EXPANSION OF EXISTING EMERGENCY ROOM FROM 01 BED TO 04 BED AT AIR FORCE STATION JAISALMER

Amount

Taking down door chowkats or frames exc.1.5sqm but nexc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:6 etc complete all as specified and directed.

M&L fo Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for preparing new plaster surfaces and applying 2mm thick ready mixed wall care putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete of wall complete all as specified and directed.

M&L for complete removal of existing treatment, filling up undulation and applying 2mm thick readymixed wall care putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete of wall etc complete all as specified and directed.

M & L for prepariation of old treated surfaces and applying two coats of white wash on surfaces of ceiling complete all as specified and directed.

Demolition of tiles of any description or thickness in floors, aprons etc.complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed.

M&L for Vitrified Light shade ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles exc 0.18 sqm but not exc 0.36 sqm n floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Light shade Vitrified coloured ceramic tiles 10 mm thick as in skirting over and including 10m thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm (400x400), in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for (300mm x450mm) x 6 to 7 mm thick coloured glazed ceramic wall tiles as in Walls/skirting/dado etc over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and Fix of GI snap grid frame work for false ceiling of size 605x 605 mm, supported with GI hanging wires from roof complete all as specified and directed.

M&L for Providing and fixing 10mm thick prelaminated plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd metal frame work and reinforced with G.I. wire mesh complete all as specified and directed.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for Frame and shutters of doors, windows & ventilators and frames for partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for Block boards,12 mm thick grade 2 quality, interior grade, decorative type with decorative face veneer on both faces, fixed to aluminium framework in partitions and similar work complete all as specified and directed.

S&F for solid PVC door frame of size 50 x 47 mm made out of 5 mm th rigid PVC foam sheet reinforced with MS square tube as per specification complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing complete all as specified and directed.

S&F for 100mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodisedand fixed type B-21 complete all as specified and directed.

S&F for Extruded aluminium alloy handles, Size of the handle 150mm, fabricated type, anodised complete all as specified and directed.

S&F for Aluminium anodised, barrel tower bolts of size 150mm of extruded section complete all as specified and directed.

S&F for Mortice latch with two levers (vertical type), brass body, length of the latch 100mm complete all as specified and directed.

S&F for wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste coupling, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe/Waste pipe complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottomand cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F for PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling etc and mass concrete all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore dia PVC (SWR) 'P’ trap complete all as specified and directed.

S&F for PVC (SWR) floor trap, diameter of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints laid in trenches/floor or fixed to walls including digging and making good as existing complete all as specified and directed.

S&F for PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to walls including digging and making good as existing complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) bend any radius complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) bend any radius complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall complete all as specified and directed.

S&F for steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified and directed.

S&F for steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified and directed.

S&F for hand shower (health faucet) (ABs body) with 8mm dia one meter long flexible tube in chrome finish incl wall hook & wall work incl fixing complete all as specified and directed. (Make : JAQUAR or equivalent)

S&F for 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F for 15 mm bore Fancy type pillar taps long neck/ swan neck, cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F for fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F for Stainless steel curtain rod 25mm dia with side bracket fixed with stainless steel matching pair of brackets fixed at both ends with screws on walls/beam, complete all as specified and directed.

S&F for PVC connections suitable for 15 mm dia pipe with PTMT nut of length 600 mm complete all as specified and directed.

M&L for Rlled mild steel sections Fe-290 Grade E-165 in Joist, channel, angle, or tee sections, Tube Sections fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including drilling holes for screwing, etc complete all as specified and as directed.

M&L for preparation of new steel surfaces, priming with red oxide zinc chrome and painting 02 coats with synthetic enamel paint on Steel Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

M&L for Block boards 18/19mm thick, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces, fixed to mild steel framing as in shelves complete all as specified and directed.

M&L for surgical scrub station, stainless steel, tap operated manual, Number of taps 02 (Two in each scrub station), all as specified and as directed by Engineer In Charge and Sample of Scrub Station as Approved by GE.

Supply, install and testing of cassette type air conditioner units indoor and outdoor complete with cordless remote control unit ,twin rotary compressor, single phase units 220V -240V, 50 Hz of capacity 2.0 TR complete all as specified and directed. Note :- 1. Cost of company recommended suction and discharge copper pipe from indoor unit to outdoor unit shall be deemed to be included in the quoted rate. No extra payment shall be made. 2. Suitable size copper wire as recommended by the OEM from indoor unit to outdoor unit shall be deemed to be included in the quoted rate. 3. Cost for insulation of suction and discharge pipe and drain pipe from indoor unit to outdoor unit shall be deemed to be included in the quoted rate. 4. Addition/altn to false ceiling for mounting of indoor unit and fixing accessories shall be deemed to be included in the quoted rate. 5. Cost of stand/PCC platform for outdoor unit shall be deemed to be included in the quoted rate.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 4.00 Sq mm 1100 volts grade including and 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping conduit including complete all as specified and directed. Note :- Two run of 4.00 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit.

S&F in repair single pole and neutral enclosure 2 module in sheet steel with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA complete all as directed all as directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring on wooden battens/through conduit (light fan, socket or power) complete with fittings such as switches, wooden batten, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed by Engineer-in-Charge.

M&L for point wiring for controlled by one switch with PVC insulated but unsheathed single core FRLS multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly complete all as specified and directed. (a) One light point controlled by one, one way switch

(b) One fan point controlled by one, one way switch complete all as specified and directed.

(c) One socket outlet 3 Pin, 6 Amp on independent board complete all as specified and directed.

(d) One socket outlet 3 Pin, 6 Amp on same board complete all as specified and directed.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 4 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling including one run of PVC insulated FRLS copper conductor cable of 4 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board complete all as specified and directed.

S&F for switch piano flush type single pole one way 5 Amp complete all as specified and directed. (ISI Marked)

S&F for switch piano flush type single pole one way 15 Amp complete all as specified and directed. (ISI Marked)

S&F for socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed. (ISI Marked)

S&F for socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified and directed. (ISI Marked )

S&F for switch piano flush type single pole two way 5 Amp complete all as specified and directed.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body complete all as specified and directed.(ISI Marked)

M&L for submain wiring with 4 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 10.00 Sq mm 1100 volts grade including 2 single core 10.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC casing caping/conduit of suitable size complete all as specified and directed. Note :- Four run of 10.0 Sqmm cable and two run of 10.0 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down unserviceable MCCBs/MCB’s of any type complete all as specified and directed.

S&F MCB, 6 to 32 Amp, SP, 240 Volt. complete all as specified and directed by Engineer-in-Charge.

S&F MCB,TPN 100 AMP 415V 10KA 'B' curve complete all as specified and directed.

Taking down of old existing unserviceable tubelight fittings of any type complete all as specified and directed.

Supply and fixing Surface and wall mounted LED tube light fittings of cap 10W , Two feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver with all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Taking down old unserviceable Distribution board any type complete all as specified and directed.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 415 Volts 6 way triple pole and neutral complete all as directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

HINGLAZ ENTERPRISES