SPL REPAIR TO BK NO T-18 (COMPUTER LAB, TRC, AUDITORIUM AND GYM) AT APS (PRIMARY WING) MEERUT UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings. Complete all as specified & directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified & directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & directed.

S&F Anodised aluminium snap grid frame work size (605x605)mm for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & directed.

M&L for 4mm thick armstrong ceiling boards (600x600)mm fixed or laid inserted to timber/GI/Aluminium frame work with screw in ceiling. Complete all as specified & directed.

M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles exc 0.36 sqm but nexc 0.42 sqm, in floors set and joined in neat cement slurry and pointed in white or .coloured cement laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes incl dismantling of floor tiles. Complete all as specified and directed.

S&F light shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but nexc 0.42 sqm, in skiring/dado laid over and including 10mm thick rendering in cement mortar 1:4 incl dismantling of floor tiles. Complete all as specified and directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

M&L 75mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as in plinth protection. Complete all as specified & directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade "A". Complete all as specified & directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified & directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of dry distemper over a coat of primer on walls completeall as specified and direcrted.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying one coat of oil bound distemper, complete all as specified and directed

M&L for complete removal of exisitng treatment on external wall surfaces by sanding machine or any other mechanical means thereafter washing, rubbing down the surface, in order to remove dust, dirt, loose particles etc and fill the visible cracks/joints with crack seal caulking compound after cleaning the surface by clean water. Applying a coat of primer (water based primer) and allow to dry for six hours. Thereafter apply two coats of exterior grade weather proof acrylic emulsion paint. Complete all as specified and manufactures instruction and directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. Complete all as specified & directed.

M&L preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth, not otherwise described and treated with tar or coal tar black paint. Complete all as specified & directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed.

S&F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), clamps; hold fasts; wall ties; hooks for hanging fans, small articles including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

S&F glazed and skeleton shutters 30 mm thick 2nd class hardwood (HOLLOCK / CHAMP / SAL) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F Aluminium handles 75mm size, cast type, anodised complete all as specified & directed.

S&F Aluminium, anodised, barrel tower bolts 75mm long of extruded section. Complete all as specified & directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminiume wire staples. Complete all as specified & directed.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for. Complete all as specified & directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

S&F plain, framed, panelled shutters (any number of panels), of 2nd class Hardwood (HOLLOCK / CHAMP / SAL) 35mm thick with panels of timber flaton both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section. Complete all as specified & directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy. Complete all as specified & directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified & directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed.

S&F 100mm butt hinges stainless steel complete all as specified and directed.

S&F in repair aluminium door/ window/ventilator/partition shutters and frame, made out of extruded power coated aluminium sections weighing 0.55kg/m, with sliding or openable shutters including frame and necessary joining cleats, glazing clips, rubber packing, power coated aluminium snap beading, screws, channels etc. Complete and also including the following powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hook & eyes, peg stay and handles connected items wtih and including star lock and hydraulic floor spring and door closer.incl deco grill for windows/ventilator , complete all as specified and directed. Taking down existing old door/window/ventilator/partions and removing to stores. Notes:- (i) Minimum thickness of powder coating shall be not less than 15 micron for widows & ventilators and 25 microns for doors & partions. (ii) Incl Rubber beading. (iii) Design of door, window and ventilator shutters and sections to be used in their fabrications shall be as approved by the Engineer-in-Charge/GE. (iv) Incl 4.00mm thick glass for door/windows/venitlator/partions. (v) 10mm thick glass for door/partion as per site requirement. (vi) Double action floor spring hydraulically regulated floor spring for aluminium door as per site requirement. (vii) Door closer as per site requirment.

Dismantling timber framed work scantlings 40 sq. cm and over in section, in any position complete all as specified & directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Surface excavation Nexc (not exceeding) 30cm deep and averaging 15cm deep and geeting out in soft/loose soil complete all as specified & directed.

M&L for hardcore of broken Stones of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L 100mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) as in sub-base complete all as specified & directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed.

M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Material and labour for point wiring for One light point controlled by one, one way switch 05 / 06 Amps with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including new PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed.

All as per item No 49.00 here-in-before but One fan point controlled by one, one way switch 05 / 06 Amps. Complete all as specified & directed.

All as per item No 49.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. Complete all as specified & directed.

All as per item No 49.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. Complete all as specified & directed.

All as per item No 49.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. Complete all as specified & directed.

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fix in repair socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing in repair of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fix in repair switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fixing in repair steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified & directed.

Supply & fixing in repair lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified & directed.

Supply and fix in repair LED lamp 9/10 watt of make:- Havells, /Phillips/ Crompton/Surya

Supply and fixing in repair LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed.

Supply and fixing in repair round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.

Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing including taking down old unserviceable submain wiring of any size any type complete all as specified & directed. Note:- 02 x 04 Sqmm main wire + 01 x 04 Sqmm earth wire alongwith rigid non-metallic PVC conduit (25mm dia) shall be measured as one RM.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and including taking down the old distribution board of any type complete all as specified & directed. Make - ABB/ Legrand/ Schneider/Indosasian

Supply and fixing in repair MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. Make- Schneider / Legrand /ABB/Indoasian

Supply & fixing in repair MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed. Make Schneider /Legrad / ABB /Indoasian

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old unserviceable and deposited AGE E/M-II sotre yard. Complete all as specified & directed.. Make- Bajaj / Havells/crompton/Orient

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including taking down old unserviceable and deposited AGE E/M-II sotre yard. Complete all as specified & directed.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified & directed. Make ABB/ Havells/ Legrand/ Schneider/Indoasian

R.D.Builders

M/S AMAR ELEKTRO CENTRE

AR Enterprises

Manglam Engineers and Construction Co

BHAGWAN DAS & Co

Tayal Builders

Shikha Enterprises

Arun Construction Co.