

MS HO Shadap (BID ID -3312782)

M/S U.K ENTERPRISE (BID ID -3313779)

M/S SAMAL CONSTRUCTION (BID ID -3313630)

M/S Thapa Construction (BID ID -3311803)